Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Design Of Dual Polarisation Sideband Separation Mixer For ALMA Band 5

Bhushan Billade

Published Sep 1, 2009• 1 citation
OpenAlex

Abstract

This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.

Related papers

Performance of the First ALMA Band 5 Production Cartridge

Bhushan Billade, Olle Nyström, Denis Meledin +9 more

We present performance of the first ALMA Band 5 production cartridge, covering frequencies from 163 to 211 GHz. Atacama Large Millimeter/sub-millimeter Array (ALMA) Band 5 is a dual polarization, sideband separation (2SB) receiver based on all Niobium (Nb) superconductor–insulator–superconductor (SIS) tunnel junction mixers, providing 16 GHz of instantaneous RF bandwidth for astronomy observations. The 2SB mixer for each polarization employs a quadrature configuration. The sideband separation occurs at the output of the IF hybrid that has integrated bias-T for biasing the mixers, and is produced using superconducting thin-film technology. Experimental verification of the Band 5 cold cartridge performed together with warm cartridge assembly, confirms that the system noise temperature is below 45 K over most of the RF band, which is less than 5 photon noise (5 hf/k). This is to our knowledge, the best results reported at these frequencies. The measurement of the sideband rejection indicates that the sideband rejection is better than 10 dB over 90% of the observational band.

IEEE Transactions on Terahertz Science and Technology•Feb 21, 2012•55 citations

An SIS-based sideband-separating heterodyne mixer optimized for the 600 to 720 GHz band

Fausto Patricio Mena, J. Kooi, Andrey M. Baryshev +4 more

The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.

Journal of Physics Conference Series•Feb 1, 2008•3 citations

A sensitive ALMA Band 10 SIS receiver engineering model

Yoshinori Uzawa, M. Kroug, Takafumi Kojima +7 more

We have developed a single polarization engineering model of the Atacama Large Millimeter/Submillimeter Array (ALMA) Band 10 (0.78–0.95 THz) receivers. The front-end optics comprises a pair of ellipsoidal mirrors and a corrugated feed horn. A waveguide mixer block is attached to the feed horn in which an NbTiN-based superconductor–insulator–superconductor (SIS) mixer chip, which uses a quartz substrate, is mounted onto a WR-1.2 full-height waveguide. The SIS mixer employs two Nb / AlO x / Nb junctions and an NbTiN/SiO 2 /Al microstrip tuning circuit. A very wide intermediate frequency (IF) system with a bandwidth of 4–12 GHz is employed. The receiver demonstrated double-sideband (DSB) noise temperatures of below 240 K at local oscillator (LO) frequencies ranging from 792 to 945 GHz, without any correction for loss in front of the receiver. The lowest DSB receiver noise temperature, 179 K, was obtained at the center frequency of the designed band, which corresponds to about 4 quanta. These results represent state-of-the-art sensitivity for a receiver at an operating physical temperature of 4 K.

Superconductor Science and Technology•Oct 19, 2009•22 citations

ALMA Band 5 (163-211 GHz) Sideband Separation Mixer Design

Bhushan Billade, Victor Y. Belitsky, Alexey Pavolotsky +4 more

We present the design of ALMA Band 5 sideband separation mixer based on Niobium superconducting SIS junctions and first experimental results for the double side band mixer. In this mixer the LO injection circuitry is integrated on the mixer substrate using a microstrip line directional coupler with slot-line branches in the ground plane. The isolated port of the LO coupler is terminated by a wideband floating elliptical termination. The mixer employs two SIS junctions with junction area of 3 ?m2 each, in twin junction configuration, followed by a quarter wave transformer to couple it to the RF probe. First measurements of the DSB mixer show promising results with noise temperature around 35K over the entire band.

Softwaretechnik-Trends•Apr 1, 2008•4 citations

A 385-500 GHz Low Noise Superconductor-Insulator- Superconductor Mixer for ALMA Band 8

Wenlei Shan

We report on the design and experimental results of a fix-tuned Superconductor-Insulator-Superconductor (SIS) mixer for Atacama Large Millimeter/submillimeter Array (ALMA) band 8 (385-500 GHz) receivers. Nb-based SIS junctions of a current density of 10 kA/cm(2) and one micrometer size (fabricated with a two-step lift-off process) are employed to accomplish the ALMA receiver specification, which requires wide frequency coverage as well as low noise temperature. A parallel-connected twin-junction (PCTJ) is designed to resonate at the band center to tune out the junction geometric capacitance. A waveguide-microstrip probe is optimized to have nearly frequency-independent impedance at the probe's feed point, thereby making it easy to match the low-impedance PCTJ over a wide frequency band. The RF embedding impedance is retrieved by fitting the measured pumped I-V curves to confirm good matching between PCTJ and signal source. We demonstrate here a minimum double-sideband receiver noise temperature of 3 times of quantum limits for an intermediate-frequency range of 4-8 GHz. The mixers were measured in band 8 cartridge with a sideband separation scheme. Single-sideband receiver noise below ALMA specification was achieved over the whole band.

IEICE Transactions on Electronics•Feb 1, 2006•11 citations

Development of the ALMA Band-3 and Band-6 Sideband-Separating SIS Mixers

Anthony R. Kerr, Shing-Kuo Pan, Stephane M. X. Claude +4 more

As the Atacama Large Millimeter/submillimeter Array (ALMA) nears completion, 73 dual-polarization receivers have been delivered for each of Bands 3 (84-116 GHz) and 6 (211-275 GHz). The receivers use sideband-separating superconducting Nb/Al-AlOx/Nb tunnel-junction (SIS) mixers, developed for ALMA to suppress atmospheric noise in the image band. The mixers were designed taking into account dynamic range, input return loss, and signal-to-image conversion (which can be significant in SIS mixers). Typical SSB receiver noise temperatures in Bands 3 and 6 are 30 and 60 K, respectively, and the image rejection is typically 15 dB.

IEEE Transactions on Terahertz Science and Technology•Feb 13, 2014•63 citations
This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.
We present performance of the first ALMA Band 5 production cartridge, covering frequencies from 163 to 211 GHz. Atacama Large Millimeter/sub-millimeter Array (ALMA) Band 5 is a dual polarization, sideband separation (2SB) receiver based on all Niobium (Nb) superconductor–insulator–superconductor (SIS) tunnel junction mixers, providing 16 GHz of instantaneous RF bandwidth for astronomy observations. The 2SB mixer for each polarization employs a quadrature configuration. The sideband separation occurs at the output of the IF hybrid that has integrated bias-T for biasing the mixers, and is produced using superconducting thin-film technology. Experimental verification of the Band 5 cold cartridge performed together with warm cartridge assembly, confirms that the system noise temperature is below 45 K over most of the RF band, which is less than 5 photon noise (5 hf/k). This is to our knowledge, the best results reported at these frequencies. The measurement of the sideband rejection indicates that the sideband rejection is better than 10 dB over 90% of the observational band.
The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.
We have developed a single polarization engineering model of the Atacama Large Millimeter/Submillimeter Array (ALMA) Band 10 (0.78–0.95 THz) receivers. The front-end optics comprises a pair of ellipsoidal mirrors and a corrugated feed horn. A waveguide mixer block is attached to the feed horn in which an NbTiN-based superconductor–insulator–superconductor (SIS) mixer chip, which uses a quartz substrate, is mounted onto a WR-1.2 full-height waveguide. The SIS mixer employs two Nb / AlO x / Nb junctions and an NbTiN/SiO 2 /Al microstrip tuning circuit. A very wide intermediate frequency (IF) system with a bandwidth of 4–12 GHz is employed. The receiver demonstrated double-sideband (DSB) noise temperatures of below 240 K at local oscillator (LO) frequencies ranging from 792 to 945 GHz, without any correction for loss in front of the receiver. The lowest DSB receiver noise temperature, 179 K, was obtained at the center frequency of the designed band, which corresponds to about 4 quanta. These results represent state-of-the-art sensitivity for a receiver at an operating physical temperature of 4 K.
We present the design of ALMA Band 5 sideband separation mixer based on Niobium superconducting SIS junctions and first experimental results for the double side band mixer. In this mixer the LO injection circuitry is integrated on the mixer substrate using a microstrip line directional coupler with slot-line branches in the ground plane. The isolated port of the LO coupler is terminated by a wideband floating elliptical termination. The mixer employs two SIS junctions with junction area of 3 ?m2 each, in twin junction configuration, followed by a quarter wave transformer to couple it to the RF probe. First measurements of the DSB mixer show promising results with noise temperature around 35K over the entire band.
We report on the design and experimental results of a fix-tuned Superconductor-Insulator-Superconductor (SIS) mixer for Atacama Large Millimeter/submillimeter Array (ALMA) band 8 (385-500 GHz) receivers. Nb-based SIS junctions of a current density of 10 kA/cm(2) and one micrometer size (fabricated with a two-step lift-off process) are employed to accomplish the ALMA receiver specification, which requires wide frequency coverage as well as low noise temperature. A parallel-connected twin-junction (PCTJ) is designed to resonate at the band center to tune out the junction geometric capacitance. A waveguide-microstrip probe is optimized to have nearly frequency-independent impedance at the probe's feed point, thereby making it easy to match the low-impedance PCTJ over a wide frequency band. The RF embedding impedance is retrieved by fitting the measured pumped I-V curves to confirm good matching between PCTJ and signal source. We demonstrate here a minimum double-sideband receiver noise temperature of 3 times of quantum limits for an intermediate-frequency range of 4-8 GHz. The mixers were measured in band 8 cartridge with a sideband separation scheme. Single-sideband receiver noise below ALMA specification was achieved over the whole band.
As the Atacama Large Millimeter/submillimeter Array (ALMA) nears completion, 73 dual-polarization receivers have been delivered for each of Bands 3 (84-116 GHz) and 6 (211-275 GHz). The receivers use sideband-separating superconducting Nb/Al-AlOx/Nb tunnel-junction (SIS) mixers, developed for ALMA to suppress atmospheric noise in the image band. The mixers were designed taking into account dynamic range, input return loss, and signal-to-image conversion (which can be significant in SIS mixers). Typical SSB receiver noise temperatures in Bands 3 and 6 are 30 and 60 K, respectively, and the image rejection is typically 15 dB.