Abstract Single‐mode hollow‐core waveguides loaded with atomic ensembles offer an excellent platform for light–matter interactions and nonlinear optics at low photon levels. We review and discuss possible approaches for incorporating mirrors, cavities, and Bragg gratings into these waveguides without obstructing their hollow cores. With these additional features controlling the light propagation in the hollow‐core waveguides, one could potentially achieve optical nonlinearities controllable by single photons in systems with small footprints that can be integrated on a chip. We propose possible applications such as single‐photon transistors and superradiant lasers that could be implemented in these enhanced hollow‐core waveguides.
Abstract Single‐mode hollow‐core waveguides loaded with atomic ensembles offer an excellent platform for light–matter interactions and nonlinear optics at low photon levels. We review and discuss possible approaches for incorporating mirrors, cavities, and Bragg gratings into these waveguides without obstructing their hollow cores. With these additional features controlling the light propagation in the hollow‐core waveguides, one could potentially achieve optical nonlinearities controllable by single photons in systems with small footprints that can be integrated on a chip. We propose possible applications such as single‐photon transistors and superradiant lasers that could be implemented in these enhanced hollow‐core waveguides.
Engineering photon-photon interactions is fundamentally challenging because photons in vacuum do not interact with each other. While their interactions can be mediated using optical nonlinearities, these effects are negligible for individual photons. This thesis explores two topics related to optical nonlinearities in waveguides. In the first part, we perform a numerical simulation study of hollow core antiresonant reflecting optical waveguides (ARROWs) fabricated using standard lithographic techniques in the context of their suitability as a platform for on-chip photonic quantum information processing. We investigate the effects of the core size, the number of pairs of antiresonant layers surrounding the hollow core, and the refractive index contrast between cladding materials on propagation losses in the waveguide. Additionally, we explore the feasibility of integrating these waveguides with Bragg gratings and dielectric metasurface mirrors to form on-chip cavities, that when loaded with atomic ensembles could act as nonlinear optical devices controllable with single photons. \n \nThe second part of this thesis studies the application of a 3 level quantum emitter coupled to a directional optical waveguide to deterministically subtract a single photon from a propagating optical pulse. Subtracting a single photon from a light state is one of the most fundamental operations with important applications in quantum information processing. However, current methods to subtract a photon such as using a low reflectivity beam splitter suffer from inherently low success probabilities as well as a strong dependence on the number of photons in the input. We explore implementing this single photon subtraction operation in our proposed system when the optical input is a continuous wave coherent state, coherent pulsed state containing a finite number of photons, or a Fock state.
Abstract Atomic spectroscopy is a well‐established, integral part of the physicist's toolbox with an extremely broad range of applications ranging from astronomy to single atom quantum optics. While highly desirable, miniaturization of atomic spectroscopy techniques on the chip scale was hampered by the apparent incompatibility of conventional solid‐state integrated optics and gaseous media. Here, the state of the art of atomic spectroscopy in hollow‐core optical waveguides is reviewed The two main approaches to confining light in low index atomic vapors are described: hollow‐core photonic crystal fiber (HC‐PCF) and planar antiresonant reflecting optical waveguides (ARROWs). Waveguide design, fabrication, and characterization are reviewed along with the current performance as compact atomic spectroscopy devices. The article specifically focuses on the realization of quantum interference effects in alkali atoms which may enable radically new optical devices based on low‐level nonlinear interactions on the single photon level for frequency standards and quantum communication systems.
Techniques to controllably interface atoms with quantum optical fields form the basis for many applications in quantum information science. For example, photons are convenient to relay information over large quantum networks, while atoms naturally are physical systems that can process and store this information. Thus far, the available techniques to efficiently couple single photons with atomic media fall into one of the following, mostly independent, categories: i) cavity quantum electrodynamics (QED), where atomic interactions with light are enhanced via a high-finesse cavity, ii) coherent coupling with atomic ensembles exhibiting large optical depths, and iii) the use of fields tightly focused to dimensions smaller than or approaching the scattering cross-section of a single atom. Although remarkable achievements have been made with all of these approaches, a robust, scalable technique remains elusive. Recently, several groups have successfully demonstrated that cold atoms can be trapped near and interfaced with nanophotonic systems, such as hollow-core photonic crystal fibers [1] and tapered nanofibers [2–4]. The traps are well-characterized [2, 3, 5], and the nearly diffraction-limited transverse confinement of optical fields enables ∼ 10% coupling efficiency of a single atom to the fiber [2, 3]. This has already led to remarkable observations of strong light-matter interactions using relatively few atoms and low powers [1]. It has also been proposed that such techniques can be extended to highly configurable photonic crystal waveguides [6]. Together, these efforts raise the intriguing possibility for future nanophotonic systems with tremendous figures of merit, wherein atom-light interactions can be tailored nearly at will. Here, we discuss recent efforts to develop novel techniques to realize strong, controllable atom-photon and photon-photon interactions, which take full advantage of the parameter space afforded by nanophotonic interfaces and are not based upon the extension of existing techniques. As a specific example, we discuss a protocol to achieve “all-atomic” cavity QED [7], as briefly described below. First, we show that although the single-atom coupling to guided modes of a nanophotonic waveguide might be relatively weak, there exist collective modes of a trapped atomic ensemble whose coupling to light is enhanced by the square root of the atom number, √ NA. While collective effects are generally well-known, special consequences emerge in the nanofiber system when the atoms are trapped in a lattice. In particular, collective effects cause such a lattice to act as a near-perfect mirror for an incident field close to resonance. In analogy to cavity QED, we then demonstrate that two sets of atomic mirrors can form an effective cavity, which can greatly enhance the coupling of a single, specially chosen “impurity” atom (or a few impurity atoms) positioned inside. We introduce a novel quantum spin model to describe the atom-light coupling, which allows one to exactly map the atom-nanofiber interface onto the simple and elegant Jaynes-Cummings model of cavity QED [8]. A unique feature of our atomic mirrors compared to conventional cavities is that they have long relaxation times and are highly dispersive. Remarkably, even with very low mirror finesse (F ∼ 10 2 ), this property allows one to attain the “strong coupling” regime of cavity QED, where vacuum Rabi oscillations [9–12] occur between an excited impurity atom and a single “photon” stored in the cavity (or more precisely, in the atomic mirrors). Furthermore, as quantum mechanical objects, these atom mirrors can be used to store quantum information and transfer this information into propagating waveguide modes. These various features can be combined to realize all of the building blocks for scalable quantum information processing.
Atomic vapors of alkali metals are widely used to slow and stop light in tabletop experiments. In order to take advantage of the underlying quantum interference effects in future commercial devices, highly reactive alkali atoms must be incorporated into small volumes with integrated optical access. With integration in mind, we describe the development of a hollow-core waveguide technology based on the combination of vapor-filled hollow waveguides and conventional solid-core waveguides on a silicon chip. We discuss the underlying principles of the waveguide design, the development of different approaches to building on-chip vapor cells, the demonstration of linear and nonlinear rubidium spectroscopy on a chip, and the prospects for quantum interference effects such as slow light and giant Kerr nonlinearities using this approach. Ultrasmall active vapor volumes on the order of 100 picoliters with simultaneously high optical density in excess of two illustrate the potential of planar hollow-core waveguides for linear and nonlinear optical spectroscopy of atoms confined on a chip.
The focus of this thesis is to investigate and fabricate a platform that can facilitate the enhancement of light-matter interactions. By tightly confining the photons and atoms to the same region of space, the probability of interaction is drastically increased as compared to free space interactions. Specifically, we focus on forming an optical cavity (or resonator) incorporated into a hollow-core photonic crystal fiber (HCPCF) using two distinct types of reflective mirrors along the axis of the fiber while still permitting atoms to be loaded into the region of high field confinement. \n \nOne means of pursuing this goal that we explored was to propose and numerically simulate two methods for implementing Bragg gratings in a HCPCF. These two methods leave the hollow-core unobstructed and are both based on controlled selective injection of photosensitive polymers into the photonic-crystal region of the hollow-core fiber, followed by interference photolithography. We report the results of numerical simulations for the hollow core fiber with Bragg gratings formed by the two methods. We find that a reflectivity of > 99.99% should be achievable from such fiber-integrated mirrors. Such a device could support high cooperativity and strong coupling regimes to be achieved. \n \nWe also demonstrate a fiber-integrated Fabry-Pérot cavity formed by attaching a pair of dielectric metasurfaces to the ends of a hollow-core photonic-crystal fiber segment. The metasurfaces consist of perforated membranes designed as photonic-crystal slabs that act as planar mirrors but can potentially allow injection of gases through their holes into the hollow core of the fiber. We have so far observed cavities with finesse of 11 and Q-factors of ~ 4.5 × 10^5, but much higher values should be achievable with improved fabrication procedures. We expect this device to enable the advancement of new fiber lasers, enhanced gas spectroscopy, and studies of fundamental light-matter interactions and nonlinear optics. These mirrors can be designed to be polarization dichroic — transparent for one polarization and reflective for another. This unique property can be exploited to allow for all signals to be directed along the high optical depth axis of the cavity and may provide a excellent platform for applications such as optical switching. \n \nFinally, we develop a novel protocol for a single photon all-optical transistor and how it may be implemented in the above mentioned fiber cavity systems. This unique scheme utilizes a far off-resonant vacuum cavity mode to stimulate a Raman absorption process of a source photon which may be switched off by the insertion of a single gate photon into the cavity mode. Relatively high switching contrasts and ratios for the source photon transmission can be obtained in our system.
A hollow-core waveguide structure for on-chip atomic spectroscopy is presented. The devices are based on Anti-Resonant Reflecting Optical Waveguides and may be used for a wide variety of applications which rely on the interaction of light with gases and vapors. The designs presented here feature short delivery paths of the atomic vapor into the hollow waveguide. They also have excellent environmental stability by incorporating buried solid-core waveguides to deliver light to the hollow cores. Completed chips were packaged with an Rb source and the F = 3 ≥ F′ = 2, 3, 4 transitions of the D2 line in 85Rb were monitored for optical absorption. Maximum absorption peak depths of 9% were measured.