Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IET Communications

Improving physical layer security in untrusted relay networks: cooperative jamming and power allocation

Lu Lv, Jian Chen, Long Xiang Yang, Yonghong Kuo

Published Jul 20, 2016• 57 citations
Publisher

Abstract

The inherent broadcast characteristics of wireless medium make wireless data transmission difficult to be shielded from unintended recipients. As such, secure communication over wireless channels becomes a critical issue in the design of wireless networks. In this study, the authors study cooperative jamming and power optimisation in untrusted relay networks to improve physical layer security. By exploiting the direct link, a source‐based jamming (SBJ) scheme is proposed to hinder the untrusted relay from intercepting the confidential message. Considering the total power budget, a power allocation strategy is also proposed to optimally determine the power of source and untrusted relay as well as the power of information and jamming signals. Furthermore, to evaluate the secrecy performance of the proposed SBJ scheme with the power allocation strategy, tight lower bound of ergodic secrecy capacity and asymptotic secrecy outage probability are derived in closed form. Simulation verifies the advantages of the proposed SBJ scheme and the power allocation strategy.

DOI
10.1049/iet-com.2016.0355

Related papers

Joint optimal power allocation, cooperative beamforming, and jammer selection design to secure untrusted relaying network

Majid Moradikia, Saeed Mashdour, Ali Jamshidi

Abstract A half‐duplex relaying network provides 2 opportunities for passive eavesdroppers (Eves) and 1 opportunity for untrusted relays to intercept the information. In this paper, we aim to enhance the physical layer security of a cooperative network where a single‐antenna source intends to communicate with a single‐antenna destination in the presence of a group of untrusted relays and a passive eavesdropper. The objective is to protect the data confidentially while concurrently relying on the untrusted relays as potential Eves to improve both the security and reliability of the network. To realize this objective, we design a joint cooperative beamforming and cooperative jamming strategy. With the aim of maximizing the instantaneous secrecy rate, an optimal power allocation (OPA) scheme is proposed where the transmission powers of both jammer and source are optimized simultaneously under the total power budget constraint. To further improve the secrecy rate, a jammer selection strategy is also proposed where cooperative jamming is performed by the destination or one of the idle relays. For the proposed scheme, a closed‐form expression of beamformer vector is derived by solving a generalized eigenvalue problem. Finally, for the OPA problem, it is possible to be neither convex nor concave. In this regard, all possible cases are investigated to determine the OPA factor accurately. Numerical results illustrate that the proposed joint OPA–cooperative beamforming scheme, together with the most appropriate jammer selection strategy, significantly increases the secrecy rate.

Transactions on Emerging Telecommunications Technologies•Jan 18, 2018•12 citations

Improving Wireless Physical Layer Security via Cooperating Relays

Lun Dong, Zhu Han, Athina P. Petropulu +1 more

Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.

IEEE Transactions on Signal Processing•Dec 11, 2009•1,366 citations

Physical layer security in wireless-powered networks with untrusted relays

Ying Cai, Chao Zhang

In this paper, we study the secrecy performance of a wirelessly powered relay-aided system, where a pair of legal users (source-destination) communicate in the presence of multiple untrusted relays. All of the nodes mentioned above are energy constrained and powered by a dedicated power beacon (PB). To prevent the untrusted relays from intercepting the source message and to achieve positive secrecy rate, the destination-based cooperative jamming technique is employed. Besides, the optimal time allocation coefficient to maximize the secrecy throughput and the optimal transmit power of PB to maximize the secrecy energy efficiency are addressed. Specifically, three relay selection schemes with various requirements for channel state information (CSI), i.e., random relay selection, partial relay selection and optimal relay selection are also proposed to enhance the system security further. Finally, simulation results indicate the cooperative jamming technique indeed achieve positive secrecy rate and the proposed optimization strategies can improve the system performance.

IEEE International Conference on Communication Technology (ICCT)•Oct 1, 2017•2 citations

Joint Relay Selection and Power Allocation in Large-Scale MIMO Systems with Untrusted Relays and Passive Eavesdroppers

Ali Kuhestani, Abbas Mohammadi, Mohammadali Mohammadi

In this paper, a joint relay selection and power allocation (JRP) scheme is proposed to enhance the physical layer security of a cooperative network, where a multiple antennas source communicates with a single-antenna destination in the presence of untrusted relays and passive eavesdroppers (Eves). The objective is to protect the data confidentially while concurrently relying on the untrusted relays as potential Eves to improve both the security and reliability of the network. To realize this objective, we consider cooperative jamming performed by the destination while the JRP scheme is implemented. With the aim of maximizing the instantaneous secrecy rate, we derive a new closed-form solution for the optimal power allocation and propose a simple relay selection criterion under two scenarios of non-colluding Eves (NCE) and colluding Eves (CE). For the proposed scheme, a new closed-form expression is derived for the ergodic secrecy rate (ESR) and the secrecy outage probability as security metrics, and a new closed-form expression is presented for the average symbol error rate as a reliability measure over Rayleigh fading channels. We further explicitly characterize the high signal-to-noise ratio slope and power offset of the ESR to highlight the impacts of system parameters on the ESR. In addition, we examine the diversity order of the proposed scheme to reveal the achievable secrecy performance advantage. Finally, the secrecy and reliability diversity-multiplexing tradeoff of the optimized network are provided. Numerical results highlight that the ESR performance of the proposed JRP scheme for NCE and CE cases is increased with respect to the number of untrustworthy relays.

arXiv:1709.01341•IEEE Transactions on Information Forensics and Security•Jan 1, 2017•102 citations

Optimal Relay Selection for Physical Layer Security with Cooperative Jamming

Lijun Jia

This paper studies a scheme of optimal relay selection with cooperative jamming and optimal power allocation factor between forwarding relay and jammer.The traditional optimal relay selection scheme selects an optimal relay node to assist forward source information.Based on legitimate user and eavesdropper instantaneous channel state information, the proposed scheme selects two relay nodes to increase security against eavesdropper.The first relays to forward source information as traditional scheme.The second relays to send artificial noise as a friendly jammer.The relay operates in Decode-and-Forward strategy.The closed form expression of secrecy outage probability is derived.In addition, the optimal power allocation factor is given when the total relay transmit power is constrained.The simulation results verify that the proposed scheme can significantly improve system security performance compared with the traditional scheme.,

International Conference on Innovative Development of E-commerce and Logistics (ICIDEL)•Jan 1, 2018•0 citations

Optimal Power Allocation by Imperfect Hardware Analysis in Untrusted Relaying Networks

Ali Kuhestani, Abbas Mohammadi, Kai‐Kit Wong +3 more

By taking a variety of realistic hardware imperfections into consideration, we propose an optimal power allocation (OPA) strategy to maximize the instantaneous secrecy rate of a cooperative wireless network comprised of a source, a destination, and an untrusted amplify-and-forward relay. We assume that either the source or the destination is equipped with a large-scale multiple antennas' system, while the rest are equipped with a single antenna. To prevent the untrusted relay from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as destination-based cooperative jamming. Given this system model, novel closed-form expressions are presented in the high signal-to-noise ratio regime for the ergodic secrecy rate and the secrecy outage probability. We further improve the secrecy performance of the system by optimizing the associated hardware design. The results reveal that by beneficially distributing the tolerable hardware imperfections across the transmission and reception radio-frequency front ends of each node, the system's secrecy rate may be improved. The engineering insight is that equally sharing the total imperfections at the relay between the transmitter and the receiver provides the best secrecy performance. Numerical results illustrate that the proposed OPA together with the most appropriate hardware design significantly increases the secrecy rate.

arXiv:1709.01334•IEEE Transactions on Wireless Communications•Apr 10, 2018•43 citations
The inherent broadcast characteristics of wireless medium make wireless data transmission difficult to be shielded from unintended recipients. As such, secure communication over wireless channels becomes a critical issue in the design of wireless networks. In this study, the authors study cooperative jamming and power optimisation in untrusted relay networks to improve physical layer security. By exploiting the direct link, a source‐based jamming (SBJ) scheme is proposed to hinder the untrusted relay from intercepting the confidential message. Considering the total power budget, a power allocation strategy is also proposed to optimally determine the power of source and untrusted relay as well as the power of information and jamming signals. Furthermore, to evaluate the secrecy performance of the proposed SBJ scheme with the power allocation strategy, tight lower bound of ergodic secrecy capacity and asymptotic secrecy outage probability are derived in closed form. Simulation verifies the advantages of the proposed SBJ scheme and the power allocation strategy.
Abstract A half‐duplex relaying network provides 2 opportunities for passive eavesdroppers (Eves) and 1 opportunity for untrusted relays to intercept the information. In this paper, we aim to enhance the physical layer security of a cooperative network where a single‐antenna source intends to communicate with a single‐antenna destination in the presence of a group of untrusted relays and a passive eavesdropper. The objective is to protect the data confidentially while concurrently relying on the untrusted relays as potential Eves to improve both the security and reliability of the network. To realize this objective, we design a joint cooperative beamforming and cooperative jamming strategy. With the aim of maximizing the instantaneous secrecy rate, an optimal power allocation (OPA) scheme is proposed where the transmission powers of both jammer and source are optimized simultaneously under the total power budget constraint. To further improve the secrecy rate, a jammer selection strategy is also proposed where cooperative jamming is performed by the destination or one of the idle relays. For the proposed scheme, a closed‐form expression of beamformer vector is derived by solving a generalized eigenvalue problem. Finally, for the OPA problem, it is possible to be neither convex nor concave. In this regard, all possible cases are investigated to determine the OPA factor accurately. Numerical results illustrate that the proposed joint OPA–cooperative beamforming scheme, together with the most appropriate jammer selection strategy, significantly increases the secrecy rate.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.
In this paper, we study the secrecy performance of a wirelessly powered relay-aided system, where a pair of legal users (source-destination) communicate in the presence of multiple untrusted relays. All of the nodes mentioned above are energy constrained and powered by a dedicated power beacon (PB). To prevent the untrusted relays from intercepting the source message and to achieve positive secrecy rate, the destination-based cooperative jamming technique is employed. Besides, the optimal time allocation coefficient to maximize the secrecy throughput and the optimal transmit power of PB to maximize the secrecy energy efficiency are addressed. Specifically, three relay selection schemes with various requirements for channel state information (CSI), i.e., random relay selection, partial relay selection and optimal relay selection are also proposed to enhance the system security further. Finally, simulation results indicate the cooperative jamming technique indeed achieve positive secrecy rate and the proposed optimization strategies can improve the system performance.
In this paper, a joint relay selection and power allocation (JRP) scheme is proposed to enhance the physical layer security of a cooperative network, where a multiple antennas source communicates with a single-antenna destination in the presence of untrusted relays and passive eavesdroppers (Eves). The objective is to protect the data confidentially while concurrently relying on the untrusted relays as potential Eves to improve both the security and reliability of the network. To realize this objective, we consider cooperative jamming performed by the destination while the JRP scheme is implemented. With the aim of maximizing the instantaneous secrecy rate, we derive a new closed-form solution for the optimal power allocation and propose a simple relay selection criterion under two scenarios of non-colluding Eves (NCE) and colluding Eves (CE). For the proposed scheme, a new closed-form expression is derived for the ergodic secrecy rate (ESR) and the secrecy outage probability as security metrics, and a new closed-form expression is presented for the average symbol error rate as a reliability measure over Rayleigh fading channels. We further explicitly characterize the high signal-to-noise ratio slope and power offset of the ESR to highlight the impacts of system parameters on the ESR. In addition, we examine the diversity order of the proposed scheme to reveal the achievable secrecy performance advantage. Finally, the secrecy and reliability diversity-multiplexing tradeoff of the optimized network are provided. Numerical results highlight that the ESR performance of the proposed JRP scheme for NCE and CE cases is increased with respect to the number of untrustworthy relays.
This paper studies a scheme of optimal relay selection with cooperative jamming and optimal power allocation factor between forwarding relay and jammer.The traditional optimal relay selection scheme selects an optimal relay node to assist forward source information.Based on legitimate user and eavesdropper instantaneous channel state information, the proposed scheme selects two relay nodes to increase security against eavesdropper.The first relays to forward source information as traditional scheme.The second relays to send artificial noise as a friendly jammer.The relay operates in Decode-and-Forward strategy.The closed form expression of secrecy outage probability is derived.In addition, the optimal power allocation factor is given when the total relay transmit power is constrained.The simulation results verify that the proposed scheme can significantly improve system security performance compared with the traditional scheme.,
By taking a variety of realistic hardware imperfections into consideration, we propose an optimal power allocation (OPA) strategy to maximize the instantaneous secrecy rate of a cooperative wireless network comprised of a source, a destination, and an untrusted amplify-and-forward relay. We assume that either the source or the destination is equipped with a large-scale multiple antennas' system, while the rest are equipped with a single antenna. To prevent the untrusted relay from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as destination-based cooperative jamming. Given this system model, novel closed-form expressions are presented in the high signal-to-noise ratio regime for the ergodic secrecy rate and the secrecy outage probability. We further improve the secrecy performance of the system by optimizing the associated hardware design. The results reveal that by beneficially distributing the tolerable hardware imperfections across the transmission and reception radio-frequency front ends of each node, the system's secrecy rate may be improved. The engineering insight is that equally sharing the total imperfections at the relay between the transmitter and the receiver provides the best secrecy performance. Numerical results illustrate that the proposed OPA together with the most appropriate hardware design significantly increases the secrecy rate.