Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A tool kit for the design of superconducting programmable gate arrays

Coenrad Johann Fourie

Published Dec 1, 2004• 10 citations
OpenAlex

Abstract

ENGLISH ABSTRACT: The development of a tool kit for the design of superconducting programmable gate \narrays (SPGAs) is discussed. A circuit optimizer using genetic algorithms is developed \nand evaluated. Techniques and a program are also developed for the generation of \nsegmentized 3D models with which to calculate inductance in circuit structures through \nFastHenry. The ability to add random variations to the dimensions of the models is \nincluded. These tools are then used to design novel latching elements that allow the \nconstruction of reprogrammable Rapid Single Flux Quantum (RSFQ) circuits. A circular \nprocess is used, whereby layouts are converted back to circuit diagrams through element \nextraction, and reoptimized if necessary. Two programmable frequency dividers are then \ndesigned; one for testing the routing and switch structures and programming architecture \nof an SPGA, and another compact one for testing the latching elements and off-chip \ninterface. The dissertation concludes with an overview of the circuits necessary for the \nimplementation of a fully functional SPGA.

Related papers

The design and testing of a superconducting programmable gate array

H. van Heerden

This thesis investigates to the design, analysis and testing of a Superconducting Programmable Gate Array (SPGA). The objective was to apply existing programmable logic concepts to RSFQ circuits and in the process develop a working prototype of a superconducting programmable logic device. Various programmable logic technologies and architectures were examined and compared to find the best solution. Using Rapid Single Flux Quantum (RSFQ) circuits as building blocks, a complete functional design was assembled incorporating a routing architecture and logic blocks. The Large-Scale Integrated circuit (LSI) layout of the final chip is presented and discussed followed by a discussion on testing. This thesis demonstrates the successful implementation of a fully functional reprogrammable logic device using RSFQ circuitry.

•Mar 1, 2006•2 citations

An RSFQ Superconductive Programmable Gate Array

Coenrad Johann Fourie, H. van Heerden

Field-programmable gate arrays (FPGAs) allow circuit reconfiguration in the field, which adds to the flexibility of electronic systems. Applied to superconductive electronics, reprogrammability allows system functionality to be changed without remanufacturing the circuit or dismantling a cryogenic setup. We discuss the design issues relevant to a superconducting programmable gate array (SPGA), and report an elementary 4200-junction SPGA. The SPGA is built around interconnected 2-input logic blocks which contain 4-bit lookup tables. Designs for the programming frame, address decoding, lookup tables and switch implementations are discussed, together with design constraints imposed by the unidirectional nature and large size of single flux quantum (SFQ) transmission lines.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•17 citations

Design automation methodology and tools for superconductive electronics

Massoud Pedram, Yanzhi Wang

Josephson junction-based superconducting logic families have been proposed to implement analog and digital signals, which can achieve low energy dissipation and ultra-fast switching speed. There are two representative technologies: DC-biased RSFQ (rapid single flux quantum) technology and its variants that achieve a verified speed of 370 Ghz, and AC-biased AQFP (adiabatic quantum-flux-parametron) that achieves an energy dissipation near quantum limits. Despite extraordinary characteristics of the superconducting logic families, many technical challenges remain, including the choice of circuit fabrics and architectures that utilize the SFQ technology and the development of effective design automation methodologies and tools. This paper presents our work on developing design flows and tools for DC- and AC-biased SFQ circuits, leveraging unique characteristics and design requirements of the SFQ logic families. More precisely, physical design algorithms, including placement, clock tree routing, and signal routing algorithms targeting RSFQ circuits are presented first. Next, a majority/minority gate-based automatic synthesis framework targeting AQFP logic circuits is described. Finally, experimental results to demonstrate the efficacy of the proposed framework and tools are presented.

•Nov 5, 2018•15 citations

Reconfigurable Logic Cell for Superconducting Magnetic Field Programmable Gate Array

Naveen Kumar Katam, Haolin Cong, Massoud Pedram

Field Programmable gate arrays (FPGAs) are one of the most successful circuits in the semiconductor industry. In the absence of a reliable three-terminal switch like MOSFET for rapid single flux quantum(RSFQ) technology, it was difficult to implement FPGA like reconfiguralbe circuits. However, a recently proposed superconducting magnetic FPGA (SMFPGA) implements a controllable switch by controlling the critical current of magnetic Josephson Junctions (MJJs) placed in energy-efficient RSFQ bias network. For implementing a configurable logic block (CLB) with a smaller area for the said FPGA, we designed a reconfigurable gate that can implement four basic logical functions: AND, OR, XOR and NOT. The programmability to implement the four functions is achieved by introducing MJJs in the circuit at specific locations and programming their critical current. The gate is made reconfigurable by having the ability to change both the bias current at different ports and the critical current of a JJ in the gate to two different values. This makes the size of CLB ten times smaller compared to the earlier design and simplifies the SMFPGA. We describe the design methodology and the simulation results of the reconfigurable gate.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•1 citation

Development of an All-SFQ Superconducting Field-Programmable Gate Array

Calvin Christopher Maree, Coenrad Johann Fourie

Recent advances in fabrication complexity and density-especially for the Institute of Advanced Industrial Science and Technology (AIST) advanced process 2 (ADP2) process and the MIT Lincoln Lab (MITLL) SFQ5ee process and beyond-allow the implementation of a superconducting field-programmable gate array (SFPGA) with sufficient complexity to host a number of different programmed functions. We discuss design choices for an all single flux quantum SFPGA targeting these modern processes, making heavy use of passive transmission line (PTL) layers they provide. Various configurations for lookup tables, basic logic elements and timing schemes are shown, and a viable switch block implementation is discussed. Academic FPGA electronic design automation (EDA) tools are repurposed for mapping Verilog hardware description language (HDL) functions to the chosen SFPGA design, whilst HDL and electrical simulations are used to show its correct operation. We show simulations for programming and the operation of an SFPGA, and discuss die size requirements for practical implementation.

IEEE Transactions on Applied Superconductivity•Dec 11, 2018•5 citations

Single flux quantum circuit technology and CAD overview

Coenrad Johann Fourie

Single Flux Quantum (SFQ) electronic circuits originated with the advent of Rapid Single Flux Quantum (RSFQ) logic in 1985 and have since evolved to include more energy-efficient technologies such as ERSFQ and eSFQ. SFQ logic circuits, based on the manipulation of quantized flux pulses, have been demonstrated to run at clock speeds in excess of 120 GHz, and with bit-switch energy below 1 aJ. Small SFQ microprocessors have been developed, but characteristics inherent to SFQ circuits and the lack of circuit design tools have hampered the development of large SFQ systems. SFQ circuit characteristics include fan-out of one and the subsequent demand for pulse splitters, gate-level clocking, susceptibility to magnetic fields and sensitivity to intra-gate and inter-gate inductance. Superconducting interconnects propagate data pulses at the speed of light, but suffer from reflections at vias that attenuate transmitted pulses. The recently started IARPA SuperTools program aims to deliver SFQ Computer-Aided Design (CAD) tools that can enable the successful design of 64 bit RISC processors given the characteristics of SFQ circuits. A discussion on the technology of SFQ circuits and the most modern SFQ fabrication processes is presented, with a focus on the unique electronic design automation CAD requirements for the design, layout and verification of SFQ circuits.

•Nov 5, 2018•9 citations
ENGLISH ABSTRACT: The development of a tool kit for the design of superconducting programmable gate \narrays (SPGAs) is discussed. A circuit optimizer using genetic algorithms is developed \nand evaluated. Techniques and a program are also developed for the generation of \nsegmentized 3D models with which to calculate inductance in circuit structures through \nFastHenry. The ability to add random variations to the dimensions of the models is \nincluded. These tools are then used to design novel latching elements that allow the \nconstruction of reprogrammable Rapid Single Flux Quantum (RSFQ) circuits. A circular \nprocess is used, whereby layouts are converted back to circuit diagrams through element \nextraction, and reoptimized if necessary. Two programmable frequency dividers are then \ndesigned; one for testing the routing and switch structures and programming architecture \nof an SPGA, and another compact one for testing the latching elements and off-chip \ninterface. The dissertation concludes with an overview of the circuits necessary for the \nimplementation of a fully functional SPGA.
This thesis investigates to the design, analysis and testing of a Superconducting Programmable Gate Array (SPGA). The objective was to apply existing programmable logic concepts to RSFQ circuits and in the process develop a working prototype of a superconducting programmable logic device. Various programmable logic technologies and architectures were examined and compared to find the best solution. Using Rapid Single Flux Quantum (RSFQ) circuits as building blocks, a complete functional design was assembled incorporating a routing architecture and logic blocks. The Large-Scale Integrated circuit (LSI) layout of the final chip is presented and discussed followed by a discussion on testing. This thesis demonstrates the successful implementation of a fully functional reprogrammable logic device using RSFQ circuitry.
Field-programmable gate arrays (FPGAs) allow circuit reconfiguration in the field, which adds to the flexibility of electronic systems. Applied to superconductive electronics, reprogrammability allows system functionality to be changed without remanufacturing the circuit or dismantling a cryogenic setup. We discuss the design issues relevant to a superconducting programmable gate array (SPGA), and report an elementary 4200-junction SPGA. The SPGA is built around interconnected 2-input logic blocks which contain 4-bit lookup tables. Designs for the programming frame, address decoding, lookup tables and switch implementations are discussed, together with design constraints imposed by the unidirectional nature and large size of single flux quantum (SFQ) transmission lines.
Josephson junction-based superconducting logic families have been proposed to implement analog and digital signals, which can achieve low energy dissipation and ultra-fast switching speed. There are two representative technologies: DC-biased RSFQ (rapid single flux quantum) technology and its variants that achieve a verified speed of 370 Ghz, and AC-biased AQFP (adiabatic quantum-flux-parametron) that achieves an energy dissipation near quantum limits. Despite extraordinary characteristics of the superconducting logic families, many technical challenges remain, including the choice of circuit fabrics and architectures that utilize the SFQ technology and the development of effective design automation methodologies and tools. This paper presents our work on developing design flows and tools for DC- and AC-biased SFQ circuits, leveraging unique characteristics and design requirements of the SFQ logic families. More precisely, physical design algorithms, including placement, clock tree routing, and signal routing algorithms targeting RSFQ circuits are presented first. Next, a majority/minority gate-based automatic synthesis framework targeting AQFP logic circuits is described. Finally, experimental results to demonstrate the efficacy of the proposed framework and tools are presented.
Field Programmable gate arrays (FPGAs) are one of the most successful circuits in the semiconductor industry. In the absence of a reliable three-terminal switch like MOSFET for rapid single flux quantum(RSFQ) technology, it was difficult to implement FPGA like reconfiguralbe circuits. However, a recently proposed superconducting magnetic FPGA (SMFPGA) implements a controllable switch by controlling the critical current of magnetic Josephson Junctions (MJJs) placed in energy-efficient RSFQ bias network. For implementing a configurable logic block (CLB) with a smaller area for the said FPGA, we designed a reconfigurable gate that can implement four basic logical functions: AND, OR, XOR and NOT. The programmability to implement the four functions is achieved by introducing MJJs in the circuit at specific locations and programming their critical current. The gate is made reconfigurable by having the ability to change both the bias current at different ports and the critical current of a JJ in the gate to two different values. This makes the size of CLB ten times smaller compared to the earlier design and simplifies the SMFPGA. We describe the design methodology and the simulation results of the reconfigurable gate.
Recent advances in fabrication complexity and density-especially for the Institute of Advanced Industrial Science and Technology (AIST) advanced process 2 (ADP2) process and the MIT Lincoln Lab (MITLL) SFQ5ee process and beyond-allow the implementation of a superconducting field-programmable gate array (SFPGA) with sufficient complexity to host a number of different programmed functions. We discuss design choices for an all single flux quantum SFPGA targeting these modern processes, making heavy use of passive transmission line (PTL) layers they provide. Various configurations for lookup tables, basic logic elements and timing schemes are shown, and a viable switch block implementation is discussed. Academic FPGA electronic design automation (EDA) tools are repurposed for mapping Verilog hardware description language (HDL) functions to the chosen SFPGA design, whilst HDL and electrical simulations are used to show its correct operation. We show simulations for programming and the operation of an SFPGA, and discuss die size requirements for practical implementation.
Single Flux Quantum (SFQ) electronic circuits originated with the advent of Rapid Single Flux Quantum (RSFQ) logic in 1985 and have since evolved to include more energy-efficient technologies such as ERSFQ and eSFQ. SFQ logic circuits, based on the manipulation of quantized flux pulses, have been demonstrated to run at clock speeds in excess of 120 GHz, and with bit-switch energy below 1 aJ. Small SFQ microprocessors have been developed, but characteristics inherent to SFQ circuits and the lack of circuit design tools have hampered the development of large SFQ systems. SFQ circuit characteristics include fan-out of one and the subsequent demand for pulse splitters, gate-level clocking, susceptibility to magnetic fields and sensitivity to intra-gate and inter-gate inductance. Superconducting interconnects propagate data pulses at the speed of light, but suffer from reflections at vias that attenuate transmitted pulses. The recently started IARPA SuperTools program aims to deliver SFQ Computer-Aided Design (CAD) tools that can enable the successful design of 64 bit RISC processors given the characteristics of SFQ circuits. A discussion on the technology of SFQ circuits and the most modern SFQ fabrication processes is presented, with a focus on the unique electronic design automation CAD requirements for the design, layout and verification of SFQ circuits.