Introduction Usage has reserved the expression optical bistability mostly for coherently driven passive systems. An atomic system is called passive when there is no population inversion. This is the case, for example, of a system at thermal equilibrium. On the contrary, the laser that we have described in Chapter 1 is a driven active system, because a population inversion is created. The laser equations we have studied so far describe an incoherently driven laser. However, nothing prevents driving a lasing cavity with a coherent field emitted by another laser. This is realized in a whole class of lasers that are used mainly as frequency converters. In optical bistability (OB), the driving field is usually a coherent field. Thus we have to account for two differences between the laser and the optically bistable system: (1) In OB, there is no inversion of population: 〈| A 2 |〉>〈| B 2 |〉, in the notation of Chapter 1. Hence, in the absence of interaction with a field, the population difference D relaxes toward a negative value. (2) The pumping is coherent, meaning that an external laser field is added to the cavity field. Using the single-mode equations (1.48)–(1.50), we have to change the sign of D and D a (which amounts to keeping D defined in (1.34) as it is but changing P into – P and A into – A ) and to add a source term in the equation for the complex field amplitude.
Introduction Usage has reserved the expression optical bistability mostly for coherently driven passive systems. An atomic system is called passive when there is no population inversion. This is the case, for example, of a system at thermal equilibrium. On the contrary, the laser that we have described in Chapter 1 is a driven active system, because a population inversion is created. The laser equations we have studied so far describe an incoherently driven laser. However, nothing prevents driving a lasing cavity with a coherent field emitted by another laser. This is realized in a whole class of lasers that are used mainly as frequency converters. In optical bistability (OB), the driving field is usually a coherent field. Thus we have to account for two differences between the laser and the optically bistable system: (1) In OB, there is no inversion of population: 〈| A 2 |〉>〈| B 2 |〉, in the notation of Chapter 1. Hence, in the absence of interaction with a field, the population difference D relaxes toward a negative value. (2) The pumping is coherent, meaning that an external laser field is added to the cavity field. Using the single-mode equations (1.48)–(1.50), we have to change the sign of D and D a (which amounts to keeping D defined in (1.34) as it is but changing P into – P and A into – A ) and to add a source term in the equation for the complex field amplitude.
In Chapter 9 we discussed the case of a nonlinear cavity containing an active medium. In this framework, the outstanding phenomenon which arises is laser emission, and we calculated the stationary solutions for the ring laser. In this chapter, instead, we turn our attention to the passive nonlinear cavity and in this framework the outstanding phenomenon is optical bistability , i.e. the existence of two distinct stable stationary states that coexist for the same fixed values of the parameters in play. This phenomenon can arise also in the case of an active system contained in a cavity, as we have already noted in Section 9.1 and as we will discuss further in connection with the laser with injected signal, but it became popular from the studies of nonlinear passive optical cavities in the 1970s and 1980s. In contrast to the laser case, in the passive configuration we use an input coherent field, which is injected into the cavity. We discussed this case in Chapter 8 and derived a general equation for the transmission of the cavity (Eq. (8.23)), which we used for an empty cavity and for a linear cavity in Sections 8.4 and 8.5, respectively. In this chapter we will discuss the full nonlinear configuration. It is customary to identify two extreme cases of optical bistability called absorptive optical bistability and dispersive or refractive optical bistability . In both cases an essential ingredient to obtain the bistable behavior is the feedback action exerted by the mirrors of the cavity. In the purely absorptive configuration, in which there is exact resonance among the frequencies of the input field, of the atoms and of the cavity, the other essential ingredient is the saturable nonlinearity of the absorption. In the dispersive case, instead, the main feature is the nonlinearity of the refractive index. These two cases will be illustrated in Sections 11.1 and 11.2, respectively, both “exactly” and in the low-transmission limit.
Introduction Lasers are part of a large class of non-linear systems which covers a great deal of scientific domains, including physics, chemistry, biology, sociology, etc. All these non-linear systems have common properties and present universal features which become more and more extensive as new studies are performed. In recent years, the interest in these non-linear systems has considerably increased. In particular, it is now well established that the role of fluctuations in non-equilibrium systems is far more relevant than in systems at thermodynamical equilibrium, and the study of their influence on stationary and transient states has become very important. Among the different aspects presented by the non-linearity in lasers, two of them will be particularly studied here: (i) The first one is the optical bistability (OB). An optical system is bistable if it has two output states I for the same value of the excitation A over some range of excitation values (see Gibbs, 1985, for a recent review). A typical response curve of such a system is given in Figure 5.1. Here, the system is defined as bistable between A ↓ and A ↑ , where the effectively occupied state depends on the history of the input parameter (see the caption to Figure 5.1). If OB is a common phenomenon in different fields, the OB transient phenomena have far more general features.
This chapter concludes the discussion about temporal instabilities and self-oscillations, considering the instabilities that arise in the systems analyzed in Chapter 13, with the exception of optical bistability, which has been discussed separately in Chapter 11. Section 25.1 focuses on the laser with an injected signal. As already mentioned in Section 13.1, in this system self-pulsing instabilities are rather ubiquitous, and on exploring the parameter space one meets an extremely rich variety of oscillatory behaviors. For example, under extremely high-gain conditions, breathing, spiking and chaos have been identified over various ranges of the driving field strength [294]. In this section we show some results that arise under parametric conditions that are more accessible experimentally. We illustrate especially the coexistence, for the same parametric values, of different oscillatory behaviors that are reached by starting from different initial conditions. On the other hand, Section 25.2 deals with a laser with a saturable absorber. In this system even the full scenario of stationary intensity solutions in the single-mode model is very complex. For the sake of simplicity, in this section we focus on a simpler rate-equation model that is obtained from the single-mode model of Eqs. (13.13)–(13.17) by adiabatically eliminating the atomic polarization of both active and passive medium. As in Chapter 13, we assume that the atomic transition frequencies are equal and also coincide with a cavity frequency. In this way all the variables in the model can be assumed real, and the linearization around the stationary solution described in Section 13.2 leads to a cubic eigenvalue equation. The spontaneous oscillations which arise from this instability are called repetitive passive Q-switching in the literature. Section 25.3 considers the stability of the stationary solutions of the degenerate optical parametric oscillator described in Section 13.4 and outlines the scenario of period doubling and chaos that arises under appropriate parametric conditions.
POPULATION RATE EQUATIONS From the discussion in the preceding chapter, it is clear that population inversion is the basic condition for an optical gain. For any system in its normal state in thermal equilibrium, a low-energy level is always more populated than a high-energy level, hence there is no population inversion. Population inversion in a system can only be accomplished through a process called pumping by actively exciting the atoms in a low-energy level to a high-energy level. If left alone, the atoms in a system relax to thermal equilibrium. Therefore, population inversion is a nonequilibrium state that cannot be sustained without active pumping. To keep a constant optical gain, continuous pumping is required to maintain population inversion. This condition is clearly consistent with the law of conservation of energy: amplification of an optical wave leads to an increase in optical energy, which is possible only if the required energy is supplied by a source. Pumping is the process that supplies energy to the gain medium for the amplification of an optical wave. There are many different pumping techniques, including optical excitation, electric current injection, electric discharge, chemical reaction, and excitation with particle beams. The use of a specific pumping technique depends on the properties of the gain medium being pumped. The lasers and optical amplifiers of particular interest in photonic systems are made of either dielectric solid-state media doped with active ions, such as Nd:YAG and Er:glass fiber, or direct-gap semiconductors, such as GaAs and InP. For a dielectric gain medium, the most commonly used pumping technique is optical pumping using either an incoherent light source, such as a flashlamp or a light-emitting diode, or a coherent light source from another laser. A semiconductor gain medium can also be optically pumped, but it is usually pumped by electric current injection. In this section, we consider the general conditions for pumping to achieve population inversion. Detailed pumping mechanisms and physical setups are not addressed here because they depend on the specific gain medium used in a particular application. The net rate of increase of the population density in a given energy level is described by a rate equation. As we shall see below, pumping for population inversion in any practical gain medium always requires the participation of more than two energy levels.
In the first section we discuss the stationary solutions for a laser with an injected signal, the active counterpart of the optical bistability analyzed in Chapter 11. Next, in Section 13.2 we consider another very interesting system, namely a laser with a saturable absorber, a free-running laser in which the optical cavity contains a passive medium in addition to the active medium. The single-mode model for this system can be constructed by combining the single-mode models for the free-running laser and for optical bistability. The discussion is then focussed on its stationary states. In Section 13.3 we return to the single-mode model for optical bistability and, by introducing an appropriate “cubic limit” on the parameters in play, we derive a cubic model for dispersive optical bistability with two-level atoms. The stationary equation for such a model formally coincides with that derived and discussed for a Kerr medium in Section 11.2. In the last section we start from the equations for a quadratic nonlinear medium in the degenerate configuration derived in Chapter 6 and combine them with the appropriate boundary conditions for the two field envelopes in play, assuming that the quadratic medium is contained in a ring cavity as happens in an optical parametric oscillator or in second-harmonic generation in a cavity. Next, by introducing the low-transmission limit and the single-mode limit we derive a two-mode model that describes the dynamics of a degenerate optical parametric oscillator or of second-harmonic generation in a cavity. Finally, for the case of a parametric oscillator we illustrate extensively the stationary solutions of the equations. A laser with an injected signal From a technical point of view, this system is interesting because of the possibility of stabilizing the frequency and the phase of separate lasers by taking advantage of the known affinity of nonlinear oscillators to lock onto a periodic forcing element. In 1972 Spencer and Lamb [125] predicted the possibility of bistable behavior in a laser with an injected signal before the surge of interest in optical bistability in the passive configuration.