An organic system, TZT/AC/PMMA, for photon-gated hole burning is reported. The hole stability and multiple hole burning are studied. Laser induced hole-filling effect a examined. It is found that the gating light is responsible for this effect.
Persistent spectral hole-burning is reported for the organic guest molecule 5, 10, 15, 20-tetra-(p-methoxyphenyl) porphin (TMP) imbeded in polymethylmethacrylate (PMMA) host at liquid helium temperature. The effects for power saturation of hole depth and power broadening of hole width were observed. Hole growth dynamics was investigated and the process of light induced hole erasing was measured. Theoretical fits to the experimental data were carried out and hole burning mechanism of the system was discussed.
In photon-gated spectral hole burning, a hole is formed via a higher excited state produced by simultaneous laser irradiation at two different wavelengths1). One is the wavelength-selective light which promotes the ground state molecules to the first excited state, and the other is the gating light which promotes the excited molecules to the higher excited reaction sate. Only the wavelength-selective light is required to read out spectral holes and the recorded holes are not destroyed. Moreover, the gating light pumps the molecules up to the reaction state effectively, which may break through the bottleneck effect and enhance the recording sensitivity.
Persistent spectral hole-burning (PHB) has been proposed as the essential element of a frequency domain optical storage system1 in which the frequency at which a hole is burned in an inhomogeneously broadened absorption line at low temperatures serves as an additional dimension for the storage of digital information. Essentially all of the mechanisms studied until recently have been single-photon mechanisms, i.e., the photoionduced change leading to hole-burning (writing) for a given center occurs with a certain fixed probability after the absorption of one photon. Such linear, monophotonic processes suffer from the drawback that the act of detecting holes (reading) can also produce changes in the absorption line. Recent modeling studies of the generalized single-photon process2 have shown that thousands to tens of thousands of reads can be obtained from single-photon mechanisms only when the material possesses high quantum efficiency and low absorption cross section. These restrictive requirements do not apply for photon-gated hole-burning mechanisms, i.e., those mechanisms for which hole-burning occurs only in the presence of an additional “gating” light source, because for these mechanisms, reading is performed in the absence of the gating light and is therefore nondestructive.