Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Packaging and Characterization of NbN Superconducting Nanowire Single Photon Detectors

Jean-Luc Orgiazzi

Published May 22, 2009• 0 citations
OpenAlex

Abstract

Superconducting nanowire single-photon detectors (SNSPDs) are nanodevices usually made from thin niobium nitride (NbN) films. Operated at liquid helium temperature, they can exhibit high detection efficiency with low dark-counts associated with a fast response time and a low timing jitter. Covering a broad detection range from ultraviolet to mid-infrared, SNSPDs are a very attractive alternative to silicon or gallium arsenide based semiconductor detectors for fiber based telecommunication when single-photon sensitivity and high counting rates are necessary. \nEfficient packaging and fiber coupling of a SNSPD is in itself a real challenge and is often a limiting factor in reaching high system quantum efficiency. Our approach makes use of a controlled expansion alloy which has been adequately heat treated to enhance its characteristics for cryogenic operation. This insures the integrity of the optical coupling at cryogenic temperatures while done at room temperature. It also provides a good attenuation for electromagnetic interference due to the high relative permeability of the nickel-iron alloy. The small form factor of this pigtailed optical fiber package makes it versatile and could be easily integrated with a commercial cryogen-free system or simply dipped into a standard helium transport Dewar. We report on our theoretical and experimental methodology to evaluate the optical coupling quality and present the optoelectronic characterization of two devices packaged in this way. Electrical simulation is studied to understand the speed limitation factor inherent to these devices and preliminary speed and jitter measurements are reported.

Related papers

Robust Packaging Technique and Characterization of Fiber-Pigtailed Superconducting NbN Nanowire Single Photon Detectors

Jean-Luc Orgiazzi, A. Hamed Majedi

Efficient packaging and fiber coupling of a superconducting niobium nitride nanowire single photon detector is in itself a real challenge and is often a limiting factor to reach a high system quantum efficiency. Our approach makes use of a controlled expansion alloy, Carpenter Invar 36, that has been adequately heat treated to enhance its characteristics for cryogenic operation. This insures the integrity of the optical coupling done at room temperature while providing a good attenuation for electromagnetic interference due to the high relative permeability of this nickel-iron alloy. The small form factor of this optical fiber pigtailed package makes it versatile and could be easily integrated with a commercial cryogen-free system or simply dipped into a standard helium transport Dewar. We report on our experimental methodology to evaluate the optical coupling quality and present the optoelectronic characterization of two devices packaged in this way.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•9 citations

Packaging and Characterization of a NbTiN Superconducting Nanowire for the Design of an Optimal Nanowire Meander Structure

Antonio Scotland

The Superconducting Nanowire single-photon detector (SNSPD) made with niobium-titanium nitride (NbTiN) thin films fabricated on oxidized silicon substrates are highly promising nanodevices. The SNSPD is an immensely capable infrared single photon detector. When cooled down with liquid helium the device exhibits high detection efficiency, low dark-counts in spite of fast response times, and low timing jitter. For good single-photon sensitivity at telecom wavelengths, picosecod timing resolutions (<100 ps), and high counting frequencies, the SNSPD is first choice compared to the alternatives like indium gallium arsenide avalanche diode detectors, silicon single photon avalanche diode detectors, and other superconducting single photon technology like, transition edge detectors. These SNSPD characteristics make it ideal for long distance quantum key distribution (QKD). \nAlthough the exploitation of the constructive interference that occurs at the SiO2/Si interface can boost detector efficiency, efficient packaging and fiber coupling is often a limiting factor in the overall system quantum efficiency (SQE). In an attempt to maximize SQE, we use a controlled expansion alloy for optimal performance at cryogenic temperatures. This nickel-iron alloy has a high relative permeability and, therefore, attenuates electromagnetic interference. Our report focuses on the theoretical and experimental methods used in the characterization of an un-patterned NbTiN superconducting nanowire. We use simulations based on the gathered experimental data to design an optimal SNSPD meander and calculate its expected SQE. We also use simulations to analyze the speed and value added to secure key rates in long distance QKD schemes up to 400 km with down-conversion sources with positively spectrally correlated and decorrelated photon pairs at 1550 nm wavelength.

•Apr 23, 2013•0 citations

Development of practical superconducting nanowire single photon detector system with high detection efficiency

Shigehito Miki, Taro Yamashita, Hirotaka Terai +3 more

We have developed a practical superconducting nanowire single photon detector (SNSPD) system with our superconducting thin films and devices fabrication, optical coupling packaging, and cryogenic technology. The SNSPD devices were fabricated from high-quality niobium nitride (NbN) ultra-thin films that were epitaxially grown on single-crystal MgO substrates, and optical cavity structure were applied for improvement of photo absorption efficiency. The SNSPD system was developed based on a compact Gifford-McMahon (GM) cryocooler, in which SNSPD can operate continuously at temperature of 2.9 K +/- 10 mK with low power consumption without any liquid cryogens. The system detection efficiencies at 1550 nm wavelength (at a 100 Hz dark count rate) were found to be 2.6% for device without optical cavity and 21% for device with optical cavity. The response speed of devices showed maximally 200 MHz with 5 × 5 mm square device, and timing jitter of 100 ps full width at a half maximum (FWHM) was observed.

IEEE International Conference on Space Optical Systems and Applications (ICSOS)•May 1, 2011•0 citations

Superconducting nanowire materials for mid infrared single photon detection (Conference Presentation)

D. Morozov, Archan Banerjee, Kleanthis Erotokritou +5 more

Superconducting nanowire single photon detectors (SNSPD) offer excellent performance for infrared single photon detection, combining high efficiency, low timing jitter, low dark count rates and high photon counting rates. Promising application areas for SNSPDs include quantum key distribution, space-to-ground communications and single photon remote sensing [1]. SNSPDs are typically made with ultrathin niobium nitride (NbN) films with thickness 4 nm and a superconducting transition temperature above 9 K. NbN offers high performance in the near infrared but their sensitivity drops at wavelengths beyond 2 um. There is growing interest in potential photon counting applications in the mid infrared domain (for example remote sensing of greenhouse gases in the atmosphere [2]). One way to overcome the wavelength limit in NbN SNSPDs is to use films with a lower superconducting energy gap [3]. Here we report on the study of SNSPDs fabricated with thin films of titanium nitride (TiN). We compare TiN films deposited by atomic layer deposition (ALD) and by magnetron sputtering. The TiN films range in thickness from 5 to 60 nm, with superconducting transition temperatures from ~1 K to 3.5 K. We have analyzed the films via transmission electron microscopy and variable angle spectroscopic ellipsometry. We characterize TiN SNSPDs performance from near to mid-infrared at wavelengths (1-4 um) with fast optical parametric oscillator (OPO) source. We compare the performance of TiN SNSPDs to devices based on other lower gap materials: MoSi, NbTiN, WSi. [1] Natarajan et al Superconductor Science and Technology 25 063001 (2012) [2] Abshire et al Laser Applications to Chemical, Security and Environmental Analysis, (Optical Society of America, 2008) paper LMA4 [3] Verma et al Applied Physics Letters 105 022602 (2014)

Advanced Photon Counting Techniques•May 14, 2018•3 citations

Superconducting Nanowire Single-Photon Detectors for Quantum Information and Communications

Zhen Wang, Shigehito Miki, Mikio Fujiwara

Superconducting nanowire single-photon detectors (SNSPDs or SSPD) are highly promising devices in the growing field of quantum information and communications technology. We have developed a practical SSPD system with our superconducting thin films and devices fabrication, optical coupling packaging, and cryogenic technology. The SSPD system consists of six-channel SSPD devices and a compact Gifford-McMahon (GM) cryocooler, and can operate continuously on 100 V ac power without the need for any cryogens. The SSPD devices were fabricated from high-quality niobium nitride (NbN) ultrathin films that were epitaxially grown on single-crystal MgO substrates. The packaged SSPD devices were temperature stabilized to 2.96 K ± 10 mK. The system detection efficiency for an SSPD device with an area of 20 × 20 ¿m2was found to be 2.6% and 4.5% at wavelengths of 1550 and 1310 nm, respectively, at a dark count rate of 100 Hz, and a jitter of 100 ps full-width at half maximum. We also performed ultrafast BB84 quantum key distribution (QKD) field testing and entanglement-based QKD experiments using these SSPD devices.

arXiv:1003.0227•IEEE Journal of Selected Topics in Quantum Electronics•Jan 1, 2009•37 citations

Optoelectronic characterization of a fiber-coupled NbN superconducting nanowire single photon detector

Zhizhong Yan, Mohsen K. Akhlaghi, Jean-Luc Orgiazzi +1 more

This paper reports our experimental setups to characterize the superconducting nanowire single photon detector (SNSPD) that is packaged in-house. Our packaging method ensures not only a satisfied optical coupling efficiency but also a wide band electrical connection. The packaging approach has been proved to meet the needs of cryogenic operations. The basic optoelectronic characterization results including quantum efficiency and dark count rate indicate a good agreement with the expected values.

Journal of Modern Optics•Nov 11, 2008•14 citations
Superconducting nanowire single-photon detectors (SNSPDs) are nanodevices usually made from thin niobium nitride (NbN) films. Operated at liquid helium temperature, they can exhibit high detection efficiency with low dark-counts associated with a fast response time and a low timing jitter. Covering a broad detection range from ultraviolet to mid-infrared, SNSPDs are a very attractive alternative to silicon or gallium arsenide based semiconductor detectors for fiber based telecommunication when single-photon sensitivity and high counting rates are necessary. \nEfficient packaging and fiber coupling of a SNSPD is in itself a real challenge and is often a limiting factor in reaching high system quantum efficiency. Our approach makes use of a controlled expansion alloy which has been adequately heat treated to enhance its characteristics for cryogenic operation. This insures the integrity of the optical coupling at cryogenic temperatures while done at room temperature. It also provides a good attenuation for electromagnetic interference due to the high relative permeability of the nickel-iron alloy. The small form factor of this pigtailed optical fiber package makes it versatile and could be easily integrated with a commercial cryogen-free system or simply dipped into a standard helium transport Dewar. We report on our theoretical and experimental methodology to evaluate the optical coupling quality and present the optoelectronic characterization of two devices packaged in this way. Electrical simulation is studied to understand the speed limitation factor inherent to these devices and preliminary speed and jitter measurements are reported.
Efficient packaging and fiber coupling of a superconducting niobium nitride nanowire single photon detector is in itself a real challenge and is often a limiting factor to reach a high system quantum efficiency. Our approach makes use of a controlled expansion alloy, Carpenter Invar 36, that has been adequately heat treated to enhance its characteristics for cryogenic operation. This insures the integrity of the optical coupling done at room temperature while providing a good attenuation for electromagnetic interference due to the high relative permeability of this nickel-iron alloy. The small form factor of this optical fiber pigtailed package makes it versatile and could be easily integrated with a commercial cryogen-free system or simply dipped into a standard helium transport Dewar. We report on our experimental methodology to evaluate the optical coupling quality and present the optoelectronic characterization of two devices packaged in this way.
The Superconducting Nanowire single-photon detector (SNSPD) made with niobium-titanium nitride (NbTiN) thin films fabricated on oxidized silicon substrates are highly promising nanodevices. The SNSPD is an immensely capable infrared single photon detector. When cooled down with liquid helium the device exhibits high detection efficiency, low dark-counts in spite of fast response times, and low timing jitter. For good single-photon sensitivity at telecom wavelengths, picosecod timing resolutions (<100 ps), and high counting frequencies, the SNSPD is first choice compared to the alternatives like indium gallium arsenide avalanche diode detectors, silicon single photon avalanche diode detectors, and other superconducting single photon technology like, transition edge detectors. These SNSPD characteristics make it ideal for long distance quantum key distribution (QKD). \nAlthough the exploitation of the constructive interference that occurs at the SiO2/Si interface can boost detector efficiency, efficient packaging and fiber coupling is often a limiting factor in the overall system quantum efficiency (SQE). In an attempt to maximize SQE, we use a controlled expansion alloy for optimal performance at cryogenic temperatures. This nickel-iron alloy has a high relative permeability and, therefore, attenuates electromagnetic interference. Our report focuses on the theoretical and experimental methods used in the characterization of an un-patterned NbTiN superconducting nanowire. We use simulations based on the gathered experimental data to design an optimal SNSPD meander and calculate its expected SQE. We also use simulations to analyze the speed and value added to secure key rates in long distance QKD schemes up to 400 km with down-conversion sources with positively spectrally correlated and decorrelated photon pairs at 1550 nm wavelength.
We have developed a practical superconducting nanowire single photon detector (SNSPD) system with our superconducting thin films and devices fabrication, optical coupling packaging, and cryogenic technology. The SNSPD devices were fabricated from high-quality niobium nitride (NbN) ultra-thin films that were epitaxially grown on single-crystal MgO substrates, and optical cavity structure were applied for improvement of photo absorption efficiency. The SNSPD system was developed based on a compact Gifford-McMahon (GM) cryocooler, in which SNSPD can operate continuously at temperature of 2.9 K +/- 10 mK with low power consumption without any liquid cryogens. The system detection efficiencies at 1550 nm wavelength (at a 100 Hz dark count rate) were found to be 2.6% for device without optical cavity and 21% for device with optical cavity. The response speed of devices showed maximally 200 MHz with 5 × 5 mm square device, and timing jitter of 100 ps full width at a half maximum (FWHM) was observed.
Superconducting nanowire single photon detectors (SNSPD) offer excellent performance for infrared single photon detection, combining high efficiency, low timing jitter, low dark count rates and high photon counting rates. Promising application areas for SNSPDs include quantum key distribution, space-to-ground communications and single photon remote sensing [1]. SNSPDs are typically made with ultrathin niobium nitride (NbN) films with thickness 4 nm and a superconducting transition temperature above 9 K. NbN offers high performance in the near infrared but their sensitivity drops at wavelengths beyond 2 um. There is growing interest in potential photon counting applications in the mid infrared domain (for example remote sensing of greenhouse gases in the atmosphere [2]). One way to overcome the wavelength limit in NbN SNSPDs is to use films with a lower superconducting energy gap [3]. Here we report on the study of SNSPDs fabricated with thin films of titanium nitride (TiN). We compare TiN films deposited by atomic layer deposition (ALD) and by magnetron sputtering. The TiN films range in thickness from 5 to 60 nm, with superconducting transition temperatures from ~1 K to 3.5 K. We have analyzed the films via transmission electron microscopy and variable angle spectroscopic ellipsometry. We characterize TiN SNSPDs performance from near to mid-infrared at wavelengths (1-4 um) with fast optical parametric oscillator (OPO) source. We compare the performance of TiN SNSPDs to devices based on other lower gap materials: MoSi, NbTiN, WSi. [1] Natarajan et al Superconductor Science and Technology 25 063001 (2012) [2] Abshire et al Laser Applications to Chemical, Security and Environmental Analysis, (Optical Society of America, 2008) paper LMA4 [3] Verma et al Applied Physics Letters 105 022602 (2014)
Superconducting nanowire single-photon detectors (SNSPDs or SSPD) are highly promising devices in the growing field of quantum information and communications technology. We have developed a practical SSPD system with our superconducting thin films and devices fabrication, optical coupling packaging, and cryogenic technology. The SSPD system consists of six-channel SSPD devices and a compact Gifford-McMahon (GM) cryocooler, and can operate continuously on 100 V ac power without the need for any cryogens. The SSPD devices were fabricated from high-quality niobium nitride (NbN) ultrathin films that were epitaxially grown on single-crystal MgO substrates. The packaged SSPD devices were temperature stabilized to 2.96 K ± 10 mK. The system detection efficiency for an SSPD device with an area of 20 × 20 ¿m2was found to be 2.6% and 4.5% at wavelengths of 1550 and 1310 nm, respectively, at a dark count rate of 100 Hz, and a jitter of 100 ps full-width at half maximum. We also performed ultrafast BB84 quantum key distribution (QKD) field testing and entanglement-based QKD experiments using these SSPD devices.