Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Modern Optics

Optoelectronic characterization of a fiber-coupled NbN superconducting nanowire single photon detector

Zhizhong Yan, Mohsen K. Akhlaghi, Jean-Luc Orgiazzi, A. Hamed Majedi

Published Nov 11, 2008• 14 citations
Publisher

Abstract

This paper reports our experimental setups to characterize the superconducting nanowire single photon detector (SNSPD) that is packaged in-house. Our packaging method ensures not only a satisfied optical coupling efficiency but also a wide band electrical connection. The packaging approach has been proved to meet the needs of cryogenic operations. The basic optoelectronic characterization results including quantum efficiency and dark count rate indicate a good agreement with the expected values.

DOI
10.1080/09500340802339818

Related papers

Packaging and Characterization of NbN Superconducting Nanowire Single Photon Detectors

Jean-Luc Orgiazzi

Superconducting nanowire single-photon detectors (SNSPDs) are nanodevices usually made from thin niobium nitride (NbN) films. Operated at liquid helium temperature, they can exhibit high detection efficiency with low dark-counts associated with a fast response time and a low timing jitter. Covering a broad detection range from ultraviolet to mid-infrared, SNSPDs are a very attractive alternative to silicon or gallium arsenide based semiconductor detectors for fiber based telecommunication when single-photon sensitivity and high counting rates are necessary. \nEfficient packaging and fiber coupling of a SNSPD is in itself a real challenge and is often a limiting factor in reaching high system quantum efficiency. Our approach makes use of a controlled expansion alloy which has been adequately heat treated to enhance its characteristics for cryogenic operation. This insures the integrity of the optical coupling at cryogenic temperatures while done at room temperature. It also provides a good attenuation for electromagnetic interference due to the high relative permeability of the nickel-iron alloy. The small form factor of this pigtailed optical fiber package makes it versatile and could be easily integrated with a commercial cryogen-free system or simply dipped into a standard helium transport Dewar. We report on our theoretical and experimental methodology to evaluate the optical coupling quality and present the optoelectronic characterization of two devices packaged in this way. Electrical simulation is studied to understand the speed limitation factor inherent to these devices and preliminary speed and jitter measurements are reported.

•May 22, 2009•0 citations

Quantum Optoelectronic Detection and Mixing in the Nanowire Superconducting Structure

Zhizhong Yan

The recent advancement of superconducting nano devices has allowed for making a Superconducting Nanowire Single Photon Detector (SNSPD), whose extraordinary features have strongly motivated the research community to exploit it in many practical applications. In this thesis, an experimental setup for testing the SNSPD has been established. It contains an in-house packaging that meets the requirements of RF/microwave and optoelectronic characterizations. The quantum efficiency and detection efficiency measurements have confirmed that our approach is satisfactory. The dark count performance has reached the anticipated level. The factors affecting rise and fall times of the photoresponses are addressed. \n \nBased on the successful setup, the characterizations including dc, small signal ac measurements have been undertaken. The measurements are aimed at quantitatively investigating Cooper pair density in the superconducting nanowire. The experimental method involves a two-step, small signal S-parameter measurement either in the presence or absence of optical powers. The subsequent measurements by varying the temperature and dc bias current have achieved remarkable understanding on the physical properties of SNSPD nanowires. Then, the electrically induced nonlinearity is studied via the large signal RF and Microwave measurements. The experiments are a set of one-tone and two-tone measurements, in which either the RF driving power is varied at a fixed frequency, or vice versa. Two major nonlinear microwave circuit analysis methods, i.e. time-domain transient and hybrid-domain harmonic balance analysis, are employed. The simulation result reveals the optimized conditions of reaching the desired nonlinearity. \n \nFinally, we have successfully measured the optoelectronic mixing products in an electrically pumped optoelectronic mixer, which has identical structures as that of the SNSPD. The experiments confirm that this mixer is not only sensitive to the classical light intensities, but also to that of the single photon level. Meanwhile, the quantum conversion matrices is derived to interpret the quantum optoelectronic mixing effects.

•Jan 20, 2010•0 citations

Fiber coupling of superconducting nanowire single-photon detectors

刘登宽 LIU Deng-kuan, 陈思井 CHEN Si-jing, Lixing You +2 more

In order to investigate the characteristics of the package and fiber coupling of a Superconducting Nanowire Single-photon Detector(SNSPD),the SNSPD was successfully built up in our laboratory.Experiments show that the quantum efficiencies of the detector under different light wavelengths are 6%@1310nm and 3%@1550nm when the dark count rate is 100 Hz.Then,as the distance(gap) between SNSPD and optical fiber would be changed due to the thermal stress during cooling,and would cause a misalignment,two kinds of fiber coupling methods to modulate the gap at room temperature were proposed.Finally,by altering the wavelength of the input light,the exact values of the gap at different temperatures were measured and then the influence of temperature on the gap were figured out by an experiment.The experimental results indicate that decreases of the gap for the two packages are 4.1 μm and 17 μm when the temperature dereases 270 K.Based on the analysis of package material and structure,the gaps at both room and low temperature were calculated theoretically.The result fits well with that of the experiments and it may offer some references to the design of new package and fiber coupling in the future.

Optics and Precision Engineering•Jan 1, 2013•2 citations

Compactly packaged superconducting nanowire single-photon detector with an optical cavity for multichannel system

Shigehito Miki, Masanori Takeda, Mikio Fujiwara +2 more

We developed superconducting nanowire single-photon detectors with an optical cavity (OC-SNSPDs) for multichannel systems. For efficient coupling, the devices were installed in compact fiber-coupled packages after their substrate thickness was reduced from 400 to 45 microm. The measured detection efficiency (DE) measurement at different substrate thicknesses and the estimation of optical coupling efficiency indicated that approximately 98% of the input light beam could be radiated on a 15 x 15 microm2 nanowire area from behind the substrate. The DEs of a NbN OC-SNSPD system were observed to be 9.5% and 25% at 1550 nm and 1310 nm, respectively (dark-count rate: 100 c/s).

arXiv:1003.0226•Optics Express•Dec 9, 2009•63 citations

Robust Packaging Technique and Characterization of Fiber-Pigtailed Superconducting NbN Nanowire Single Photon Detectors

Jean-Luc Orgiazzi, A. Hamed Majedi

Efficient packaging and fiber coupling of a superconducting niobium nitride nanowire single photon detector is in itself a real challenge and is often a limiting factor to reach a high system quantum efficiency. Our approach makes use of a controlled expansion alloy, Carpenter Invar 36, that has been adequately heat treated to enhance its characteristics for cryogenic operation. This insures the integrity of the optical coupling done at room temperature while providing a good attenuation for electromagnetic interference due to the high relative permeability of this nickel-iron alloy. The small form factor of this optical fiber pigtailed package makes it versatile and could be easily integrated with a commercial cryogen-free system or simply dipped into a standard helium transport Dewar. We report on our experimental methodology to evaluate the optical coupling quality and present the optoelectronic characterization of two devices packaged in this way.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•9 citations

Development of practical superconducting nanowire single photon detector system with high detection efficiency

Shigehito Miki, Taro Yamashita, Hirotaka Terai +3 more

We have developed a practical superconducting nanowire single photon detector (SNSPD) system with our superconducting thin films and devices fabrication, optical coupling packaging, and cryogenic technology. The SNSPD devices were fabricated from high-quality niobium nitride (NbN) ultra-thin films that were epitaxially grown on single-crystal MgO substrates, and optical cavity structure were applied for improvement of photo absorption efficiency. The SNSPD system was developed based on a compact Gifford-McMahon (GM) cryocooler, in which SNSPD can operate continuously at temperature of 2.9 K +/- 10 mK with low power consumption without any liquid cryogens. The system detection efficiencies at 1550 nm wavelength (at a 100 Hz dark count rate) were found to be 2.6% for device without optical cavity and 21% for device with optical cavity. The response speed of devices showed maximally 200 MHz with 5 × 5 mm square device, and timing jitter of 100 ps full width at a half maximum (FWHM) was observed.

IEEE International Conference on Space Optical Systems and Applications (ICSOS)•May 1, 2011•0 citations
This paper reports our experimental setups to characterize the superconducting nanowire single photon detector (SNSPD) that is packaged in-house. Our packaging method ensures not only a satisfied optical coupling efficiency but also a wide band electrical connection. The packaging approach has been proved to meet the needs of cryogenic operations. The basic optoelectronic characterization results including quantum efficiency and dark count rate indicate a good agreement with the expected values.
Superconducting nanowire single-photon detectors (SNSPDs) are nanodevices usually made from thin niobium nitride (NbN) films. Operated at liquid helium temperature, they can exhibit high detection efficiency with low dark-counts associated with a fast response time and a low timing jitter. Covering a broad detection range from ultraviolet to mid-infrared, SNSPDs are a very attractive alternative to silicon or gallium arsenide based semiconductor detectors for fiber based telecommunication when single-photon sensitivity and high counting rates are necessary. \nEfficient packaging and fiber coupling of a SNSPD is in itself a real challenge and is often a limiting factor in reaching high system quantum efficiency. Our approach makes use of a controlled expansion alloy which has been adequately heat treated to enhance its characteristics for cryogenic operation. This insures the integrity of the optical coupling at cryogenic temperatures while done at room temperature. It also provides a good attenuation for electromagnetic interference due to the high relative permeability of the nickel-iron alloy. The small form factor of this pigtailed optical fiber package makes it versatile and could be easily integrated with a commercial cryogen-free system or simply dipped into a standard helium transport Dewar. We report on our theoretical and experimental methodology to evaluate the optical coupling quality and present the optoelectronic characterization of two devices packaged in this way. Electrical simulation is studied to understand the speed limitation factor inherent to these devices and preliminary speed and jitter measurements are reported.
The recent advancement of superconducting nano devices has allowed for making a Superconducting Nanowire Single Photon Detector (SNSPD), whose extraordinary features have strongly motivated the research community to exploit it in many practical applications. In this thesis, an experimental setup for testing the SNSPD has been established. It contains an in-house packaging that meets the requirements of RF/microwave and optoelectronic characterizations. The quantum efficiency and detection efficiency measurements have confirmed that our approach is satisfactory. The dark count performance has reached the anticipated level. The factors affecting rise and fall times of the photoresponses are addressed. \n \nBased on the successful setup, the characterizations including dc, small signal ac measurements have been undertaken. The measurements are aimed at quantitatively investigating Cooper pair density in the superconducting nanowire. The experimental method involves a two-step, small signal S-parameter measurement either in the presence or absence of optical powers. The subsequent measurements by varying the temperature and dc bias current have achieved remarkable understanding on the physical properties of SNSPD nanowires. Then, the electrically induced nonlinearity is studied via the large signal RF and Microwave measurements. The experiments are a set of one-tone and two-tone measurements, in which either the RF driving power is varied at a fixed frequency, or vice versa. Two major nonlinear microwave circuit analysis methods, i.e. time-domain transient and hybrid-domain harmonic balance analysis, are employed. The simulation result reveals the optimized conditions of reaching the desired nonlinearity. \n \nFinally, we have successfully measured the optoelectronic mixing products in an electrically pumped optoelectronic mixer, which has identical structures as that of the SNSPD. The experiments confirm that this mixer is not only sensitive to the classical light intensities, but also to that of the single photon level. Meanwhile, the quantum conversion matrices is derived to interpret the quantum optoelectronic mixing effects.
In order to investigate the characteristics of the package and fiber coupling of a Superconducting Nanowire Single-photon Detector(SNSPD),the SNSPD was successfully built up in our laboratory.Experiments show that the quantum efficiencies of the detector under different light wavelengths are 6%@1310nm and 3%@1550nm when the dark count rate is 100 Hz.Then,as the distance(gap) between SNSPD and optical fiber would be changed due to the thermal stress during cooling,and would cause a misalignment,two kinds of fiber coupling methods to modulate the gap at room temperature were proposed.Finally,by altering the wavelength of the input light,the exact values of the gap at different temperatures were measured and then the influence of temperature on the gap were figured out by an experiment.The experimental results indicate that decreases of the gap for the two packages are 4.1 μm and 17 μm when the temperature dereases 270 K.Based on the analysis of package material and structure,the gaps at both room and low temperature were calculated theoretically.The result fits well with that of the experiments and it may offer some references to the design of new package and fiber coupling in the future.
We developed superconducting nanowire single-photon detectors with an optical cavity (OC-SNSPDs) for multichannel systems. For efficient coupling, the devices were installed in compact fiber-coupled packages after their substrate thickness was reduced from 400 to 45 microm. The measured detection efficiency (DE) measurement at different substrate thicknesses and the estimation of optical coupling efficiency indicated that approximately 98% of the input light beam could be radiated on a 15 x 15 microm2 nanowire area from behind the substrate. The DEs of a NbN OC-SNSPD system were observed to be 9.5% and 25% at 1550 nm and 1310 nm, respectively (dark-count rate: 100 c/s).
Efficient packaging and fiber coupling of a superconducting niobium nitride nanowire single photon detector is in itself a real challenge and is often a limiting factor to reach a high system quantum efficiency. Our approach makes use of a controlled expansion alloy, Carpenter Invar 36, that has been adequately heat treated to enhance its characteristics for cryogenic operation. This insures the integrity of the optical coupling done at room temperature while providing a good attenuation for electromagnetic interference due to the high relative permeability of this nickel-iron alloy. The small form factor of this optical fiber pigtailed package makes it versatile and could be easily integrated with a commercial cryogen-free system or simply dipped into a standard helium transport Dewar. We report on our experimental methodology to evaluate the optical coupling quality and present the optoelectronic characterization of two devices packaged in this way.
We have developed a practical superconducting nanowire single photon detector (SNSPD) system with our superconducting thin films and devices fabrication, optical coupling packaging, and cryogenic technology. The SNSPD devices were fabricated from high-quality niobium nitride (NbN) ultra-thin films that were epitaxially grown on single-crystal MgO substrates, and optical cavity structure were applied for improvement of photo absorption efficiency. The SNSPD system was developed based on a compact Gifford-McMahon (GM) cryocooler, in which SNSPD can operate continuously at temperature of 2.9 K +/- 10 mK with low power consumption without any liquid cryogens. The system detection efficiencies at 1550 nm wavelength (at a 100 Hz dark count rate) were found to be 2.6% for device without optical cavity and 21% for device with optical cavity. The response speed of devices showed maximally 200 MHz with 5 × 5 mm square device, and timing jitter of 100 ps full width at a half maximum (FWHM) was observed.