Future progress and development in ultrasensitive detection and quantum-limited amplification of microwave signals in a wide frequency band is expected to be achieved by using new type architectures of parametric amplifiers based on chains of coupled Josephson junctions or superconducting quantum interference devices (SQUID). Over the past years the classical theory of the amplifiers in the framework of a nonlinear wave equation governing the node flux evolution along an array of coupled Josephson oscillators has been developed under continuum approximation. Although such amplifiers imply the quantum nature utilizing the Josephson effects there is no quantum approach to take into account quantum phenomena in Josephson traveling-wave parametric amplifiers (JTWPA). Here we formulate the Lagrangian approach to a one-dimensional chain of coupled Josephson junctions and take the first step to develop the quantum theory of JTWPAs by deriving an approximate quantum Hamiltonian of the chain.
Future progress and development in ultrasensitive detection and quantum-limited amplification of microwave signals in a wide frequency band is expected to be achieved by using new type architectures of parametric amplifiers based on chains of coupled Josephson junctions or superconducting quantum interference devices (SQUID). Over the past years the classical theory of the amplifiers in the framework of a nonlinear wave equation governing the node flux evolution along an array of coupled Josephson oscillators has been developed under continuum approximation. Although such amplifiers imply the quantum nature utilizing the Josephson effects there is no quantum approach to take into account quantum phenomena in Josephson traveling-wave parametric amplifiers (JTWPA). Here we formulate the Lagrangian approach to a one-dimensional chain of coupled Josephson junctions and take the first step to develop the quantum theory of JTWPAs by deriving an approximate quantum Hamiltonian of the chain.
Recent progress in physics has increased the necessity for ultra-low noise amplifiers capable of operating at the quantum limit performance. These amplifiers are essential to enhance astronomical detection, dark-matter search, and qubit readout in quantum computing, among other applications. Superconducting Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) operated in the microwave range, have demonstrated high gain over several gigahertz (GHz) bandwidth, with quantum-limited noise performance and minimal heat dissipation. These excellent properties make JTWPAs an ideal solution for ultra-low noise amplification. This thesis delves into the design, fabrication and characterisation of JTWPAs operated in the microwave (1-16 GHz) and the W-band (70-115GHz) regimes. A generalised coupled-mode equations (CME) framework describing JTWPAs based on Josephson junctions and DC superconducting quantum interference devices (SQUIDs) is introduced. This framework can be combined with electromagnetic (EM) simulation softwares to model the JTWPAs, facilitating their design. It is therefore used to model two microwave JTWPA designs, using parallel plate capacitors (PPCs) and interdigitated capacitors (IDCs). The fabrication and characterisation of both designs are presented, and possible fabrication and design issues are carefully discussed. Despite these issues, we observed broadband gain in the JTWPA with PPCs, achieving > 20 dB gain at several frequency points, and a measured P1dB = −95.8dBm when operated at 17.3 dB. The RF properties of a 500-junction Josephson array are also presented in this manuscript. The device creates a Fabry-Perot cavity, leading to non-travelling wave parametric effects, such as narrow-band gain. We also observed indications of efficient phase-sensitive amplification. The thesis is concluded with the first — to the best of our knowledge — experimental attempt to extend the operational frequency of a JTWPA to the W-band. The novel design, fabrication techniques and characterisation of the W-band JTWPA are discussed in detail in this manuscript, leading to promising results suggesting that JTWPA could operate at high frequencies.
In recent years Josephson-junction-based parametric amplifiers have been developed for single-photon-level signals in the microwave spectral region, where they found applications in quantum information processing. Typically, Josephson traveling wave parametric amplifiers (JTWPA) have been studied based on classical circuit models. Although this approach shows good agreement with experimental results, it describes the system behavior in the framework of a classical theory, neglecting the quantum nature of the device. A quantum mechanical treatment of the JTWPA was only given in a few recent papers, where [1] derives a Hamiltonian for a chain of unit cells without resonant phase-matching (RPM), and [2] solves the dynamics of the system with and without RPM, also partly considering noise and squeezed state generation. However, our approach differs from [2] in that we give an explicit solution to the resulting nonlinear wave equation for narrow-band signals, starting from discrete chain Hamiltonians with and without RPM. We focus on describing the dynamics of the device in a noiseless quantum setting and present solutions for the governing nonlinear wave equation in Fig. 1. The starting point of this work is the amplifier design as given in [3]. The mathematical description relies on the Hamiltonian of a discrete chain of unit cells, which was derived in [1], and which we extended by a RPM circuit [2]. As the size Δl of a single chain element is relatively small compared to the wavelength, the chain of discrete Josephson elements can be considered in terms of a continuous transmission line.
Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providing a relevant bandwidth. This research is centered on a comprehensive numerical investigation of the JTWPA, without resorting to simplifications regarding the nonlinearity of the essential components. Specifically, this study focuses on a thorough examination of the system, characterized by coupled nonlinear differential equations representing all components of the device. Proper input and output signals at the device's boundaries are considered. The analysis of the output signals undergoing the parametric amplification process involves a detailed exploration of phase-space dynamics and Fourier spectral analysis of the output voltage. This study is conducted while considering the parameters ruling the response of the device under pump and signal excitations. In addition to the expected signal amplification, the findings reveal that the nonlinear nature of the system can give rise to unforeseen phenomena, depending on the system's operational conditions, which include: the generation of pump tone harmonics, modulation of the signal gain, and incommensurate frequency generation—effects that are not easily accommodated by simplistic linearized approaches.
The issues of designing a Josephson traveling-wave parametric amplifier (JTWPA) based on a well-established technology of superconducting microcircuits with given and controlled parameters based on high-quality Nb-AlOx-Nb tunnel junctions are considered. This technology has been adapted and optimized to obtain structures with the required parameters and circuits with large number of tunnel junctions. To advance the technology, the basic elements of a promising JTWPA have been devel-oped, manufactured and studied. In direct current measurements, a number of super-conducting elements parameters were experimentally determined; these parameters are required for designing a JTWPA chips for microwave measurements. An original design of JTWPA based on a chain of SQUIDs in a coplanar line has been developed for implementation using the IRE niobium technology; the parameters of the main elements of the JTWPA have been determined. Keywords: Josephson travelling-wave parametric amplifiers (JTWPA), Josephson metamaterials (JMM), Josephson junctions (JJs), cold amplifier, coplanar lines, quantum noise, SIS, SQUIDs.
The recent developments in quantum technologies, as well as advanced detection experiments, have raised the need to detect extremely weak signals in the microwave frequency spectrum. To this aim, the Josephson travelling wave parametric amplifier, a device capable of reaching the quantum noise limit while providing a wide bandwidth, has been proposed as a suitable cryogenic front-end amplifier. This work deals with the numerical study of a Josephson travelling wave parametric amplifier, without approximations regarding the nonlinearity of the key elements. In particular, we focus on the investigation of the system of coupled nonlinear differential equations representing all the cells of the Josephson travelling wave parametric amplifier, with proper input and output signals at the boundaries. The investigation of the output signals generated by the parametric amplification process explores the phase-space and the Fourier spectral analysis of the output voltage, as a function of the parameters describing the pump and signal tones that excite the device. Beside the expected behavior, i.e., the signal amplification, we show that, depending on the system operation, unwanted effects (such as pump tone harmonics, incommensurate frequency generation, and noise rise), which are not accounted for in simple linearized approaches, can be generated in the whole nonlinear system.
Josephson traveling-wave parametric amplifiers (JTWPAs) are wideband, ultralow-noise amplifiers used to enable the readout of superconducting qubits. While individual JTWPAs have achieved high performance, behavior between devices is inconsistent due to wide manufacturing tolerances. Amplifier designs could be modified to improve resilience towards variations in amplifier components; however, existing device models often rely on analytical techniques that typically fail to incorporate component variations. To begin addressing this issue, a 1D numerical method for modeling JTWPAs is introduced in this work. The method treats the Josephson junctions and transmission lines in an amplifier as coupled subsystems and can easily incorporate arbitrary parameter variations. We discretize the transmission line subsystem with a finite element time domain method and the Josephson junction subsystem with a finite difference method, with leap-frog time marching used to evolve the system in time. We validate our method by comparing the computed gain to an analytical model for a traditional JTWPA architecture and one with resonant phase matching. We then use our method to demonstrate the impact of variations in Josephson junctions and phase-matching resonators on amplification. In future work, the method will be adjusted to incorporate additional amplifier architectures and extended to a 3D full-wave approach.