IEEE Transactions on Applied Superconductivity

Design and Demonstration of Interface Circuits Between Rapid Single-Flux-Quantum and Adiabatic Quantum-Flux-Parametron Circuits

Fumihiro China, Tatsuya Narama, Naoki Takeuchi, Thomas Ortlepp, Yuki Yamanashi, Nobuyuki Yoshikawa

Published Jun 7, 2016• 18 citations

Abstract

We investigated interface circuits between rapid single-flux-quantum (RSFQ) circuits and adiabatic quantum-flux-parametron (AQFP) circuits for a high-speed and low-power hybrid computing system. In addition, the interface circuits allow us to use long-distance interconnections based on single-flux-quantum (SFQ) passive transmission lines between AQFP gates. The target frequency of interface circuits is several gigahertz. There are two types of interface circuits. The RSFQ/AQFP interface circuit, which transmits a signal from RSFQ circuits to AQFP gates, was realized by coupling an RSFQ toggle flip-flop (TFF) to an AQFP buffer gate. The simulated bias margins of the RSFQ TFF and the excitation current margin of the RSFQ/AQFP interface were 2.22 mA ± 24.7% and 1.71 mA ± 25.0%, respectively. The AQFP/RSFQ interface circuit, which transmits a signal from AQFP gates to RSFQ circuits, was designed by using a high-sensitive magnetically coupled dc/SFQ converter (MC-dc/SFQ) to detect an output current of an AQFP buffer gate. The simulated bias margins of the MC-dc/SFQ and the excitation current margin of the AQFP/RSFQ interface were 0.558 mA ± 20.5% and 1.95 mA ± 36.1%, respectively. We also fabricated and measured the interface circuits.

DOI: 10.1109/tasc.2016.2577603

Related papers

Study of Signal Interface between Single Flux Quantum Circuit and Adiabatic Quantum Flux Parametron

Fumihiro China, Tatsuya Narama, Naoki Takeuchi +3 more

We investigated interface circuits between a single-flux-quantum (SFQ) circuit and an adiabatic quantum-flux-parametron (AQFP) for their hybrid system. The target frequency of interface circuits is several GHz. The interface circuit that transmits a signal from the SFQ circuit to the AQFP gate (SFQ/AQFP) is realized by combining an SFQ toggle flip-flop (TFF) with the AQFP buffer. The bias margin of the SFQ TFF and the excitation current margin of the SFQ/AQFP interface are 2.47 mV ±24.7% and 1.36 mA ±8.82%, respectively. The interface circuit that transmits a signal from the AQFP to the SFQ circuit (AQFP/SFQ) was designed by using a high-sensitive mutually coupled dc/SFQ converter (MC-dc/SFQ) to detect magnetic flux signal output from the AQFP. The bias margin of the high-sensitive MC-dc/SFQ and the excitation current margin of the AQFP/SFQ are 2.88 mV ±13% and 1.6 mA ±18.8%, respectively. These interface circuits also allow us to use long-distance interconnection based on SFQ passive transmission lines between AQFP gates.

IEEE International Superconductive Electronics Conference (ISEC)Jul 1, 20150 citations

Demonstration of Signal Transmission between Adiabatic Quantum-Flux-Parametrons and Rapid Single-Flux-Quantum Circuits Using Superconductive Microstrip Lines

Fumihiro China, Naoki Tsuji, Tatsuya Narama +4 more

We have been investigating interface circuits between rapid single-flux-quantum circuits and adiabatic quantum-flux-parametron (AQFP) circuits for use in high-speed low-power hybrid computing system. These interface circuits also enable us to use long-distance interconnections between AQFP gates. In this study, we fabricated and demonstrated AQFP circuits, including long interconnections of passive transmission lines (PTLs), in which the interface circuits were used to convert the signal currents of the AQFP gates into single-flux-quantum pulses traveling along PTLs. The length of each PTL was approximately 4.3 mm. During low-speed measurements, correct operations with wide bias margins were confirmed.

IEEE Transactions on Applied SuperconductivityJan 1, 201616 citations

Demonstration of Interface Circuits for Adiabatic Quantum-Flux-Parametron Cell Library Using an Eight-Metal Layer Superconductor Process

Yuki Hironaka, Sukanya Sagarika Meher, Christopher Lawrence Ayala +7 more

In this paper, we designed and demonstrated interface circuits between AQFP (adiabatic quantum-flux-parametron) and RSFQ (rapid single-flux-quantum) circuits according to the established AQFP and RSFQ cell libraries using the MIT LL SFQ5ee process. The principles of these interfaces are based on ones that were previously designed and demonstrated using a four-metal-layer superconductor process. The AQFP-to-RSFQ interface is based on an RSFQ comparator, where an output current from an AQFP buffer is converted to an SFQ pulse output. The RSFQ-to-AQFP interface is based on an RSFQ D flip-flop, where the internal state of the D flip-flop is read out by an AQFP buffer. Thanks to the eight-metal-layer process, the interfaces can be designed with reduced circuit area compared to original designs with the four-metal-layer process. We designed, fabricated, and tested an AQFP-RSFQ hybrid multiplexer test circuit as an example of utilization of the interfaces, which results in correct operation with reasonably wide bias margins in low-frequency tests.

IEEE Transactions on Applied SuperconductivityFeb 16, 20234 citations

A Compact Interface Between Adiabatic Quantum-Flux-Parametron and Rapid Single-Flux-Quantum Circuits

Yuichi Yamazaki, Naoki Takeuchi, Nobuyuki Yoshikawa

Each superconductor logic family has distinct features and advantages. For instance, adiabatic quantum-flux-parametron (AQFP) circuits operate with very high energy efficiency, and rapid single-flux-quantum (RSFQ) circuits operate at very high clock frequencies. To build a hybrid system that combines the above advantages, we propose a compact interface between AQFP and RSFQ circuits that converts current signals in AQFP logic into flux signals in RSFQ logic using a non-adiabatic quantum-flux-parametron gate. Compared to a previously proposed AQFP/RSFQ interface, the proposed interface has far fewer Josephson junctions (4 vs. 11). We optimize the circuit parameters of the AQFP/RSFQ interface and demonstrate the interface at low speed as proof of concept. Furthermore, we demonstrate data propagation between AQFP circuits along a long passive transmission line via the AQFP/RSFQ interface at low speed to show that the AQFP/RSFQ interface can alleviate the interconnect length limit in AQFP circuits.

IEEE Transactions on Applied SuperconductivityApr 8, 202114 citations

Self-Resetting Interface Between Rapid Single-Flux-Quantum and Adiabatic Quantum-Flux-Parametron Circuits

Mikiya Naruse, Nobuyuki Yoshikawa, Naoki Takeuchi

Various superconductor logic families have been proposed to build energy-efficient digital systems. Each logic family has its respective advantages and disadvantages, so in some systems, it is crucial to combine different superconductor logic families. We previously developed adiabatic quantum-flux-parametron (AQFP)/rapid single-flux-quantum (RSFQ) hybrid systems, such as a readout circuit for superconducting photon detectors and a flux-bias circuit for superconducting quantum bits. To facilitate the design of AQFP/RSFQ hybrid systems, here we propose a self-resetting RSFQ-to-AQFP (SR-R2A) interface as a compact signal converter from RSFQ logic into AQFP logic. The SR-R2A interface comprises an RSFQ latch and an AQFP comparator, where the AQFP comparator detects the flux state of the RSFQ latch. A previously proposed RSFQ-to-AQFP (R2A) interface requires single-flux-quantum clock signals to reset the flux state of the RSFQ part in the R2A interface, whereas the SR-R2A interface does not require such signals because the excitation current for the AQFP part also resets the flux state of the RSFQ latch. This feature allows the SR-R2A to be incorporated into AQFP/RSFQ hybrid systems without hardware overhead. We demonstrate an SR-R2A interface chip, fabricated with the AIST 10-kA/cm2Nb high-speed standard process, at 4.2 K in liquid helium. The experimental results indicate reasonably wide operating margins for the excitation currents and bias voltage for the SR-R2A interface.

IEEE Transactions on Applied SuperconductivityJul 26, 20230 citations

Low-Latency Adiabatic Quantum-Flux-Parametron Circuit Integrated With a Hybrid Serializer/Deserializer

Yuki Hironaka, Taiki Yamae, Christopher Lawrence Ayala +2 more

Adiabatic quantum-flux-parametron (AQFP) logic is an ultra-low-power superconductor logic family. AQFP logic gates are powered and clocked by dedicated clocking schemes using ac excitation currents to implement an energy-efficient switching process, adiabatic switching. We have proposed a low-latency clocking scheme, delay-line clocking, and demonstrated basic AQFP logic gates. In order to test more complex circuits, a serializer/deserializer (SerDes) should be incorporated into the AQFP circuit under test, since the number of input/output (I/O) cables is limited by equipment. Therefore, in the present study we propose and develop a novel SerDes for testing delay-line-clocked AQFP circuits by combining AQFP and rapid single-flux-quantum (RSFQ) logic families, which we refer to as the AQFP/RSFQ hybrid SerDes. The hybrid SerDes comprises RSFQ shift registers to facilitate the data storage during serial-to-parallel and parallel-to-serial conversion. Furthermore, all the component circuits in the hybrid SerDes are clocked by the identical excitation current to synchronize the AQFP and RSFQ parts. We fabricate and demonstrate a delay-line-clocked AQFP circuit (8-to-3 encoder, which is the largest delay-line-clocked circuit ever designed) integrated with the hybrid SerDes at 4.2 K up to 4.5 GHz. Our measurement results indicate that the hybrid SerDes enables the testing of delay-line-clocked AQFP circuits with only a few I/O cables and is thus a powerful tool for the development of very large-scale integration AQFP circuits.

arXiv:2210.03446IEEE AccessJan 1, 20223 citations