Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Towards an optical lattice clock based on neutral mercury

C. Mandache, Petersen, Michael, Daniel Varela Magalhães, O. Acef, André Clairon, S. Bize

Published Jan 1, 2008• 0 citations
OpenAlex

Abstract

We are investigating the possibilities of using neutral mercury as a new species to realize a highly accurate atomic clock using the non-perturbing dipole lattice trapping scheme. Typically, accuracy below 10-17 is targeted, which would make neutral mercury an interesting candidate for a redefinition of the SI second. This paper presents our on-going work towards the realization of an optical lattice clock using neutral mercury. We will describe a 254 nm laser source delivering several hundreds of milliWatts at this wavelength with a suitably low frequency noise for laser cooling and magneto-optic trapping. We will describe our vacuum system for magneto-optic trap and report on the status of our work regarding magneto-optic trapping of mercury. We will also describe our clock laser at 266 nm.

Related papers

Towards an Optical Lattice Clock Based on Neutral Mercury

Michael Petersen, Daniel Varela Magalhães, C. Mandache +2 more

We are investigating the possibilities of using neutral mercury as a new species to realize a highly accurate atomic clock using the non-perturbing dipole lattice trapping scheme. Typically, accuracy below 10-17is targeted. This proceeding outlines some properties of neutral mercury which are relevant to an optical lattice clock. We also present our on-going work towards the realization of the mercury optical lattice clock. Design considerations are made about the main subsystems. Recent work on these subsystems is described.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2007•2 citations

Recent progress of neutral mercury lattice clock in SIOM

R C Zhao, Xiaoyan Fu, K K Liu +4 more

Neutral mercury atom is one of good candidates of optical lattice clock. Due to its large atomic number, mercury atom is insensitive to black body radiation, which is the severe limitation for the development of optical clocks. However, the challenge of neutral mercury lattice clock is the requirement of high power deep-UV lasers, especially for both the cooling laser and the lattice laser. Here, we report the recent progress of neutral mercury lattice clock in SIOM, including the development for laser cooling of mercury atom and the cooling laser system with fiber laser amplifier. We have realized the magneto-optical trap of mercury atoms and measured the parameters of cold mercury atoms. A home-made external cavity diode laser works as a seed laser for a room temperature 1014.8 nm fiber laser amplifier. A new efficient frequency-doubling cavity from 1015 nm to 507 nm has been developed.

Journal of Physics Conference Series•Jun 1, 2016•0 citations

Recent Progress of Mercury Lattice Clock in SIOM

Qixin Liu, Ye Zhang, Zexin Yu +2 more

To realize a neutral mercury lattice clock, an experimental setup is in developing in SIOM. With two stable cooling lasers and a new vacuum system, an enhanced cold mercury atom source is implemented based on a two-dimensional magneto-optical trap (2D-MOT). By applying a hybrid frequency stabilization method and optimization of the 2D-MOT, about 1.3×106cold mercury atoms are obtained with a loading rate of 1.0×106atoms/s. And a high power injection-locked Ti:sapphire laser at 725 nm is developed for optical lattice at magic-wavelength.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 24, 2022•0 citations

Recent progress of neutral mercury lattice clock in SIOM

X H Fu, S Fang, R C Zhao +3 more

The optical lattice clock develops fast in recent years, and its stability and accuracy has already surpassed the microwave fountain clock and the optical clock based on ion trap. The mercury (Hg) lattice clock has the possibility to make a breakthrough in the limitation of blackbody radiation shift for strontium (Sr) and ytterbium (Yb) lattice clock, and reach the uncertainty in E-18 level at room temperature. For the purposes of laser cooling of mercury atoms and interrogating of the clock transition from1S0state to3P0state, a high-power cooling laser at 253.7 nm and an ultra-stable Hz-level linewidth laser at 265.6 nm are required, respectively. Here, we report our development of these laser sources for a neutral Hg lattice clock.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 1, 2017•0 citations

Toward a mercury optical lattice clock: Development of a dipole lattice trap at the magic wavelength

John J. McFerran, Sinda Mejri, L. Yi +1 more

We describe our work to develop an optical lattice clock using neutral mercury, which has the potential to reach accuracy near 1 part in 1018owing to its low sensitivity to black body radiation. We describe developments of our experimental setup to allow dipole lattice trapping and spectroscopy in the Lamb-Dicke regime. Specifically, we report on the implementation of a low noise imaging and detection system, on the characterization of the magneto-optic trap from which the dipole trap will be loaded, on the implementation of the dipole lattice trap itself, a challenging task given the wavelength and power requirements.

•Jun 1, 2010•0 citations

A Single Folded Beam Magneto-Optical Trap System for Neutral Mercury Atoms

Kangkang Liu, Ru-Chen Zhao, Wei Gou +6 more

Mercury is a promising candidate for the optical lattice clock, due to its low sensitivity to the blackbody radiation. We develop a single folded beam magneto-optical trap for the neutral mercury optical lattice clock, with a 253.7nm frequency quadrupled laser. Up to 1.7 × 10 6 ( 202 Hg) or 1.5 × 10 6 ( 199 Hg) atoms can be captured, and the atom temperature is lowered to 170 μK ( 202 Hg) or 50 μK ( 199 Hg). The cold atom signals of all six rich abundant isotopes are observed in this system.

Chinese Physics Letters•Jul 1, 2016•12 citations
We are investigating the possibilities of using neutral mercury as a new species to realize a highly accurate atomic clock using the non-perturbing dipole lattice trapping scheme. Typically, accuracy below 10-17 is targeted, which would make neutral mercury an interesting candidate for a redefinition of the SI second. This paper presents our on-going work towards the realization of an optical lattice clock using neutral mercury. We will describe a 254 nm laser source delivering several hundreds of milliWatts at this wavelength with a suitably low frequency noise for laser cooling and magneto-optic trapping. We will describe our vacuum system for magneto-optic trap and report on the status of our work regarding magneto-optic trapping of mercury. We will also describe our clock laser at 266 nm.
We are investigating the possibilities of using neutral mercury as a new species to realize a highly accurate atomic clock using the non-perturbing dipole lattice trapping scheme. Typically, accuracy below 10-17is targeted. This proceeding outlines some properties of neutral mercury which are relevant to an optical lattice clock. We also present our on-going work towards the realization of the mercury optical lattice clock. Design considerations are made about the main subsystems. Recent work on these subsystems is described.
Neutral mercury atom is one of good candidates of optical lattice clock. Due to its large atomic number, mercury atom is insensitive to black body radiation, which is the severe limitation for the development of optical clocks. However, the challenge of neutral mercury lattice clock is the requirement of high power deep-UV lasers, especially for both the cooling laser and the lattice laser. Here, we report the recent progress of neutral mercury lattice clock in SIOM, including the development for laser cooling of mercury atom and the cooling laser system with fiber laser amplifier. We have realized the magneto-optical trap of mercury atoms and measured the parameters of cold mercury atoms. A home-made external cavity diode laser works as a seed laser for a room temperature 1014.8 nm fiber laser amplifier. A new efficient frequency-doubling cavity from 1015 nm to 507 nm has been developed.
To realize a neutral mercury lattice clock, an experimental setup is in developing in SIOM. With two stable cooling lasers and a new vacuum system, an enhanced cold mercury atom source is implemented based on a two-dimensional magneto-optical trap (2D-MOT). By applying a hybrid frequency stabilization method and optimization of the 2D-MOT, about 1.3×106cold mercury atoms are obtained with a loading rate of 1.0×106atoms/s. And a high power injection-locked Ti:sapphire laser at 725 nm is developed for optical lattice at magic-wavelength.
The optical lattice clock develops fast in recent years, and its stability and accuracy has already surpassed the microwave fountain clock and the optical clock based on ion trap. The mercury (Hg) lattice clock has the possibility to make a breakthrough in the limitation of blackbody radiation shift for strontium (Sr) and ytterbium (Yb) lattice clock, and reach the uncertainty in E-18 level at room temperature. For the purposes of laser cooling of mercury atoms and interrogating of the clock transition from1S0state to3P0state, a high-power cooling laser at 253.7 nm and an ultra-stable Hz-level linewidth laser at 265.6 nm are required, respectively. Here, we report our development of these laser sources for a neutral Hg lattice clock.
We describe our work to develop an optical lattice clock using neutral mercury, which has the potential to reach accuracy near 1 part in 1018owing to its low sensitivity to black body radiation. We describe developments of our experimental setup to allow dipole lattice trapping and spectroscopy in the Lamb-Dicke regime. Specifically, we report on the implementation of a low noise imaging and detection system, on the characterization of the magneto-optic trap from which the dipole trap will be loaded, on the implementation of the dipole lattice trap itself, a challenging task given the wavelength and power requirements.