Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

SUPERCONDUCTING DIGITAL MULTIPLEXERS FOR SENSOR ARRAYS

Alan M. Kadin, DARREN K. BROCK, Deepnarayan Gupta

Published Oct 2, 2016• 1 citation
OpenAlex

Abstract

Arrays of cryogenic microbolometers and other cryogenic detectors are being developed for infrared imaging. If the signal from each sensor is amplified, multiplexed, and digitized using superconducting electronics, then this data can be efficiently read out to ambient temperature with a minimum of noise and thermal load. HYPRES is developing an integrated system based on SQUID amplifiers, a high-resolution analog-to-digital converter (ADC) based on RSFQ (rapid single flux quantum) logic, and a clocked RSFQ multiplexer. The ADC and SQUIDs have already been demonstrated for other projects, so this paper will focus on new results of a digital multiplexer. Several test circuits have been fabricated using Nb Josephson technology and are about to be tested at T = 4.2 K, with a more complete prototype in preparation.

Related papers

Superconductor analog-to-digital converters

Oleg A. Mukhanov, Deepnarayan Gupta, Alan M. Kadin +1 more

Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.

Proceedings of the IEEE•Sep 20, 2004•185 citations

Integration of cryocooled superconducting analog-to-digital converter and SiGe output amplifier

Deepnarayan Gupta, Alan M. Kadin, R.J. Webber +8 more

HYPRES is developing a prototype digital system comprising a Nb RSFQ analog-to-digital converter (ADC) and SiGe amplifiers on a commercial two-stage cryocooler. This involves the detailed thermal, electrical, and mechanical design of the ADC chip mount, input/output (I/O) cables, and electromagnetic shielding. Our objective is to minimize the heat load on the second (4 K) stage of the cryocooler, in order to ensure stable ADC operation. The design incorporates thermal radiation shields and magnetic shielding for the RSFQ circuit. For the I/O cables, the thermal design must be balanced against the acceptable attenuation of RF lines and resistance of DC bias lines. SiGe heterojunction bipolar transistor (HBT) signal conditioning circuits, placed on the first (60 K) stage of the cryocooler, will amplify the mV-level ADC outputs to V-level (e.g., ECL) outputs for seamless transition to room-temperature electronics. Cooling these HBT circuits lowers noise and improves their high-frequency performance. Demonstration of this prototype should lead the way to commercialization of high-speed digital superconducting systems, for such applications as wireless communication, radars, and switching networks.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•25 citations

SiGe Integrated Circuit∕SQUID Hybrid Cryogenic Multiplexer for Superconducting Bolometer Array

D. Prêle, Fabrice Voisin, R. Oger +6 more

The development of large superconducting bolometer (Transition Edge Sensor: TES) arrays requires ultra low noise amplification and multiplexing electronics. The use of a first transducer stage such as a SQUID (Superconducting QUantum Interference Device) allows ultimate performance in terms of noise. However, the linearization of the SQUID characteristic requires low noise amplification. Furthermore, to realize a time domain multiplexer with SQUIDs, switched biasing is also needed. We have designed an Integrated Circuit (IC) in standard BiCMOS SiGe technology for the readout and the control of a SQUID multiplexer. It includes a low noise amplifier with multiplexed inputs, switched current sources for SQUIDs, and digital circuit for the addressing with only one room temperature clock signal. We have successfully tested this integrated circuit down to 2 K. To validate the operation of a SQUID multiplexer controlled by this SiGe cryogenic IC, we have developed a 2×2 SQUID hybrid demonstrator. It consists of four commercial SQUIDs connected to a SiGe IC.

AIP conference proceedings•Jan 1, 2009•2 citations

Prototype system for superconducting quantum interference device multiplexing of large-format transition-edge sensor arrays

C. D. Reintsema, J. Beyer, Sae Woo Nam +7 more

We discuss the implementation of a time-division superconducting quantum interference device (SQUID) multiplexing system for the instrumentation of large-format transition-edge sensor arrays. We cover the design and integration of cryogenic SQUID multiplexers and amplifiers, signal management and wiring, analog interface electronics, a digital feedback system, serial-data streaming and management, and system configuration and control. We present data verifying performance of the digital-feedback system. System noise and bandwidth measurements demonstrate the feasibility of adapting this technology for a broad base of applications, including x-ray materials analysis and imaging arrays for future astronomy missions such as Constellation-X (x-ray) and the SCUBA-2 instrument (submillimeter) for the James Clerk Maxwell Telescope.

Review of Scientific Instruments•Sep 25, 2003•100 citations

Theoretical and Experimental Analysis of Resistor Network for Use in Superconducting Analog-to-Digital Applications

Delaramsadat Ghadri

Superconducting micro-electronics (SME) technology is capable of realizing extremely high speed digital receivers performing direct digitization of microwave signals with very low power consumption. SME technology uses integrated circuits based on Josephson junctions and rapid single-flux quantum (RSFQ) logic operating at 4°K. The analogue-to-digital converter (ADC) is a basic building block of such receivers. Quantization and sampling are two fundamental parts of ADCs. Flash ADCs are the fastest converters and consist of comparators and a resistor network. \nThis thesis investigates the use of a multi-layer niobium-based low-temperature superconducting process to implement a resistor network. Several configurations for resistors are investigated both electrically and thermally. The resistors are designed to maintain their values from DC to 50GHz. Floating metal structures are added and optimized to minimize the inductance of the structure in order to obtain frequency-independent resistors over a frequency range of 50GHz. Several resistors and R-2R ladder networks are fabricated in the same process and measured in an RF cryogenic probe station at the Centre for Integrated RF Engineering (CIRFE) Lab at the University of Waterloo. Theoretical thermal analysis, is also carried out for these resistors to investigate temperature variations through the structures when operating at different power levels. The investigation is important for making sure that the resistors’ dissipated heat does not raise the local temperature above the transition temperature of niobium.

•Jan 23, 2019•1 citation

Superconductor Digital-RF Receiver Systems

Oleg A. Mukhanov, Dmitri E. Kirichenko, I. V. Vernik +12 more

Digital superconductor electronics has been experiencing rapid maturation with the emergence of smaller-scale, lower-cost communications applications which became the major technology drivers. These applications are primarily in the area of wireless communications, radar, and surveillance as well as in imaging and sensor systems. In these areas, the fundamental advantages of superconductivity translate into system benefits through novel Digital-RF architectures with direct digitization of wide band, high frequency radio frequency (RF) signals. At the same time the availability of relatively small 4K cryocoolers has lowered the foremost market barrier for cryogenically-cooled digital electronic systems. Recently, we have achieved a major breakthrough in the development, demonstration, and successful delivery of the cryocooled superconductor digital-RF receivers directly digitizing signals in a broad range from kilohertz to gigahertz. These essentially hybrid-technology systems combine a variety of superconductor and semiconductor technologies packaged with two-stage commercial cryocoolers: cryogenic Nb mixed-signal and digital circuits based on Rapid Single Flux Quantum (RSFQ) technology, room-temperature amplifiers, FPGA processing and control circuitry. The demonstrated cryocooled digital-RF systems are the world's first and fastest directly digitizing receivers operating with live satellite signals in X-band and performing signal acquisition in HF to L-band at ∼30GHz clock frequencies.

IEICE Transactions on Electronics•Mar 1, 2008•130 citations
Arrays of cryogenic microbolometers and other cryogenic detectors are being developed for infrared imaging. If the signal from each sensor is amplified, multiplexed, and digitized using superconducting electronics, then this data can be efficiently read out to ambient temperature with a minimum of noise and thermal load. HYPRES is developing an integrated system based on SQUID amplifiers, a high-resolution analog-to-digital converter (ADC) based on RSFQ (rapid single flux quantum) logic, and a clocked RSFQ multiplexer. The ADC and SQUIDs have already been demonstrated for other projects, so this paper will focus on new results of a digital multiplexer. Several test circuits have been fabricated using Nb Josephson technology and are about to be tested at T = 4.2 K, with a more complete prototype in preparation.
Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.
HYPRES is developing a prototype digital system comprising a Nb RSFQ analog-to-digital converter (ADC) and SiGe amplifiers on a commercial two-stage cryocooler. This involves the detailed thermal, electrical, and mechanical design of the ADC chip mount, input/output (I/O) cables, and electromagnetic shielding. Our objective is to minimize the heat load on the second (4 K) stage of the cryocooler, in order to ensure stable ADC operation. The design incorporates thermal radiation shields and magnetic shielding for the RSFQ circuit. For the I/O cables, the thermal design must be balanced against the acceptable attenuation of RF lines and resistance of DC bias lines. SiGe heterojunction bipolar transistor (HBT) signal conditioning circuits, placed on the first (60 K) stage of the cryocooler, will amplify the mV-level ADC outputs to V-level (e.g., ECL) outputs for seamless transition to room-temperature electronics. Cooling these HBT circuits lowers noise and improves their high-frequency performance. Demonstration of this prototype should lead the way to commercialization of high-speed digital superconducting systems, for such applications as wireless communication, radars, and switching networks.
The development of large superconducting bolometer (Transition Edge Sensor: TES) arrays requires ultra low noise amplification and multiplexing electronics. The use of a first transducer stage such as a SQUID (Superconducting QUantum Interference Device) allows ultimate performance in terms of noise. However, the linearization of the SQUID characteristic requires low noise amplification. Furthermore, to realize a time domain multiplexer with SQUIDs, switched biasing is also needed. We have designed an Integrated Circuit (IC) in standard BiCMOS SiGe technology for the readout and the control of a SQUID multiplexer. It includes a low noise amplifier with multiplexed inputs, switched current sources for SQUIDs, and digital circuit for the addressing with only one room temperature clock signal. We have successfully tested this integrated circuit down to 2 K. To validate the operation of a SQUID multiplexer controlled by this SiGe cryogenic IC, we have developed a 2×2 SQUID hybrid demonstrator. It consists of four commercial SQUIDs connected to a SiGe IC.
We discuss the implementation of a time-division superconducting quantum interference device (SQUID) multiplexing system for the instrumentation of large-format transition-edge sensor arrays. We cover the design and integration of cryogenic SQUID multiplexers and amplifiers, signal management and wiring, analog interface electronics, a digital feedback system, serial-data streaming and management, and system configuration and control. We present data verifying performance of the digital-feedback system. System noise and bandwidth measurements demonstrate the feasibility of adapting this technology for a broad base of applications, including x-ray materials analysis and imaging arrays for future astronomy missions such as Constellation-X (x-ray) and the SCUBA-2 instrument (submillimeter) for the James Clerk Maxwell Telescope.
Superconducting micro-electronics (SME) technology is capable of realizing extremely high speed digital receivers performing direct digitization of microwave signals with very low power consumption. SME technology uses integrated circuits based on Josephson junctions and rapid single-flux quantum (RSFQ) logic operating at 4°K. The analogue-to-digital converter (ADC) is a basic building block of such receivers. Quantization and sampling are two fundamental parts of ADCs. Flash ADCs are the fastest converters and consist of comparators and a resistor network. \nThis thesis investigates the use of a multi-layer niobium-based low-temperature superconducting process to implement a resistor network. Several configurations for resistors are investigated both electrically and thermally. The resistors are designed to maintain their values from DC to 50GHz. Floating metal structures are added and optimized to minimize the inductance of the structure in order to obtain frequency-independent resistors over a frequency range of 50GHz. Several resistors and R-2R ladder networks are fabricated in the same process and measured in an RF cryogenic probe station at the Centre for Integrated RF Engineering (CIRFE) Lab at the University of Waterloo. Theoretical thermal analysis, is also carried out for these resistors to investigate temperature variations through the structures when operating at different power levels. The investigation is important for making sure that the resistors’ dissipated heat does not raise the local temperature above the transition temperature of niobium.
Digital superconductor electronics has been experiencing rapid maturation with the emergence of smaller-scale, lower-cost communications applications which became the major technology drivers. These applications are primarily in the area of wireless communications, radar, and surveillance as well as in imaging and sensor systems. In these areas, the fundamental advantages of superconductivity translate into system benefits through novel Digital-RF architectures with direct digitization of wide band, high frequency radio frequency (RF) signals. At the same time the availability of relatively small 4K cryocoolers has lowered the foremost market barrier for cryogenically-cooled digital electronic systems. Recently, we have achieved a major breakthrough in the development, demonstration, and successful delivery of the cryocooled superconductor digital-RF receivers directly digitizing signals in a broad range from kilohertz to gigahertz. These essentially hybrid-technology systems combine a variety of superconductor and semiconductor technologies packaged with two-stage commercial cryocoolers: cryogenic Nb mixed-signal and digital circuits based on Rapid Single Flux Quantum (RSFQ) technology, room-temperature amplifiers, FPGA processing and control circuitry. The demonstrated cryocooled digital-RF systems are the world's first and fastest directly digitizing receivers operating with live satellite signals in X-band and performing signal acquisition in HF to L-band at ∼30GHz clock frequencies.