Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Asia and South Pacific Design Automation Conference (ASP-DAC)

Design of multiple fanout clock distribution network for rapid single flux quantum technology

Naveen Kumar Katam, Alireza Shafaei, Massoud Pedram

Published Jan 1, 2017• 23 citations
Publisher

Abstract

Rapid Single Flux Quantum (RSFQ) logic cells have traditionally been limited to driving one fanout cell because of the difficulty in distributing the single flux quantum pulse to multiple fanouts. This paper presents a method to modify the standard RSFQ cells at their input/output interfaces to other cells in order to support a multiple-fanout drive capability. This capability is especially useful for clock distribution in RSFQ logic. This is because RSFQ logic is requires the clock signal to be provided to every logic gate. This is why this paper focuses on the clock signal driving more than one cell without the use of splitters. The potential tradeoff is in lower margins for the cells. However, by careful design of the RSFQ cells, the yield is not compromised by our proposed technique.

DOI
10.1109/aspdac.2017.7858353

Related papers

Splitter Trees in Single Flux Quantum Circuits

Tahereh Jabbari, Gleb Krylov, Jamil Kawa +1 more

The increasing complexity of modern rapid single flux quantum (RSFQ) circuits has made the issue of multiple fanout of growing importance. Most RSFQ gates can only drive a single output. Splitter gates can however distribute an SFQ pulse to multiple fanout. To drive N SFQ gates, N-1 splitters with a fanout of two are required. Large splitter trees are often used in high speed VLSI complexity SFQ systems. These splitters require significant area and increase the path delay. In this paper, three area and power efficient splitter topologies for large scale RSFQ circuits are introduced. These SFQ splitters are an active splitter tree with fewer JJs, a passive splitter, and a multi-output active splitter. A methodology is presented for determining when to use passive or active splitters. Tradeoffs among the number of JJs, bias current of each stage, and delay are reported along with a margin analysis. The proposed splitters greatly reduce the required bias currents and delay of large scale RSFQ circuits by enabling multiple fanout. The methodologies and techniques are applicable to automated layout and clock tree synthesis for large scale SFQ integrated circuits.

IEEE Transactions on Applied Superconductivity•Apr 5, 2021•49 citations

Asynchronous Dynamic Single-Flux Quantum Majority Gates

Gleb Krylov, Eby G. Friedman

Among the major issues in modern large-scale rapid single-flux quantum (RSFQ) circuits are the complexity of the clock network, tight timing tolerances, poor applicability of existing CMOS-based design algorithms, and extremely deep pipelines, which reduce the effective clock frequency. In this article, asynchronous dynamic single-flux quantum majority gates are proposed to solve some of these problems. The proposed logic gates exhibit high bias margins and do not require significant area or a large number of Josephson junctions as compared to existing RSFQ logic gates. These gates exhibit a tradeoff among the input skew tolerance, clock frequency, and bias margins. Asynchronous logic gates greatly reduce the complexity of the clock network in large-scale RSFQ circuits, thereby alleviating certain timing issues and reducing the required bias currents. Furthermore, asynchronous logic allows existing design algorithms to utilize CMOS approaches for synthesis, verification, and testability. The adoption of majority logic in complex RSFQ circuits also reduces the pipeline depth, enabling higher clock speeds in very large scale integration RSFQ circuits.

IEEE Transactions on Applied Superconductivity•Mar 4, 2020•39 citations

Optimised asynchronous self-timing for superconducting RSFQ logic circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested

IEEE AFRICON•Apr 6, 2005•2 citations

Simulation and optimization of binary full-adder cells in rapid single flux quantum logic

S.S. Martinet, Mark F. Bocko

The authors consider the design of a binary carry full-adder cell using the logic gates and buffers belonging to the rapid single-flux-quantum (RSFQ) logic family. They have taken advantage of the unique properties of RSFQ pulse logic to realize two designs: one using two logic gates and a toggle flip-flop in two stages of logic, the other using two logic gates in one stage of logic. They have determined the parameter margins of the two full-adder cells and optimized them to obtain critical margins approaching +or-30%. Simulations of the full-adder cells have revealed critical delays and maximum clock frequencies of 58 ps and 17 GHz and 33 ps and 30 GHz, respectively.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•6 citations

Single flux, quantum B flip-flop and its possible applications

Stanislav V. Polonsky, Vasili K. Semenov, Alex F. Kirichenko

We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1994•75 citations

Challenges and the status of superconducting single flux quantum technology

Naveen Kumar Katam, Jamil Kawa, Massoud Pedram

Design and manufacturing of superconductive electronics have been evolving over the past three decades with significant progress made in related fields. Rapid single flux quantum (RSFQ) logic circuits have become popular among superconductive logic families and its energy-efficient variants (ERSFQ and eSFQ) have shown promise as an ultra lowpower and high-speed circuit fabric. SFQ circuits have been demonstrated at tens of GHz with an energy consumption of an attojoule per gate. There are many differences between SFQ and conventional CMOS circuits. SFQ logic circuits are based on the manipulation of the quantized magnetic flux pulses. Most of the logic gates are sequential in nature requiring the clock to be distributed to every logic gate. SFQ logic gates have no gain and hence splitters are needed to drive multiple fanouts. Design and successful demonstration of a controllable superconducting switch and a compact reliable memory element have evaded researchers so far. This paper starts by describing key differences between SFQ logic and conventional CMOS and concludes by listing key challenges that must be overcome to achieve the very large scale integration of SFQ circuits and make the demonstration of a superconductive CPU a reality.

Design, Automation, and Test in Europe•Mar 1, 2019•11 citations
Rapid Single Flux Quantum (RSFQ) logic cells have traditionally been limited to driving one fanout cell because of the difficulty in distributing the single flux quantum pulse to multiple fanouts. This paper presents a method to modify the standard RSFQ cells at their input/output interfaces to other cells in order to support a multiple-fanout drive capability. This capability is especially useful for clock distribution in RSFQ logic. This is because RSFQ logic is requires the clock signal to be provided to every logic gate. This is why this paper focuses on the clock signal driving more than one cell without the use of splitters. The potential tradeoff is in lower margins for the cells. However, by careful design of the RSFQ cells, the yield is not compromised by our proposed technique.
The increasing complexity of modern rapid single flux quantum (RSFQ) circuits has made the issue of multiple fanout of growing importance. Most RSFQ gates can only drive a single output. Splitter gates can however distribute an SFQ pulse to multiple fanout. To drive N SFQ gates, N-1 splitters with a fanout of two are required. Large splitter trees are often used in high speed VLSI complexity SFQ systems. These splitters require significant area and increase the path delay. In this paper, three area and power efficient splitter topologies for large scale RSFQ circuits are introduced. These SFQ splitters are an active splitter tree with fewer JJs, a passive splitter, and a multi-output active splitter. A methodology is presented for determining when to use passive or active splitters. Tradeoffs among the number of JJs, bias current of each stage, and delay are reported along with a margin analysis. The proposed splitters greatly reduce the required bias currents and delay of large scale RSFQ circuits by enabling multiple fanout. The methodologies and techniques are applicable to automated layout and clock tree synthesis for large scale SFQ integrated circuits.
Among the major issues in modern large-scale rapid single-flux quantum (RSFQ) circuits are the complexity of the clock network, tight timing tolerances, poor applicability of existing CMOS-based design algorithms, and extremely deep pipelines, which reduce the effective clock frequency. In this article, asynchronous dynamic single-flux quantum majority gates are proposed to solve some of these problems. The proposed logic gates exhibit high bias margins and do not require significant area or a large number of Josephson junctions as compared to existing RSFQ logic gates. These gates exhibit a tradeoff among the input skew tolerance, clock frequency, and bias margins. Asynchronous logic gates greatly reduce the complexity of the clock network in large-scale RSFQ circuits, thereby alleviating certain timing issues and reducing the required bias currents. Furthermore, asynchronous logic allows existing design algorithms to utilize CMOS approaches for synthesis, verification, and testability. The adoption of majority logic in complex RSFQ circuits also reduces the pipeline depth, enabling higher clock speeds in very large scale integration RSFQ circuits.
Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested
The authors consider the design of a binary carry full-adder cell using the logic gates and buffers belonging to the rapid single-flux-quantum (RSFQ) logic family. They have taken advantage of the unique properties of RSFQ pulse logic to realize two designs: one using two logic gates and a toggle flip-flop in two stages of logic, the other using two logic gates in one stage of logic. They have determined the parameter margins of the two full-adder cells and optimized them to obtain critical margins approaching +or-30%. Simulations of the full-adder cells have revealed critical delays and maximum clock frequencies of 58 ps and 17 GHz and 33 ps and 30 GHz, respectively.>
We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>
Design and manufacturing of superconductive electronics have been evolving over the past three decades with significant progress made in related fields. Rapid single flux quantum (RSFQ) logic circuits have become popular among superconductive logic families and its energy-efficient variants (ERSFQ and eSFQ) have shown promise as an ultra lowpower and high-speed circuit fabric. SFQ circuits have been demonstrated at tens of GHz with an energy consumption of an attojoule per gate. There are many differences between SFQ and conventional CMOS circuits. SFQ logic circuits are based on the manipulation of the quantized magnetic flux pulses. Most of the logic gates are sequential in nature requiring the clock to be distributed to every logic gate. SFQ logic gates have no gain and hence splitters are needed to drive multiple fanouts. Design and successful demonstration of a controllable superconducting switch and a compact reliable memory element have evaded researchers so far. This paper starts by describing key differences between SFQ logic and conventional CMOS and concludes by listing key challenges that must be overcome to achieve the very large scale integration of SFQ circuits and make the demonstration of a superconductive CPU a reality.