Quantum mechanics, despite its abstract and unintuitive nature, is increasingly used in real-life applications. This thesis explores the current status of cavity quantum electrodynamics and its role in applications of quantum optics to quantum technologies. Various approaches to the treatment of optical cavities are discussed, with particular focus on a treatment in terms of cavities as linear optical devices, with a nonlinearity introduced by an atom, molecule, quantum dot etc in the cavity. Open quantum systems such as optical cavities coupled to a free external radiation field can be described by a quantum master equation. This thesis develops a description of such a system in which the Hamiltonian describes the coherent evolution of light inside the cavity, and the damping term describes the leaking of light out of the cavity mirrors. The goal of this approach is to describe couple networks of optical cavities in which information is transferred across the network coherently.
Quantum mechanics, despite its abstract and unintuitive nature, is increasingly used in real-life applications. This thesis explores the current status of cavity quantum electrodynamics and its role in applications of quantum optics to quantum technologies. Various approaches to the treatment of optical cavities are discussed, with particular focus on a treatment in terms of cavities as linear optical devices, with a nonlinearity introduced by an atom, molecule, quantum dot etc in the cavity. Open quantum systems such as optical cavities coupled to a free external radiation field can be described by a quantum master equation. This thesis develops a description of such a system in which the Hamiltonian describes the coherent evolution of light inside the cavity, and the damping term describes the leaking of light out of the cavity mirrors. The goal of this approach is to describe couple networks of optical cavities in which information is transferred across the network coherently.
Starting with early experiments about lifetimes of excited atoms near metallic boundaries, I review the evolution of Cavity Quantum Electrodynamics in the microwave and in the optical domains. The coherent coupling of single atoms with photons in high-Q cavities has led to the demonstration of fundamental quantum effects in light-matter interaction processes and to the generation of micromasers and microlasers emitting radiation with non-classical properties. It has made possible the development of single photon light sources and efficient detectors of single atoms as well as the implementation of quantum information and communication procedures in which atoms and photons play the roles of quantum bits. Mesoscopic superpositions of field states have been generated by entangling single atoms to fields made of many photons and the decoherence of these states has been studied, shedding new light on the quantum to classical boundary. Cavity Quantum Electrodynamics has also led recently to the quantum non-demolition counting of photons in a cavity, opening new perspectives for studying non-classical states of radiation. These atomic physics experiments are now extended - with promising applications in perspective - to the study of solid-state devices with microcavities built on substrates and coupled to artificial atoms such as quantum dots or superconducting junctions.
In order to study quantum effects such as state superposition and entanglement, one would like to construct simple systems for which the damping rates are slow relative to the rate of coherent evolution. One such system is strong-coupling cavity quantum electrodynamics (QED), in which a single atom is coupled to a single mode of a high finesse optical cavity. In recent years, optical trapping techniques have been applied to the cavity QED system, allowing an individual atom to remain coupled to the cavity for long periods of time. For the purpose of future cavity QED experiments, one would like to gain as much control over the trapped atom as possible; in particular, one would like to cool the center of mass motion of the atom, to measure the magnetic field at the location of the atom, and to be able to prepare the atom in a given internal state. In the first part of this thesis, I present a scheme for driving Raman transitions inside the cavity that can be used to achieve these goals. After giving a detailed theoretical treatment of the Raman scheme, I describe how it can be implemented in the lab and discuss some preliminary experimental results. In the second part of this thesis, I present a number of simple field theory models. These models were developed in an attempt to understand some of the central ideas of theoretical physics by looking at how the ideas work in a highly simplified context. The hope is that by reducing the mathematical complexity of an actual theory, the underlying physical concepts can be more easily understood.
The article gives an introduction into some of the basic cavity QED concepts, highlights some recent achievements and addresses some of the perspectives opened up by the ability to precisely control individual atomic and photonic quantum objects. Optical cavity QED with its ability to detect individual atoms and single photons plays an increasingly important role for various applications. The importance of optical cavity QED for the advance of quantum electronics can be highlighted by the rapidly growing number of research groups, the exponentially increasing number of publications and citations, and the increasing number of cavity designs ranging from the standard standing-wave Fabry-Perot cavity with dielectric mirrors to nanostructured slabs with a photonic band gap and high-quality running-wave microtoroids with optical fibre coupling.
Non-relativistic quantum mechanics have proven to be a significant framework to understand the non-classical behaviour of light and the microcosmos. Perhaps, one of the first technological revolutions within quantum theory came with the invention of the transistor, whereby a purely quantum mechanical description was required. Currently, another outstanding revolution is taking place in a crossroad where information science meets quantum mechanics (this being the quantum information field). Such an area of work contemplates both the fascinating theoretical aspect of quantum correlations, as well as implementations towards quantum tasks performed by a universal quantum computer; tasks that cannot be realised (or they are hard to implement) within the classical domain. This Thesis is devoted to study the dynamics of quantum entanglement in spin-optomechanics systems. In particular, we explore the quantum stabilization of quantum entanglement, a quantum concentration scheme in opto-mechanics and an interfacing of matter and light towards quantum networking applications. Additionally, we also investigate theoretical aspects of quantum correlations within thermal environments, as well as the topical area of quantum sudden transitions. In Chapter 1, we provide a brief summary of quantum information and of the quantum optics framework to cover elementary concepts and techniques used subsequently in this work. Subsequently, in Chapter 2 we present the stabilization of quantum entanglement in a non-linear qubit-oscillator system. The inclusion of a modest nonlinearity gives three results, i) the loss of periodicity of the system, ii) the occurrence of quadrature squeezing appearing for a short time, and iii) the quantum entanglement reaches higher values in contrast to the case without non-linearity. In Chapter 3, a technique to concentrate/distill a two-mode vacuum state in optomechanics via unsharp measurements is presented. Here, one of the optical modes is injected into a cavity at first, and thereafter, it is nonlinearly coupled to a mechanical oscillator. Afterwards, the position of the oscillator is measured using pulsed optomechanics and homodyne detection. The results show that this measurement can conditionally increase the initial entanglement. Next, in Chapter 4, stimulated by optomechanical transducers and quantum networking, a light-matter system is constructed where a qubit is coupled to a cavity mode mediated through a mechanical oscillator. The qubit-oscillator conditionally displaced Hamiltonian and the oscillator-cavity radiation-pressure interaction generate a maximal qubit-cavity entanglement. Additionally, we consider the case in which the cavity mode is coupled to a waveguide, numerical calculations show a promising qubit-fibre entanglement under a weak matter-light coupling. For the quantum network case, we coupled a generic qubit in the first node to a second qubit-cavity distant Jaynes-Cummings system coupled through an optical fibre, where qubit-qubit correlations can be achieved in the quantum open systems scenario. In Chapter 5, we study the evolution of an open quantum system within the Born-Markov microscopic master equation (MME). Essentially, two distant two-level atoms are trapped in fibre-coupled cavities. Under the approximation of one-excitation allowed in the atom-cavity-fibre basis, we can obtain quantum correlations induced by thermal fluctuations from the environments. Lastly, in Chapter 6, we bring together previously elements explored in this Thesis. The system is a hybrid atomic-mechanical system formed from two remote qubits interacting with individual harmonic oscillators. This system, as in Chapter 4, explores interesting applications in quantum networking schemes. The two qubits are initially prepared in a Bell-diagonal state, and consequently the two-qubit correlations exhibit few interesting effects such as freezing, sudden changes and revivals in the evolution of the quantum entropic discord. To conclude, I summarize my findings in Chapter 7.
This dissertation contains a study of ultracold atoms in optical cavities. We particularly focus on two aspects of the coupled atom-cavity systems. In the first aspect, we implement the quantum nature of the light field to probe the quantum state of the atoms. This is interesting due to the nondestructive nature of the characterization of many-body atomic states. In the second aspect we study the cavity optomechanics that investigates the coupling of mechanical and optical degrees of freedom via radiation pressure. The optomechanical cavity provides an interesting nonlinear system to study the coupling between atoms and the intracavity field.In the context of cavity quantum electrodynamics we study the reflection of two counter-propagating modes of the light field in a high-Q ring cavity by ultracold atoms either in the Mott insulator state or in the superfluid state of an optical lattice. We find that the dynamics of the reflected light strongly depends on both the lattice spacing and the state of the matter-wave field. By using the Monte Carlo wave-function method to account for the cavity damping we also determine the two-time correlation function and the time-dependent physical spectrum of theretroreflected field. We find that the light field and the atoms become entangled if the latter are in a superfluid state. We also analyze quantitatively the entanglement between the atoms and the light.In cavity optomechanics the mechanical effect can either comes from a vibrating macroscopic oscillator or a collective density excitation of a Bose-Einstein condensate. First we use a Fabry-Perot-type cavity to study the opto-mechanically-induced bistable quantum phase transitions between superfluid and a Mott insulator states of an ultracold bosonic gases trapped inside the cavity. Secondly, we study the symmetricand antisymmetric collective density side modes of the BEC which results from the optomechanical effects of the light fields in a ring cavity.
Cavity quantum electrodynamics (cavity QED) describes the interactions of single atoms and single photons in a resonator. In the laboratory, state-of-the-art experiments are able to observe the dynamics of these simple yet fundamental quantum systems. The recent development of quantum information science has also introduced a new role for cavity QED systems as quantum interfaces, in which information can be coherently mapped between photonic and atomic quantum bits. Groundbreaking optical cavity QED experiments in the past twenty years would not have been possible without the technological development of mirror coatings with extremely low scatter and absorption losses. Thermal noise has typically played a smaller role in cavity QED experiments but in certain instances is nevertheless important to consider. In this chapter, we begin with an overview of optical cavity QED experiments and some of the central questions that they address. It is hoped that this description, while by no means exhaustive, will provide a window for the nonspecialist into basic techniques and motivations in the field. We then turn to focus on the roles played by scattering and absorption loss and mechanical loss. We discuss how these losses have set limits on feasible experiments and the extent to which improvements may be possible. Experimental realizations of cavity QED systems An idealized cavity QED system consists of one atom placed between two highly reflective mirrors (Figure 17.1). In this model, a single atomic transition interacts with photons in a single cavity mode; the atom is often pictured at an antinode of the cavity standing wave, where it has a maximal dipole interaction with the cavity field.