Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Frontiers in Optics

An Atom Gyroscope Using a 2D Tilted Magneto-Optical Trap

Robert Simha, Erin M. Knutson, George R. Welch, Frank A. Narducci

Published Jan 1, 2015• 0 citations
Publisher

Abstract

We present atom interferometry measurements using a 2D tilted MOT atom source. The atoms’ transit times through multiple continuous Raman beams form the atom optic light pulses. Prospects for a dual sensor will be discussed.
DOI
10.1364/ls.2015.lth4d.4

Related papers

An Atom SAGNAC Interferometer With Continuous Cold Atomic Beam Sources

Zhixin Meng, Peiqiang Yan, Xiaojie Li +2 more

We present an atom interferometer with two counter-propagating continuous cold atomic beam of87Rb atoms as a gyroscope with high accuracy and high sampling rates. Two atomic beam sources are generated directly from 2D+Magneto-Optical Trappings (MOTs) with the flux of about 3×109atoms/s and mean longitudinal velocity of 10 m/s. Raman-Ramsey interference is experimentally demonstrated with the central fringe width of 54 Hz.

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)•Mar 1, 2020•2 citations

Closed-loop dual-atom-interferometer inertial sensor with continuous cold atomic beams

Zhi-Xin Meng, Pei-Qiang Yan, Shengzhe Wang +3 more

We demonstrate a closed-loop light-pulse atom-interferometer inertial sensor that can realize continuous decoupled measurements of acceleration and rotation rate. The sensor operates with double-loop atom interferometers, which share the same Raman light pulses in a spatially separated Mach-Zehnder configuration and use continuous cold atomic beams propagating in opposite directions from two ${\text{2D}}^{+}$ magneto-optical trappings. Acceleration and the rotation rate are decoupled and simultaneously measured by the sum and difference of dual-atom-interferometer signals, respectively. The sensitivities of inertial measurements are also increased to be approximately 1.86 times higher than that of a single atom interferometer. The acceleration phase shift is compensated in real time by phase locking these interferometers via the Raman laser phases from the sum-interferometer signal, and the gyroscope performance is improved. We achieve long-term stabilities of $6.1\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\text{g}$ and 840 nrad/s for the acceleration and the rotation rate, respectively, using a short interrogation time of 0.87 ms (interference area $A=0.097\phantom{\rule{0.2em}{0ex}}{\text{mm}}^{2}$). This work provides a building block for an atomic interferometer-based inertial measurement unit for use in field applications that require a high data rate and high stability.

arXiv:2210.15346•Physical Review Applied•Mar 22, 2024•21 citations

Cold Atom Source Containing Multiple Magneto-Optical Traps

Jaime Ramirez-Serrano, James M. Kohel, James R. Kellogg +3 more

An apparatus that serves as a source of a cold beam of atoms contains multiple two-dimensional (2D) magneto-optical traps (MOTs). (Cold beams of atoms are used in atomic clocks and in diverse scientific experiments and applications.) The multiple-2D-MOT design of this cold atom source stands in contrast to single-2D-MOT designs of prior cold atom sources of the same type. The advantages afforded by the present design are that this apparatus is smaller than prior designs.

•Oct 1, 2007•0 citations

Versatile compact atomic source for high-resolution dual atom interferometry

T. Müller, Thijs Wendrich, Michael Gilowski +3 more

We present a compact $^{87}\text{R}\text{b}$ atomic source for high precision dual atom interferometers. The source is based on a double-stage magneto-optical trap (MOT) design, consisting of a two-dimensional (2D) -MOT for efficient loading of a 3D-MOT. The accumulated atoms are precisely launched in a horizontal moving molasses. Our source generates a high atomic flux $(>{10}^{10}\text{ }\text{atoms}∕\text{s})$ with precise and flexibly tunable atomic trajectories as required for high resolution Sagnac atom interferometry. We characterize the performance of the source with respect to the relevant parameters of the launched atoms, i.e., temperature, absolute velocity, and pointing, by utilizing time-of-flight techniques and velocity selective Raman transitions.

arXiv:0705.4544•Physical Review A•Dec 13, 2007•41 citations

CONSTRUCTION AND CHARACTERIZATION OF A DUAL ATOMIC BEAM ACCELEROMETER/GYROSCOPE

Michael Manicchia

Current sensors used for inertial navigation are based on technology with inherent sensitivity limitations. Atom interferometry is a very promising replacement, which could yield many orders of magnitude of improvement in sensitivity, leading to more accurate navigation over longer periods of time relative to current technology. This research investigates the physics of atom interferometry through the construction and characterization of an atomic accelerometer/gyroscope combination. In contrast to current state-of-the-art atomic sensors, which use pulsed cold atom sources and pulsed laser beams, the apparatus investigated relies purely on continuous atomic and laser beams. These differences would result in a sensor that lends itself more readily to smaller sizing, lower power consumption, and reduced complexity. This change in approach to atomic interferometry also introduces challenges resulting from laser and atomic beam divergences and the velocity averaging due to both longitudinal and transverse temperature, which this dissertation shows how to overcome. The work contained herein explores many stages of construction of an atomic gyro including the demonstration and characterization of two-dimensional laser cooling of atoms, stimulated Raman transitions, and Ramsey and spin echo interference. The implications for future research are also outlined and discussed.

•Jun 1, 2020•1 citation

Raman spectroscopy in a continuous beam from a 2D MOT

Aaron Meldrum, Michael Manicchia, Frank A. Narducci +1 more

Atom interferometers consist of light pulses designed to create coherent superpositions of atomic states (“π/2” or “beam splitting” pulses) and that coherently interchange states (“π” or “mirror” pulses). In this article, we investigate the effects of imperfect pulses for a geometry specific to our apparatus. Atoms emerge from a 2-dimensional magneto-optical trap (2D MOT) in a continuous beam and cross continuous laser beams that drive stimulated Raman transitions. We use the atoms’ transit time through the laser field as the “pulse” time. We describe the impact of various effects on the contrast of the Rabi cycling, specifically the longitudinal velocity spread, the laser beam diameter and the spacing between the laser beams.

•Feb 22, 2018•0 citations
We demonstrate a closed-loop light-pulse atom-interferometer inertial sensor that can realize continuous decoupled measurements of acceleration and rotation rate. The sensor operates with double-loop atom interferometers, which share the same Raman light pulses in a spatially separated Mach-Zehnder configuration and use continuous cold atomic beams propagating in opposite directions from two 2D+{\text{2D}}^{+}2D+ magneto-optical trappings. Acceleration and the rotation rate are decoupled and simultaneously measured by the sum and difference of dual-atom-interferometer signals, respectively. The sensitivities of inertial measurements are also increased to be approximately 1.86 times higher than that of a single atom interferometer. The acceleration phase shift is compensated in real time by phase locking these interferometers via the Raman laser phases from the sum-interferometer signal, and the gyroscope performance is improved. We achieve long-term stabilities of $6.1\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\text{g}$ and 840 nrad/s for the acceleration and the rotation rate, respectively, using a short interrogation time of 0.87 ms (interference area A=0.097mm2A=0.097\phantom{\rule{0.2em}{0ex}}{\text{mm}}^{2}A=0.097mm2). This work provides a building block for an atomic interferometer-based inertial measurement unit for use in field applications that require a high data rate and high stability.
We present a compact 87Rb^{87}\text{R}\text{b}87Rb atomic source for high precision dual atom interferometers. The source is based on a double-stage magneto-optical trap (MOT) design, consisting of a two-dimensional (2D) -MOT for efficient loading of a 3D-MOT. The accumulated atoms are precisely launched in a horizontal moving molasses. Our source generates a high atomic flux (>1010 atoms∕s)(>{10}^{10}\text{ }\text{atoms}∕\text{s})(>1010 atoms∕s) with precise and flexibly tunable atomic trajectories as required for high resolution Sagnac atom interferometry. We characterize the performance of the source with respect to the relevant parameters of the launched atoms, i.e., temperature, absolute velocity, and pointing, by utilizing time-of-flight techniques and velocity selective Raman transitions.
Current sensors used for inertial navigation are based on technology with inherent sensitivity limitations. Atom interferometry is a very promising replacement, which could yield many orders of magnitude of improvement in sensitivity, leading to more accurate navigation over longer periods of time relative to current technology. This research investigates the physics of atom interferometry through the construction and characterization of an atomic accelerometer/gyroscope combination. In contrast to current state-of-the-art atomic sensors, which use pulsed cold atom sources and pulsed laser beams, the apparatus investigated relies purely on continuous atomic and laser beams. These differences would result in a sensor that lends itself more readily to smaller sizing, lower power consumption, and reduced complexity. This change in approach to atomic interferometry also introduces challenges resulting from laser and atomic beam divergences and the velocity averaging due to both longitudinal and transverse temperature, which this dissertation shows how to overcome. The work contained herein explores many stages of construction of an atomic gyro including the demonstration and characterization of two-dimensional laser cooling of atoms, stimulated Raman transitions, and Ramsey and spin echo interference. The implications for future research are also outlined and discussed.
Atom interferometers consist of light pulses designed to create coherent superpositions of atomic states (“π/2” or “beam splitting” pulses) and that coherently interchange states (“π” or “mirror” pulses). In this article, we investigate the effects of imperfect pulses for a geometry specific to our apparatus. Atoms emerge from a 2-dimensional magneto-optical trap (2D MOT) in a continuous beam and cross continuous laser beams that drive stimulated Raman transitions. We use the atoms’ transit time through the laser field as the “pulse” time. We describe the impact of various effects on the contrast of the Rabi cycling, specifically the longitudinal velocity spread, the laser beam diameter and the spacing between the laser beams.