Representing continuous values by streams of random binary bits, stochastic decoding has shown advantages in both hardware efficiency and fault tolerance, therefore has been widely adopted by iterative decoding of error correction codes such as low-density parity-check (LDPC) codes and so on. Recently, polar codes, the first codes that can provably achieve the capacity of symmetric binary-input discrete memoryless channels (B-DMCs), have drawn a lot of attentions from both academia and industry. Although, polar codes with list successive cancellation (SC) decoding can outperform several best-known LDPC codes even within high error-rate regions, the linearly increasing hardware complexity makes its efficient implementation difficult. To this end, the stochastic list SC polar decoding algorithm is proposed in this paper to provide a good tradeoff between performance and complexity. In order to increase the decoding performance of stochastic list SC polar decoder, doubling probability approach is presented. The corresponding hardware architecture is also given. The approximate doubling approach is employed to facilitate the efficient implementation. Implementation results have shown that the proposed stochastic list SC polar decoder can achieve a good trade-off between performance and complexity.
Representing continuous values by streams of random binary bits, stochastic decoding has shown advantages in both hardware efficiency and fault tolerance, therefore has been widely adopted by iterative decoding of error correction codes such as low-density parity-check (LDPC) codes and so on. Recently, polar codes, the first codes that can provably achieve the capacity of symmetric binary-input discrete memoryless channels (B-DMCs), have drawn a lot of attentions from both academia and industry. Although, polar codes with list successive cancellation (SC) decoding can outperform several best-known LDPC codes even within high error-rate regions, the linearly increasing hardware complexity makes its efficient implementation difficult. To this end, the stochastic list SC polar decoding algorithm is proposed in this paper to provide a good tradeoff between performance and complexity. In order to increase the decoding performance of stochastic list SC polar decoder, doubling probability approach is presented. The corresponding hardware architecture is also given. The approximate doubling approach is employed to facilitate the efficient implementation. Implementation results have shown that the proposed stochastic list SC polar decoder can achieve a good trade-off between performance and complexity.
Polar codes, as the first provable capacity-achieving error-correcting codes, have received much attention in recent years. However, the decoding performance of polar codes with traditional successive-cancellation (SC) algorithm cannot match that of the low-density parity-check or Turbo codes. Because SC list (SCL) decoding algorithm can significantly improve the error-correcting performance of polar codes, design of SCL decoders is important for polar codes to be deployed in practical applications. However, because the prior latency reduction approaches for SC decoders are not applicable for SCL decoders, these list decoders suffer from the long-latency bottleneck. In this paper, we propose a multibit-decision approach that can significantly reduce latency of SCL decoders. First, we present a reformulated SCL algorithm that can perform intermediate decoding of 2 b together. The proposed approach, referred as 2-bit reformulated SCL (2b-rSCL) algorithm, can reduce the latency of SCL decoder from (3n-2) to (2n-2) clock cycles without any performance loss. Then, we extend the idea of 2-b-decision to general case, and propose a general decoding scheme that can perform intermediate decoding of any 2Kbits simultaneously. This general approach, referred as 2K-bit reformulated SCL (2Kb-rSCL) algorithm, can reduce the overall decoding latency to as short as n/2K-2-2 cycles. Furthermore, on the basis of the proposed algorithms, very large-scale integration architectures for 2b-rSCL and 4b-rSCL decoders are synthesized. Compared with a prior SCL decoder, the proposed (1024, 512) 2b-rSCL and 4b-rSCL decoders can achieve 21% and 60% reduction in latency, 1.66 and 2.77 times increase in coded throughput with list size 2, and 2.11 and 3.23 times increase in coded throughput with list size 4, respectively.
Polar codes are a class of codes discovered recently, which are proved to have capacity-achieving performance. The hardware implementations of successive cancellation (SC) decoding and List SC decoding are increasing dramatically now. However, throughput of these hardware structures remain to be improved on the one hand. On the other hand, stochastic computation is now wildly used because it uses simple structures to implement complicated mathematical operations and thus improves the throughput. This paper extends the application of stochastic computation to the decoding of polar codes. A family of SC decoders based on stochastic computation are proposed, including decoders based on bipolar stochastic computation(BSC-SC), low bits stochastic computation(LBSC-SC) and improved stochastic computation(ISC-SC). These methods have high generality and improve the throughput over SC decoder while having 0.5dB loss in decoding performance. The proposed 32-bit ISC-SC decoder has a better decoding accuracy and improves throughput over BSC-SC. It also reduces the hardware cost and latency compared to LBSC-SC decoder.
As an improved version of successive cancellation (SC) polar decoder, an SC stack (SCS) decoder has been proposed for performance improvement. However, the existing SCS polar decoder suffers a lot from high time complexity at low signal-to-noise ratio (SNR) region and space complexity compared with the SC decoder. To this end, two improved decoders are proposed to reduce time and space complexity in both low and high SNR regions. The first one is the segmented cyclic redundancy check (CRC)-aided SCS (SCA-SCS) decoder, which is based on segmented parity checkers. The second one is the adaptive SCS (ASCS) decoder, which has the flexibility of stack depth and searching width. Furthermore, a channel condition estimator is proposed to select appropriate decision criteria for different SNR scenarios. Results have shown that for the polar code of length 1024 and rate 1/2, two improved SCS decoders can perform better than the traditional SCS decoder. The proposed SCA-SCS decoder and the ASCS decoder can achieve 10.8% and 11.42% time complexity reduction and 31.68% and 60.85% space complexity reduction on average over binary-input additive white Gaussian noise channels (BI-AWGNCs), respectively. Efficient parallel hardware architecture of the SCS polar decoder is first proposed and implemented with 90- and 65-nm technologies. Results have verified its advantages over the state of the art (SOA).
Polar codes have emerged as the most favorable channel codes for their unique capacity-achieving property. To date, numerous approaches for efficient decoding of polar codes have been reported. However, these prior efforts focused on design of polar decoders via deterministic computation, while the behavior of stochastic polar decoder, which can have potential advantages such as low complexity and strong error-resilience, has not been studied in existing literatures. This paper, for the first time, investigates polar decoding using stochastic logic. Specifically, the commonly-used successive cancellation (SC) algorithm is reformulated into the stochastic form. Several methods that can potentially improve decoding performance are discussed and analyzed. Simulation results show that a stochastic SC decoder can achieve similar error-correcting performance as its deterministic counterpart. This work can pave the way for future hardware design of stochastic polar codes decoders.
When the code length is finite, the successive cancellation list (SCL) decoding of polar codes shows as good error-correction performance as low-density parity-check codes and turbo codes and it will be used in high-speed communications. However, since the hardware complexity of the SCL increases linearly as the size of the list increases, it is difficult to use the high-complexity SCL decoding for devices with limited resource such as IoT devices. The successive cancellation flip (SCF) decoding algorithm has been proposed to solve the problem of high hardware complexity and to enhance the error-correction performance of successive cancellation decoding. However, the conventional SCF decoding has high computational complexity. In this paper, we propose the interleaver-aided successive cancellation flip (ISCF) decoding to reduce the computational complexity. The computational complexity of the ISCF decoding is less by at least 32% than the conventional SCF decoding for error frame at Eb/N0=3.5dB.
By adopting successive cancellation list decoding (SCL), polar codes demonstrate competitive error correction performance over LDPC and Turbo codes. However, SCL decoding suffers from high computational complexity and long decoding latency, especially when the list size is very large. Successive cancellation flip (SCF), as another decoding algorithm that can achieve high error correction performance, has a complexity that is close to that of successive cancellation (SC) decoding. With the observation that SCL and SCF decoding are similar at giving more chances to inspect possible codewords simultaneously or sequentially, a novel hybrid decoder is proposed in this paper, which essentially combines the ideas of SCF and SCL decoders. Moreover, in order to compensate for the degradation of performance caused by the reduction of path splitting and further reduce the decoding latency, the convolutional polar codes are adopted with a designed bit-flipping set. Simulation results demonstrate that the proposed decoder achieves the reduction of decoding latency while attaining better performance than conventional CRC-aided SCL decoder.