Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser & Photonics Review

Atomic spectroscopy and quantum optics in hollow‐core waveguides

Holger Schmidt, Aaron R. Hawkins

Published Feb 1, 2010• 27 citations
Publisher

Abstract

Abstract Atomic spectroscopy is a well‐established, integral part of the physicist's toolbox with an extremely broad range of applications ranging from astronomy to single atom quantum optics. While highly desirable, miniaturization of atomic spectroscopy techniques on the chip scale was hampered by the apparent incompatibility of conventional solid‐state integrated optics and gaseous media. Here, the state of the art of atomic spectroscopy in hollow‐core optical waveguides is reviewed The two main approaches to confining light in low index atomic vapors are described: hollow‐core photonic crystal fiber (HC‐PCF) and planar antiresonant reflecting optical waveguides (ARROWs). Waveguide design, fabrication, and characterization are reviewed along with the current performance as compact atomic spectroscopy devices. The article specifically focuses on the realization of quantum interference effects in alkali atoms which may enable radically new optical devices based on low‐level nonlinear interactions on the single photon level for frequency standards and quantum communication systems.

DOI
10.1002/lpor.200900040

Related papers

Fabrication methods for compact atomic spectroscopy

Aaron R. Hawkins, John F. Hulbert, Brandon T. Carroll +2 more

Atomic spectroscopy relies on photons to probe the energy states of atoms, typically in a gas state. In addition to providing fundamental scientific information, this technique can be applied to a number of photonic devices including atomic clocks, laser stabilization references, slow light elements, and eventually quantum communications components. Atomic spectroscopy has classically been done using bulk optics and evacuated transparent vapor cells. Recently, a number of methods have been introduced to dramatically decrease the size of atomic spectroscopy systems by integrating optical functionality. We review three of these techniques including: 1) photonic crystal fiber based experiments, 2) wafer bonded mini-cells containing atomic vapors and integrated with lasers and detectors, and 3) hollow waveguides containing atomic vapors fabricated on silicon substrates. In the context of silicon photonics, we will emphasize the hollow waveguide platform. At the heart of these devices is the anti-resonant reflecting optical waveguide (ARROW). ARROW fabrication techniques will be described for both hollow and solid core designs. Solid-core waveguides are necessary to direct light on and off the silicon chip while confining atomic vapors to hollow-core waveguides. We will also discuss the methods and challenges of attaching rubidium vapor reservoirs to the chip. Experimental results for optical spectroscopy of rubidium atoms on a chip will be presented.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 28, 2008•1 citation

Planar Hollow-Core Waveguide Technology for Atomic Spectroscopy and Quantum Interference in Alkali Vapors

Bin Wu, John F. Hulbert, Aaron R. Hawkins +1 more

Atomic vapors of alkali metals are widely used to slow and stop light in tabletop experiments. In order to take advantage of the underlying quantum interference effects in future commercial devices, highly reactive alkali atoms must be incorporated into small volumes with integrated optical access. With integration in mind, we describe the development of a hollow-core waveguide technology based on the combination of vapor-filled hollow waveguides and conventional solid-core waveguides on a silicon chip. We discuss the underlying principles of the waveguide design, the development of different approaches to building on-chip vapor cells, the demonstration of linear and nonlinear rubidium spectroscopy on a chip, and the prospects for quantum interference effects such as slow light and giant Kerr nonlinearities using this approach. Ultrasmall active vapor volumes on the order of 100 picoliters with simultaneously high optical density in excess of two illustrate the potential of planar hollow-core waveguides for linear and nonlinear optical spectroscopy of atoms confined on a chip.

Journal of Lightwave Technology•Dec 1, 2008•11 citations

On-Chip Atomic Spectroscopy

Donald B. Conkey

This thesis presents the integration of atomic vapor cells with anti-resonant reflecting optical waveguides (ARROWs) fabricated on silicon chips. These potentially provide a compact platform for a number of optical applications, including the study of quantum coherence effects such as electromagnetically induced transparency and single-photon nonlinearities, as well as frequency stabilization standards. The use of hollow waveguides allows for light propagation in low index (vapor) media with compact mode areas. ARROWs make particularly attractive waveguides for this purpose because they can be interfaced with solid core waveguides, microfabricated on a planar substrate, and are effectively single mode. ARROW fabrication utilizes an acid-removed sacrificial core surrounded by alternating plasma deposited dielectric layers, which act as Fabry-Perot reflectors. To demonstrate the effectiveness of the ARROW as a vapor cell, a platform consisting of solid and hollow core waveguides integrated with rubidium vapor cells was developed. A variety of sealing techniques were tested for vapor cell integration with the ARROW chip and for compatibility with rubidium. Rubidium was used because it is of particular interest for studying quantum coherence effects. Liquefied rubidium was transferred from a bulk supply into an on-chip vapor cell in an anaerobic atmosphere glovebox. Optical absorption measurements confirmed the presence of rubidium vapor within the hollow waveguide platform. Further analysis of the measurements revealed high optical density of rubidium atoms in the hollow core. Saturated absorption spectroscopy measurements verified that the on-chip integrated vapor cell was suitable for common precision spectroscopy applications.

•Jan 1, 2007•1 citation

Recent progress in waveguide-based atom photonics

Jennifer A. Black, Matthieu Giraud-Carrier, Aaron R. Hawkins +1 more

We review a hollow-core anti-resonant reflecting optical waveguide (ARROW) based platform for atom photonics. This platform has been used to demonstrate linear and non-linear spectroscopy and quantum coherence effects in hot rubidium vapor on chip. We discuss several advancements to this platform. All-metal seals significantly improve the lifetime of integrated alkali vapor cells. Additional control beams can be used to produce slower light and to slow down atoms via optical scattering and gradient forces. Specifically, a new technique for slowing atoms on a chip based on a spatially varying AC Stark shift is discussed. Moreover, the planarity of the ARROW waveguide platform lends itself to creating advanced layouts with multiple integrated vapor cells for implementing a variety of photonic device functions.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 10, 2015•0 citations

Rubidium spectroscopy on a chip

Holger Schmidt, Wenge Yang, Bin Wu +4 more

We review the current status of integrating optical quantum interference effects such as electromagnetically induced transparency (EIT), slow light, and highly efficient nonlinear processes on a semiconductor chip. A necessary prerequisite for combining effects such as slow light and related phenomena with the convenience of integrated optics is the development of integrated alkali vapor cells. Here, we describe the development of integrated rubidium cells based on hollow-core antiresonant reflecting optical waveguides (ARROWs). Hollow-core waveguides were fabricated on a silicon platform using conventional microfabrication and filled with rubidium vapor using different methods. Rubidium absorption through the waveguides was successfully observed which opens the way to integrated atomic and molecular on a chip. The realization of quantum coherence effects requires additional surface treatment of the waveguide walls, and the effects of the surface coating on the waveguide properties are presented.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 8, 2007•1 citation

Towards integration of quantum interference in alkali atoms on a chip

Holger Schmidt, Dongliang Yin, Wenge Yang +4 more

We discuss a new integrated approach to realizing optical quantum interference effects such as electromagnetically induced transparency (EIT), slow light, and highly efficient nonlinear processes on a semiconductor chip. An ensemble of alkali atoms represents one of the canonical systems that exhibit slow light and related phenomena. At the same time, it would be desirable to build slow-light and related devices on a semiconductor platform in order to move to practical applications. We review progress towards combining the large magnitude of quantum interference effects in alkali vapors with the convenience of integrated optics in the form of hollow-core antiresonant reflecting optical waveguides (ARROWs). We discuss the benefits and challenges of this integrated approach with special emphasis on nonlinear optics. We present strategies to optimize the optical waveguides and discuss the current status of building rubidium-filled optical waveguides on a chip. Recent results on optimization of waveguide loss and transfer of rubidium atoms through hollow microchannels on a chip are presented.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 9, 2006•4 citations
Abstract Atomic spectroscopy is a well‐established, integral part of the physicist's toolbox with an extremely broad range of applications ranging from astronomy to single atom quantum optics. While highly desirable, miniaturization of atomic spectroscopy techniques on the chip scale was hampered by the apparent incompatibility of conventional solid‐state integrated optics and gaseous media. Here, the state of the art of atomic spectroscopy in hollow‐core optical waveguides is reviewed The two main approaches to confining light in low index atomic vapors are described: hollow‐core photonic crystal fiber (HC‐PCF) and planar antiresonant reflecting optical waveguides (ARROWs). Waveguide design, fabrication, and characterization are reviewed along with the current performance as compact atomic spectroscopy devices. The article specifically focuses on the realization of quantum interference effects in alkali atoms which may enable radically new optical devices based on low‐level nonlinear interactions on the single photon level for frequency standards and quantum communication systems.
Atomic spectroscopy relies on photons to probe the energy states of atoms, typically in a gas state. In addition to providing fundamental scientific information, this technique can be applied to a number of photonic devices including atomic clocks, laser stabilization references, slow light elements, and eventually quantum communications components. Atomic spectroscopy has classically been done using bulk optics and evacuated transparent vapor cells. Recently, a number of methods have been introduced to dramatically decrease the size of atomic spectroscopy systems by integrating optical functionality. We review three of these techniques including: 1) photonic crystal fiber based experiments, 2) wafer bonded mini-cells containing atomic vapors and integrated with lasers and detectors, and 3) hollow waveguides containing atomic vapors fabricated on silicon substrates. In the context of silicon photonics, we will emphasize the hollow waveguide platform. At the heart of these devices is the anti-resonant reflecting optical waveguide (ARROW). ARROW fabrication techniques will be described for both hollow and solid core designs. Solid-core waveguides are necessary to direct light on and off the silicon chip while confining atomic vapors to hollow-core waveguides. We will also discuss the methods and challenges of attaching rubidium vapor reservoirs to the chip. Experimental results for optical spectroscopy of rubidium atoms on a chip will be presented.
Atomic vapors of alkali metals are widely used to slow and stop light in tabletop experiments. In order to take advantage of the underlying quantum interference effects in future commercial devices, highly reactive alkali atoms must be incorporated into small volumes with integrated optical access. With integration in mind, we describe the development of a hollow-core waveguide technology based on the combination of vapor-filled hollow waveguides and conventional solid-core waveguides on a silicon chip. We discuss the underlying principles of the waveguide design, the development of different approaches to building on-chip vapor cells, the demonstration of linear and nonlinear rubidium spectroscopy on a chip, and the prospects for quantum interference effects such as slow light and giant Kerr nonlinearities using this approach. Ultrasmall active vapor volumes on the order of 100 picoliters with simultaneously high optical density in excess of two illustrate the potential of planar hollow-core waveguides for linear and nonlinear optical spectroscopy of atoms confined on a chip.
This thesis presents the integration of atomic vapor cells with anti-resonant reflecting optical waveguides (ARROWs) fabricated on silicon chips. These potentially provide a compact platform for a number of optical applications, including the study of quantum coherence effects such as electromagnetically induced transparency and single-photon nonlinearities, as well as frequency stabilization standards. The use of hollow waveguides allows for light propagation in low index (vapor) media with compact mode areas. ARROWs make particularly attractive waveguides for this purpose because they can be interfaced with solid core waveguides, microfabricated on a planar substrate, and are effectively single mode. ARROW fabrication utilizes an acid-removed sacrificial core surrounded by alternating plasma deposited dielectric layers, which act as Fabry-Perot reflectors. To demonstrate the effectiveness of the ARROW as a vapor cell, a platform consisting of solid and hollow core waveguides integrated with rubidium vapor cells was developed. A variety of sealing techniques were tested for vapor cell integration with the ARROW chip and for compatibility with rubidium. Rubidium was used because it is of particular interest for studying quantum coherence effects. Liquefied rubidium was transferred from a bulk supply into an on-chip vapor cell in an anaerobic atmosphere glovebox. Optical absorption measurements confirmed the presence of rubidium vapor within the hollow waveguide platform. Further analysis of the measurements revealed high optical density of rubidium atoms in the hollow core. Saturated absorption spectroscopy measurements verified that the on-chip integrated vapor cell was suitable for common precision spectroscopy applications.
We review a hollow-core anti-resonant reflecting optical waveguide (ARROW) based platform for atom photonics. This platform has been used to demonstrate linear and non-linear spectroscopy and quantum coherence effects in hot rubidium vapor on chip. We discuss several advancements to this platform. All-metal seals significantly improve the lifetime of integrated alkali vapor cells. Additional control beams can be used to produce slower light and to slow down atoms via optical scattering and gradient forces. Specifically, a new technique for slowing atoms on a chip based on a spatially varying AC Stark shift is discussed. Moreover, the planarity of the ARROW waveguide platform lends itself to creating advanced layouts with multiple integrated vapor cells for implementing a variety of photonic device functions.
We review the current status of integrating optical quantum interference effects such as electromagnetically induced transparency (EIT), slow light, and highly efficient nonlinear processes on a semiconductor chip. A necessary prerequisite for combining effects such as slow light and related phenomena with the convenience of integrated optics is the development of integrated alkali vapor cells. Here, we describe the development of integrated rubidium cells based on hollow-core antiresonant reflecting optical waveguides (ARROWs). Hollow-core waveguides were fabricated on a silicon platform using conventional microfabrication and filled with rubidium vapor using different methods. Rubidium absorption through the waveguides was successfully observed which opens the way to integrated atomic and molecular on a chip. The realization of quantum coherence effects requires additional surface treatment of the waveguide walls, and the effects of the surface coating on the waveguide properties are presented.
We discuss a new integrated approach to realizing optical quantum interference effects such as electromagnetically induced transparency (EIT), slow light, and highly efficient nonlinear processes on a semiconductor chip. An ensemble of alkali atoms represents one of the canonical systems that exhibit slow light and related phenomena. At the same time, it would be desirable to build slow-light and related devices on a semiconductor platform in order to move to practical applications. We review progress towards combining the large magnitude of quantum interference effects in alkali vapors with the convenience of integrated optics in the form of hollow-core antiresonant reflecting optical waveguides (ARROWs). We discuss the benefits and challenges of this integrated approach with special emphasis on nonlinear optics. We present strategies to optimize the optical waveguides and discuss the current status of building rubidium-filled optical waveguides on a chip. Recent results on optimization of waveguide loss and transfer of rubidium atoms through hollow microchannels on a chip are presented.