Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0705.4544 · Physical Review A

Versatile compact atomic source for high-resolution dual atom interferometry

T. Müller, Thijs Wendrich, Michael Gilowski, C. Jentsch, Ernst Maria Rasel, Wolfgang A. Ertmer

Published Dec 13, 2007• 41 citations
arXivHTMLPDF

Abstract

We present a compact $^{87}\text{R}\text{b}$ atomic source for high precision dual atom interferometers. The source is based on a double-stage magneto-optical trap (MOT) design, consisting of a two-dimensional (2D) -MOT for efficient loading of a 3D-MOT. The accumulated atoms are precisely launched in a horizontal moving molasses. Our source generates a high atomic flux $(>{10}^{10}\text{ }\text{atoms}∕\text{s})$ with precise and flexibly tunable atomic trajectories as required for high resolution Sagnac atom interferometry. We characterize the performance of the source with respect to the relevant parameters of the launched atoms, i.e., temperature, absolute velocity, and pointing, by utilizing time-of-flight techniques and velocity selective Raman transitions.

DOI
10.1103/physreva.76.063611

Related papers

Three-Dimensional Cooling of an Atom-Beam Source for High-Contrast Atom Interferometry

Jonathan M. Kwolek, Charles Fancher, Mark Bashkansky +1 more

We present a compact, two-stage atomic beam source that produces a continuous, narrow, collimated, and high-flux beam of rubidium atoms with sub-Doppler temperatures in three dimensions, which features very low emission of near-resonance fluorescence along the atomic trajectory. The atom-beam source originates in a pushed two-dimensional magneto-optical trap ($2{\mathrm{D}}^{+}$ MOT) feeding a slightly off-axis three-dimensional moving optical-molasses stage that continuously cools and redirects the atom beam. The capture velocity of the moving optical molasses is deliberately chosen to be low, approximately $3\phantom{\rule{0.2em}{0ex}}\mathrm{m}/\mathrm{s}$, to reduce fluorescence, and the cooling light is detuned by several atomic linewidths from resonance to reduce the absorption cross section of cooling-induced fluorescence. Near-resonance light from the $2{\mathrm{D}}^{+}$ MOT and the push beam does not propagate to the output atomic trajectory due to a ${10}^{\ensuremath{\circ}}$ bend in the atomic trajectory. The atomic beam emitted from the two-stage source has a flux up to $1.6(3)\ifmmode\times\else\texttimes\fi{}{10}^{9}\phantom{\rule{0.2em}{0ex}}\mathrm{atoms}/\mathrm{s}$, with an optimized temperature of $15.0(2)\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}$. We employ continuous Raman-Ramsey interference measurements at the atom-beam output to study the sources of decoherence in the presence of continuous cooling, and demonstrate that the atom-beam source effectively preserves high fringe contrast even during cooling. This cold-atom-beam source is appropriate for use in atom interferometers and clocks, where continuous operation eliminates dead time, the slow atom-beam velocity (6--16 m/s) improves sensitivity, the narrow 3D velocity distribution improves fringe contrast, and the low reabsorption of scattered light mitigates decoherence caused by the continuous cooling process.

arXiv:2004.01057•Physical Review Applied•Apr 22, 2020•28 citations

A novel simplified two-dimensional magneto-optical trap as an intense source of slow cesium atoms

N. Castagna, Jocelyne Guéna, Mark D. Plimmer +1 more

We describe the design and performance of a slow atom source based on a 2D magneto-optical trap (MOT) that uses an innovative simple optical configuration. Metal-coated retro-reflecting prisms replace mirrors and quarter-wave plates so the optical power of the cooling laser beam is recycled. This source has been characterised for three different configurations: with and without transverse magnetic field gradient, and with a pusher beam to obtain a 2D+-MOT. The longitudinal velocity is of the order of 25 m·s−1, with a transverse velocity spread ≤1 m·s−1, while the typical atomic flux density obtained is up to 1.3×1014 at ·s−1·m−2 for a cesium vapour pressure of ~4×10−8 mbar in the source. We use this slow atom beam, instead of cesium vapour, to load a 3D moving optical molasses that feeds a continuous cold atom fountain. We obtain a gain of a factor ~20 in the atomic flux launched by the fountain.

The European Physical Journal Applied Physics•Apr 1, 2006•23 citations

Dual atomic interferometry for differential inertial sensing

Jianing Li

The utilization of light-pulse atom interferometry presents a valuable technique that has found application in both fundamental scientific inquiries, such as investigating constants such as measurements of fine structure constant α and gravitational constant G, and practical endeavors including acceleration sensing and rotation measurements. This thesis delves into our implementation of a dual atom interferometer design involving the clock transition 1S0 → 3P0 in strontium, concurrently conducting the interferometric sequence on atoms in both ground and excited states. To facilitate the dual atom interferometer’s operation, we have firstly established a compact experimental setup with a transversely loaded bi-dimensional magneto-optical-trap (2D-MOT) to create a high flux source of cold strontium atoms. Introducing a novel cross-polarized bi-color atomic beam slower, we simultaneously addresses two excited Zeeman substates of the transition 1S0 → 1P1 in strontium-88, significantly enhancing the number of atoms prepared in the 461 nm MOT by around 10-fold. Following the 461 nm MOT, the atomic ensemble undergoes cooling in a 689 nm MOT, achieving atomic temperatures below 1 µK. We also install a network of eight magnetic field probes arranged around the cold atomic sample, enabling precise three-axis active control of magnetic fields down to the milligauss level. With the atoms confined in a 2D lattice at the magic-wavelength of 813.427 nm after the initial preparation phase, we conduct the magnetically-induced clock transition to create a statistical mixture state of ground and excited states. After a velocity selection stage, implementing a Mach-Zehnder interferometer with Bragg pulses operating at the magic-wavelength along the vertical axis, we conduct tests of the weak equivalence principle (WEP). The Eötvös ratio we found in our system stood at (1.8 ± 3.1) × 10−4, mainly limited by the finite temperature of the atomic cloud constraining the interrogation time. Furthermore, the dual atom interferometer scheme enables the measurement of state-dependent force and eventually polarizability difference via the phase shift between the atoms in different states, and we experimentally demonstrate this by introducing an additional light field gradient.

•Jan 1, 2023•0 citations

An intense 87Rb cold atomic source for atom interferometry

Li Yingying, Xiong Jijun, Zhikun Jiang

We present the implementation and characterization of a slow, intense, and collimated rubidium atomic source for atom interferometry. The continuous87Rb cold atomic beam is produced by a new compact two-dimensional magneto-optical trap. And it is based on the 2D+MOT design but a much smaller size and a higher flux compared to our original LVIS system. The on-line detecting system developed over a combination of time-of-flight and fluorescence methods is used to optimize the beam parameters. The dependence of the beam flux on detuning and power are investigated in detail respectively, for cooling and pushing laser. The re-pumping laser power influence is also considered. With aError! Reference source not found.10 G/cm magnetic gradient, 3ΓError! Reference source not found. red detuning from resonance for cooling laser and 5ΓError! Reference source not found. red detuning for pushing laser, the obtained cold atomic beam has a high flux of 4.7×109atoms/s Error! Reference source not found. Error! Reference source not found. It has a narrow longitudinal velocity distribution with mean velocity 10 m/s and full width at half maximum (FWHM)Error! Reference source not found.2 m/sError! Reference source not found. The two-photo stimulated Raman transitions both in Doppler-free and Doppler-sensitive modes are first proceeded, and stable Raman-Ramsey fringes are achieved with twon/2 Error! Reference source not found. Raman pulses.

International Conference on Optoelectronics and Microelectronics•Jul 1, 2015•0 citations

Compact continuous cold atomic beam from a single cell with three-dimensional cooling and ultralow light shift

Shengzhe Wang, Qian-Lan Cai, Zhixin Meng +2 more

We report a compact single-cell source of a continuous cold-atom beam with three-dimensional (3D) cooling. By integrating an off-axis moving optical molasses (OM) with a two-dimensional magneto-optical trap (MOT), we achieve simultaneous 3D cooling within a 50 mm interaction region. The source delivers a continuous flux up to 4.9(5)x10^9 atoms/s, with a transverse temperature of 94(5) microK, a longitudinal temperature as low as 231(65) microK, and a tunable mean velocity between 5 and 20 m/s. Custom in-vacuum mirrors integrate the reflective geometry for the off-axis OM beams with a 0.8 mm output aperture, ensuring stable alignment while suppressing stray light and fluorescence leakage. Ultra-low light shift and decoherence are verified via continuous Raman-Ramsey interferometry, yielding a light shift of -0.51(4)Hz and a typical fringe contrast of 90.85(30)% at a Raman separation of 100 mm (interrogation time of 8.70 ms). This compact continuous cold-atom beam source constitutes a practical building block for atomic-beam clocks and interferometers, enabling reduced aliasing noise together with improved sensitivity and accuracy for field applications.

arXiv:2510.13126•Physical Review Applied•Mar 16, 2026•0 citations

Direct comparison between a two-dimensional magneto-optical trap and a Zeeman slower as sources of cold sodium atoms

Edwin Pedrozo-Peñafiel, Franklin J. Vivanco, P. C. M. Castilho +3 more

Abstract The atom source is a relevant component in many atomic molecular optics experiments. The compactness and efficiency of the source are fundamental issues, acquiring more importance as the complexity of the experiments increases. Characterizing new techniques to produce high atom flux is necessary to know the efficiency and peculiarities of each one. This allows choosing the most suitable source for a specific experiment. In this work, we show a direct comparison between a two-dimensional magneto-optical trap (2D-MOT) and a Zeeman slower (ZS) as source of cold sodium atoms to load a standard three-dimensional magneto-optical trap. The optimum parameters for each case are obtained by observing the loading rate and the final number of atoms in the 3D-MOT. We conclude that the 2D-MOT provides a high flux of atoms comparable with that produced by the ZS, but with an enormous advantage with respect to the size of the apparatus.

Laser Physics Letters•May 12, 2016•12 citations
We present a compact 87Rb^{87}\text{R}\text{b}87Rb atomic source for high precision dual atom interferometers. The source is based on a double-stage magneto-optical trap (MOT) design, consisting of a two-dimensional (2D) -MOT for efficient loading of a 3D-MOT. The accumulated atoms are precisely launched in a horizontal moving molasses. Our source generates a high atomic flux (>1010 atoms∕s)(>{10}^{10}\text{ }\text{atoms}∕\text{s})(>1010 atoms∕s) with precise and flexibly tunable atomic trajectories as required for high resolution Sagnac atom interferometry. We characterize the performance of the source with respect to the relevant parameters of the launched atoms, i.e., temperature, absolute velocity, and pointing, by utilizing time-of-flight techniques and velocity selective Raman transitions.
We present a compact, two-stage atomic beam source that produces a continuous, narrow, collimated, and high-flux beam of rubidium atoms with sub-Doppler temperatures in three dimensions, which features very low emission of near-resonance fluorescence along the atomic trajectory. The atom-beam source originates in a pushed two-dimensional magneto-optical trap (2D+2{\mathrm{D}}^{+}2D+ MOT) feeding a slightly off-axis three-dimensional moving optical-molasses stage that continuously cools and redirects the atom beam. The capture velocity of the moving optical molasses is deliberately chosen to be low, approximately 3m/s3\phantom{\rule{0.2em}{0ex}}\mathrm{m}/\mathrm{s}3m/s, to reduce fluorescence, and the cooling light is detuned by several atomic linewidths from resonance to reduce the absorption cross section of cooling-induced fluorescence. Near-resonance light from the 2D+2{\mathrm{D}}^{+}2D+ MOT and the push beam does not propagate to the output atomic trajectory due to a ${10}^{\ensuremath{\circ}}$ bend in the atomic trajectory. The atomic beam emitted from the two-stage source has a flux up to $1.6(3)\ifmmode\times\else\texttimes\fi{}{10}^{9}\phantom{\rule{0.2em}{0ex}}\mathrm{atoms}/\mathrm{s}$, with an optimized temperature of $15.0(2)\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}$. We employ continuous Raman-Ramsey interference measurements at the atom-beam output to study the sources of decoherence in the presence of continuous cooling, and demonstrate that the atom-beam source effectively preserves high fringe contrast even during cooling. This cold-atom-beam source is appropriate for use in atom interferometers and clocks, where continuous operation eliminates dead time, the slow atom-beam velocity (6--16 m/s) improves sensitivity, the narrow 3D velocity distribution improves fringe contrast, and the low reabsorption of scattered light mitigates decoherence caused by the continuous cooling process.
We describe the design and performance of a slow atom source based on a 2D magneto-optical trap (MOT) that uses an innovative simple optical configuration. Metal-coated retro-reflecting prisms replace mirrors and quarter-wave plates so the optical power of the cooling laser beam is recycled. This source has been characterised for three different configurations: with and without transverse magnetic field gradient, and with a pusher beam to obtain a 2D+-MOT. The longitudinal velocity is of the order of 25 m·s−1, with a transverse velocity spread ≤1 m·s−1, while the typical atomic flux density obtained is up to 1.3×1014 at ·s−1·m−2 for a cesium vapour pressure of ~4×10−8 mbar in the source. We use this slow atom beam, instead of cesium vapour, to load a 3D moving optical molasses that feeds a continuous cold atom fountain. We obtain a gain of a factor ~20 in the atomic flux launched by the fountain.
The utilization of light-pulse atom interferometry presents a valuable technique that has found application in both fundamental scientific inquiries, such as investigating constants such as measurements of fine structure constant α and gravitational constant G, and practical endeavors including acceleration sensing and rotation measurements. This thesis delves into our implementation of a dual atom interferometer design involving the clock transition 1S0 → 3P0 in strontium, concurrently conducting the interferometric sequence on atoms in both ground and excited states. To facilitate the dual atom interferometer’s operation, we have firstly established a compact experimental setup with a transversely loaded bi-dimensional magneto-optical-trap (2D-MOT) to create a high flux source of cold strontium atoms. Introducing a novel cross-polarized bi-color atomic beam slower, we simultaneously addresses two excited Zeeman substates of the transition 1S0 → 1P1 in strontium-88, significantly enhancing the number of atoms prepared in the 461 nm MOT by around 10-fold. Following the 461 nm MOT, the atomic ensemble undergoes cooling in a 689 nm MOT, achieving atomic temperatures below 1 µK. We also install a network of eight magnetic field probes arranged around the cold atomic sample, enabling precise three-axis active control of magnetic fields down to the milligauss level. With the atoms confined in a 2D lattice at the magic-wavelength of 813.427 nm after the initial preparation phase, we conduct the magnetically-induced clock transition to create a statistical mixture state of ground and excited states. After a velocity selection stage, implementing a Mach-Zehnder interferometer with Bragg pulses operating at the magic-wavelength along the vertical axis, we conduct tests of the weak equivalence principle (WEP). The Eötvös ratio we found in our system stood at (1.8 ± 3.1) × 10−4, mainly limited by the finite temperature of the atomic cloud constraining the interrogation time. Furthermore, the dual atom interferometer scheme enables the measurement of state-dependent force and eventually polarizability difference via the phase shift between the atoms in different states, and we experimentally demonstrate this by introducing an additional light field gradient.
We present the implementation and characterization of a slow, intense, and collimated rubidium atomic source for atom interferometry. The continuous87Rb cold atomic beam is produced by a new compact two-dimensional magneto-optical trap. And it is based on the 2D+MOT design but a much smaller size and a higher flux compared to our original LVIS system. The on-line detecting system developed over a combination of time-of-flight and fluorescence methods is used to optimize the beam parameters. The dependence of the beam flux on detuning and power are investigated in detail respectively, for cooling and pushing laser. The re-pumping laser power influence is also considered. With aError! Reference source not found.10 G/cm magnetic gradient, 3ΓError! Reference source not found. red detuning from resonance for cooling laser and 5ΓError! Reference source not found. red detuning for pushing laser, the obtained cold atomic beam has a high flux of 4.7×109atoms/s Error! Reference source not found. Error! Reference source not found. It has a narrow longitudinal velocity distribution with mean velocity 10 m/s and full width at half maximum (FWHM)Error! Reference source not found.2 m/sError! Reference source not found. The two-photo stimulated Raman transitions both in Doppler-free and Doppler-sensitive modes are first proceeded, and stable Raman-Ramsey fringes are achieved with twon/2 Error! Reference source not found. Raman pulses.
We report a compact single-cell source of a continuous cold-atom beam with three-dimensional (3D) cooling. By integrating an off-axis moving optical molasses (OM) with a two-dimensional magneto-optical trap (MOT), we achieve simultaneous 3D cooling within a 50 mm interaction region. The source delivers a continuous flux up to 4.9(5)x10^9 atoms/s, with a transverse temperature of 94(5) microK, a longitudinal temperature as low as 231(65) microK, and a tunable mean velocity between 5 and 20 m/s. Custom in-vacuum mirrors integrate the reflective geometry for the off-axis OM beams with a 0.8 mm output aperture, ensuring stable alignment while suppressing stray light and fluorescence leakage. Ultra-low light shift and decoherence are verified via continuous Raman-Ramsey interferometry, yielding a light shift of -0.51(4)Hz and a typical fringe contrast of 90.85(30)% at a Raman separation of 100 mm (interrogation time of 8.70 ms). This compact continuous cold-atom beam source constitutes a practical building block for atomic-beam clocks and interferometers, enabling reduced aliasing noise together with improved sensitivity and accuracy for field applications.
Abstract The atom source is a relevant component in many atomic molecular optics experiments. The compactness and efficiency of the source are fundamental issues, acquiring more importance as the complexity of the experiments increases. Characterizing new techniques to produce high atom flux is necessary to know the efficiency and peculiarities of each one. This allows choosing the most suitable source for a specific experiment. In this work, we show a direct comparison between a two-dimensional magneto-optical trap (2D-MOT) and a Zeeman slower (ZS) as source of cold sodium atoms to load a standard three-dimensional magneto-optical trap. The optimum parameters for each case are obtained by observing the loading rate and the final number of atoms in the 3D-MOT. We conclude that the 2D-MOT provides a high flux of atoms comparable with that produced by the ZS, but with an enormous advantage with respect to the size of the apparatus.