Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser & Infrared

Theoretical and experimental study of diode pumped Rb vapor laser

Li Li

Published Jan 1, 2013• 0 citations
OpenAlex

Abstract

The characteristics of an end-pumped single-pass Rb vapor laser is investigated by using three-level rate equations and correlated experiments. According to the theoretical model,the optimal ranges of pump linewidth,output coupler and Rb cell temperature are calculated. And the relationship between the output power and pump power is also studied. The calculated result corresponds with the experimental result very well,and the model's applicability is verified.

Related papers

Theoretical Modeling and Analysis of Blue Laser Characteristics of Continuous-Wave Single-Wavelength Two-Photon Pumped Rb-Vapor Laser

Yanhui Ji, Yang He, Haohua Wan +2 more

Based on an analysis of kinetic processes in the continuous-wave (CW) single-wavelength two-photon pumped Rb-vapor laser (Rb-TPAL), a three-dimensional computational model is established using the rate equation. Based on the application of the model to cavity-enhanced Rb-TPAL [Yuanet al.,Optics Express29, 4858 (2021)], the calculated and measured dependences of the laser power on the pump power show good agreement. We simulate the Rb-TPAL pumped by a high-power CW laser diode and analyze the effects of temperature, vapor cell length, pump waist, vapor cell transmission, and output mirror reflectance on the characteristics of the blue laser. The results suggest that the output power and efficiency of blue laser can be improved by optimizing the above parameters; however, the particles in the$5^{2}\text{D}_{5/2}$level face difficulty to transition to the$6^{2}\text{P}_{3/2}$level, and this limits the further improvement of blue laser efficiency; therefore, an approach is proposed to improve the efficiency of Rb-TPAL. This study can be useful for designing a two-photon pumped alkali metal laser with high-power output.

IEEE Journal of Quantum Electronics•Dec 15, 2021•8 citations

Evaluation of population densities of a rubidium laser pumped with a narrow-linewidth Ti:Sapphire laser

Shunyan Wang, You Wang, Juhong Han +8 more

In the recent years, alkali vapor lasers have become the most promising candidates for realization of a light source with both good beam quality and high output power because of their excellent performances. A rubidium laser is a typical kind of alkali vapor lasers. In this study, we developed a theoretical mode to evaluate the population densities of three levels as well as mode-matching efficiency of a rubidium laser pumped by a narrow-linewidth Ti:Sapphire laser under two different focal conditions. In the evaluation, at least two values of the output power of a rubidium laser must be known, which are usually obtained from the experiment. We performed a series of experiments by using two pump lenses with two focal lengths of 150 and 200 mm, and acquired two corresponding values of the laser output power. Then, we applied the experimental results in the theoretical calculation and then obtained the population densities of three levels and mode-matching efficiency of the rubidium laser. The study demonstrates that the outputted pump power can be used for evaluation of the population densities of three levels and mode-matching efficiency of an alkali laser under the different experimental conditions. The study might be valuable to better understand the physical features of an alkali vapor laser and to optimize the configuration of a high-powered alkali laser in the future.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 19, 2016•0 citations

Kinetic and fluid dynamic modeling, numerical approaches of flowing-gas diode-pumped alkali vapor amplifiers

Binglin Shen, Bailiang Pan, Jian Jiao +1 more

Comprehensive analysis of kinetic and fluid dynamic processes in flowing-gas diode-pumped alkali vapor amplifiers is reported. Taking into account effects of the temperature, the amplified spontaneous emission, the saturation power, the excitation of the alkali atoms to high electronic levels and the ionization, a detailed physical model is established to simulate the output performance of flowing-gas diode-pumped alkali vapor amplifiers. Influences of the flow velocity and the pump power on the amplified power are calculated and analyzed. Comparisons between single and double amplifier, longitudinal and transverse flow are made. Results show that end-pumped cascaded amplifier can provide higher output power under the same total pump power and the cell length, while output powers achieved by single- and double-end pumped, double-side pumped amplifiers with longitudinal or transverse flow have a complicated but valuable relation. Thus the model is extremely helpful for designing high-power flowing-gas diode-pumped alkali vapor amplifiers.

Optics Express•Jul 17, 2015•23 citations

Theoretical Analysis of the Power and Linewidth of the Diode-Laser-Pumped Rb87 Maser

Jinquan Deng, Xiwen Zhu

We calculated the oscillation power and total linewidth of the diode-laser-pumped Rb87 maser with spatial variations of the pumping rate and the radiative microwave field in the resonance cell. It is found that the maximum oscillation power P max corresponding to the optimum pumping rate Γ opt does not increase monotonically with the atomic density n 0 and that the short-term frequency stability of the maser corresponding to P max is about a factor of three better than that currently obtained with a lamp-pumped Rb87 maser. Some results are in fair agreement with our previous experiments. We also examined the variation of the oscillation powers vs light intensity in an average mode for three laser-pumping schemes with different frequencies and polarizations of the diode lasers.

Japanese Journal of Applied Physics•Mar 1, 1994•3 citations

Experimental investigation of a pulsed Rb–Ar excimer-pumped alkali laser

Hongling Cheng, Zhimin Wang, Fengfeng Zhang +5 more

Abstract We present experimental results of an exciplex-pumped alkali laser (XPAL) at 780 nm based on the 5 2 P 3/2 → 5 2 S 1/2 transition of the Rb atom in mixtures of Rb vapor and Ar. A laboratory-built Ti:sapphire laser with a pulse repetition rate of 3 kHz and a pulse width of 100 ns is used as the pump source. The maximum laser pulse energy of 0.26 µJ at 780 nm is obtained under an absorbed pump pulse energy of 42 µJ at 755 nm in mixtures of Rb vapor and Ar at a temperature of 423 K, corresponding to an optical conversion efficiency of 0.62%. Further experiments show that the output laser at 780 nm can always be detected for pump wavelengths ranging from 754 to 759 nm, indicating that Rb–Ar mixtures can be effectively pumped by commercial laser diodes (LDs) with a bandwidth of 5 nm.

Japanese Journal of Applied Physics•Feb 3, 2017•4 citations

Optically end-pumped scheme in rubidium vapor: Theory and experiment

Chenxu Liu, Yalong Hai, Anhong Dang

The optimal detuning of the pump light at the rubidium D2 line is calculated and experimentally validated. A three-level optically end-pumped model in a hot rubidium vapor cell is demonstrated, which takes into account the hyperfine structure of the ground state, various collisional processes, and the nonlinear absorption of the pump light along the cell length. By developing a constrained optimization model, we calculate the optimal detuning of the pump light that maximizes the average excited state atom concentration in the cell. Experimentally, a 1529 nm probe light at higher levels, which is attenuated to the weak-probe limit, is introduced to accurately characterize the excited state atom concentration. Coupling with the experimental results, the variation of the pump light optimal detuning with the temperature and the pump light intensity at the unsaturated pumping is analyzed. At the optimal detuning point, the theoretical decay function of the pump light percentage along the vapor cell length almost coincides regardless of the temperature and the pump light intensity changes. Moreover, the theoretical fitted pump light decay function at optimal detuning is predicted. The fitted pump light percentage exiting the vapor cell is 4.75%. A fast implementation method to achieve the maximal average excited state atom concentration in the experiment is demonstrated.

Applied Physics Letters•Sep 5, 2022•2 citations
The characteristics of an end-pumped single-pass Rb vapor laser is investigated by using three-level rate equations and correlated experiments. According to the theoretical model,the optimal ranges of pump linewidth,output coupler and Rb cell temperature are calculated. And the relationship between the output power and pump power is also studied. The calculated result corresponds with the experimental result very well,and the model's applicability is verified.
Based on an analysis of kinetic processes in the continuous-wave (CW) single-wavelength two-photon pumped Rb-vapor laser (Rb-TPAL), a three-dimensional computational model is established using the rate equation. Based on the application of the model to cavity-enhanced Rb-TPAL [Yuanet al.,Optics Express29, 4858 (2021)], the calculated and measured dependences of the laser power on the pump power show good agreement. We simulate the Rb-TPAL pumped by a high-power CW laser diode and analyze the effects of temperature, vapor cell length, pump waist, vapor cell transmission, and output mirror reflectance on the characteristics of the blue laser. The results suggest that the output power and efficiency of blue laser can be improved by optimizing the above parameters; however, the particles in the52D5/25^{2}\text{D}_{5/2}52D5/2​level face difficulty to transition to the62P3/26^{2}\text{P}_{3/2}62P3/2​level, and this limits the further improvement of blue laser efficiency; therefore, an approach is proposed to improve the efficiency of Rb-TPAL. This study can be useful for designing a two-photon pumped alkali metal laser with high-power output.
In the recent years, alkali vapor lasers have become the most promising candidates for realization of a light source with both good beam quality and high output power because of their excellent performances. A rubidium laser is a typical kind of alkali vapor lasers. In this study, we developed a theoretical mode to evaluate the population densities of three levels as well as mode-matching efficiency of a rubidium laser pumped by a narrow-linewidth Ti:Sapphire laser under two different focal conditions. In the evaluation, at least two values of the output power of a rubidium laser must be known, which are usually obtained from the experiment. We performed a series of experiments by using two pump lenses with two focal lengths of 150 and 200 mm, and acquired two corresponding values of the laser output power. Then, we applied the experimental results in the theoretical calculation and then obtained the population densities of three levels and mode-matching efficiency of the rubidium laser. The study demonstrates that the outputted pump power can be used for evaluation of the population densities of three levels and mode-matching efficiency of an alkali laser under the different experimental conditions. The study might be valuable to better understand the physical features of an alkali vapor laser and to optimize the configuration of a high-powered alkali laser in the future.
Comprehensive analysis of kinetic and fluid dynamic processes in flowing-gas diode-pumped alkali vapor amplifiers is reported. Taking into account effects of the temperature, the amplified spontaneous emission, the saturation power, the excitation of the alkali atoms to high electronic levels and the ionization, a detailed physical model is established to simulate the output performance of flowing-gas diode-pumped alkali vapor amplifiers. Influences of the flow velocity and the pump power on the amplified power are calculated and analyzed. Comparisons between single and double amplifier, longitudinal and transverse flow are made. Results show that end-pumped cascaded amplifier can provide higher output power under the same total pump power and the cell length, while output powers achieved by single- and double-end pumped, double-side pumped amplifiers with longitudinal or transverse flow have a complicated but valuable relation. Thus the model is extremely helpful for designing high-power flowing-gas diode-pumped alkali vapor amplifiers.
We calculated the oscillation power and total linewidth of the diode-laser-pumped Rb87 maser with spatial variations of the pumping rate and the radiative microwave field in the resonance cell. It is found that the maximum oscillation power P max corresponding to the optimum pumping rate Γ opt does not increase monotonically with the atomic density n 0 and that the short-term frequency stability of the maser corresponding to P max is about a factor of three better than that currently obtained with a lamp-pumped Rb87 maser. Some results are in fair agreement with our previous experiments. We also examined the variation of the oscillation powers vs light intensity in an average mode for three laser-pumping schemes with different frequencies and polarizations of the diode lasers.
Abstract We present experimental results of an exciplex-pumped alkali laser (XPAL) at 780 nm based on the 5 2 P 3/2 → 5 2 S 1/2 transition of the Rb atom in mixtures of Rb vapor and Ar. A laboratory-built Ti:sapphire laser with a pulse repetition rate of 3 kHz and a pulse width of 100 ns is used as the pump source. The maximum laser pulse energy of 0.26 µJ at 780 nm is obtained under an absorbed pump pulse energy of 42 µJ at 755 nm in mixtures of Rb vapor and Ar at a temperature of 423 K, corresponding to an optical conversion efficiency of 0.62%. Further experiments show that the output laser at 780 nm can always be detected for pump wavelengths ranging from 754 to 759 nm, indicating that Rb–Ar mixtures can be effectively pumped by commercial laser diodes (LDs) with a bandwidth of 5 nm.
The optimal detuning of the pump light at the rubidium D2 line is calculated and experimentally validated. A three-level optically end-pumped model in a hot rubidium vapor cell is demonstrated, which takes into account the hyperfine structure of the ground state, various collisional processes, and the nonlinear absorption of the pump light along the cell length. By developing a constrained optimization model, we calculate the optimal detuning of the pump light that maximizes the average excited state atom concentration in the cell. Experimentally, a 1529 nm probe light at higher levels, which is attenuated to the weak-probe limit, is introduced to accurately characterize the excited state atom concentration. Coupling with the experimental results, the variation of the pump light optimal detuning with the temperature and the pump light intensity at the unsaturated pumping is analyzed. At the optimal detuning point, the theoretical decay function of the pump light percentage along the vapor cell length almost coincides regardless of the temperature and the pump light intensity changes. Moreover, the theoretical fitted pump light decay function at optimal detuning is predicted. The fitted pump light percentage exiting the vapor cell is 4.75%. A fast implementation method to achieve the maximal average excited state atom concentration in the experiment is demonstrated.