We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.

Physical Review AJun 13, 2000185 citations

Beating the density limit by continuously loading a dipole trap from millikelvin-hot magnesium atoms

Matthias Riedmann, Hrishikesh Kelkar, Temmo Wübbena +8 more

We load ${10}^{5}$ magnesium atoms in a dipole trap from a millikelvin-hot magneto-optical trap (MOT) using a continuous-loading scheme. Light-assisted two-body processes limit the maximum achievable density in a MOT, resulting in a reduced transfer efficiency into a dipole trap when using the conventional sequential scheme. It is overcome in a continuous-loading scheme where a loss channel is opened in the MOT. This allows the accumulation of atoms in the dipole trap over the trap lifetime, determined by collisions with the background gas. This results in a significantly higher number of trapped atoms even at a lower steady-state peak density in the MOT.We load ${10}^{5}$ magnesium atoms in a dipole trap from a millikelvin-hot magneto-optical trap (MOT) using a continuous-loading scheme. Light-assisted two-body processes limit the maximum achievable density in a MOT, resulting in a reduced transfer efficiency into a dipole trap when using the conventional sequential scheme. It is overcome in a continuous-loading scheme where a loss channel is opened in the MOT. This allows the accumulation of atoms in the dipole trap over the trap lifetime, determined by collisions with the background gas. This results in a significantly higher number of trapped atoms even at a lower steady-state peak density in the MOT.

Physical Review AOct 10, 201238 citations

Loading a dipole trap from an atomic reservoir

Dimitris Sofikitis, Guillaume Stern, L. Kime +4 more

The European Physical Journal DJan 1, 201112 citations

Loading characteristics of a microscopic optical dipole trap

P. Kulatunga, Tyler Blum, D. Olek

We report on an investigation of loading characteristics of deep microscopic dipole traps. The dipole trap is loaded from a low density magneto optical trap (MOT) containing $\approx 5\times 10^{6}$ atoms. We determine the loading parameters that maximize the trapped atom number for a trap of waist 5 μm with trap depths ranging from 3.5 mK to 10 mK. We determine the optimal trap loading conditions and the loading rates, loss coefficients and temperature of the trapped atoms under these conditions. We show that it is possible to load a few hundred to thousand atoms in dipole traps of depth 3.5 mK to 8.5 mK under the optimal loading conditions.We report on an investigation of loading characteristics of deep microscopic dipole traps. The dipole trap is loaded from a low density magneto optical trap (MOT) containing $\approx 5\times 10^{6}$ atoms. We determine the loading parameters that maximize the trapped atom number for a trap of waist 5 μm with trap depths ranging from 3.5 mK to 10 mK. We determine the optimal trap loading conditions and the loading rates, loss coefficients and temperature of the trapped atoms under these conditions. We show that it is possible to load a few hundred to thousand atoms in dipole traps of depth 3.5 mK to 8.5 mK under the optimal loading conditions.

arXiv:1009.2544Sep 14, 20100 citations

We load

{10}^{5}

magnesium atoms in a dipole trap from a millikelvin-hot magneto-optical trap (MOT) using a continuous-loading scheme. Light-assisted two-body processes limit the maximum achievable density in a MOT, resulting in a reduced transfer efficiency into a dipole trap when using the conventional sequential scheme. It is overcome in a continuous-loading scheme where a loss channel is opened in the MOT. This allows the accumulation of atoms in the dipole trap over the trap lifetime, determined by collisions with the background gas. This results in a significantly higher number of trapped atoms even at a lower steady-state peak density in the MOT.

We report on an investigation of loading characteristics of deep microscopic dipole traps. The dipole trap is loaded from a low density magneto optical trap (MOT) containing

\approx 5\times 10^{6}

atoms. We determine the loading parameters that maximize the trapped atom number for a trap of waist 5 μm with trap depths ranging from 3.5 mK to 10 mK. We determine the optimal trap loading conditions and the loading rates, loss coefficients and temperature of the trapped atoms under these conditions. We show that it is possible to load a few hundred to thousand atoms in dipole traps of depth 3.5 mK to 8.5 mK under the optimal loading conditions.