© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

IEEE Journal of Quantum Electronics

A tunable wavelength conversion and wavelength add/drop scheme based on cascaded second-order nonlinearity with double-pass configuration

Song Yu, Wanyi Gu

Published Jun 22, 2005• 29 citations

Abstract

A selective and tunable wavelength conversion and wavelength add/drop scheme based on sum- and difference-frequency generation (SFG+DFG) is proposed, in which the concept of "double-pass" is introduced. An arbitrary channel can be dropped from a wavelength division multiplexing (WDM) signal and added to another WDM signal at arbitrary wavelength. The channel to be dropped is selected and depleted (dropped) by adjusting the pump 1 through sum frequency generation (SFG) during the forward propagation. Subsequently, the difference frequency generation (DFG), taking place during the backward propagation, is employed to convert (add) the dropped channel to another channel in another WDM signal by adjusting the pump 2. For the dropped and added channel, the phase matching of SFG and DFG are nearly perfect and the theoretical expressions are derived under the assumption that the two pumps are undepleted. The power of pump 1 is optimized to deplete the dropped channel completely, while that of pump 2 is chosen to maximize the output power of the added channel. Numerical calculations are performed to investigate the propagation of the other channels whose phase is mismatched. To suppress the crosstalk, the spacing of the WDM channels is chosen to be 0.2 nm (25 GHz). We have also compared our scheme with others (such as the single-pass scheme and the double waveguide scheme) and shown that ours possesses several distinct advantages.

DOI: 10.1109/jqe.2005.848916

Related papers

Cascaded wavelength conversions based on sum-frequency generation and difference-frequency generation

Chang‐Qing Xu, Bo Chen

A novel wavelength conversion scheme based on cascaded sum-frequency generation (SFG) and difference-frequency generation (DFG) is proposed and demonstrated in a MgO-doped LiNbO3 quasi-phase-matched waveguide. In this scheme, two pump wavelengths are set outside the communication band. It is shown that the same conversion efficiency can be achieved by use of two pump sources with lower output power (P1, P2) in this scheme compared with the conventional cascaded wavelength conversion technique based on second-harmonic generation and DFG with a single higher-power pump beam (P = P1 + P2) that is due to the use of a larger SFG nonlinear coefficient. The results significantly influence the selection of a suitable nonlinear interaction scheme for practical applications.

Optics Letters•Feb 1, 2004•51 citations

Comparison of cascaded χ2 wavelength conversions in quasi-phase-matched (QPM) waveguides

Bo Chen, Chang‐Qing Xu

Cascaded second-order nonlinear interaction (&chi(2));based wavelength conversion technique has attracted much attention due to its unique characteristics such as low noise and broadband, which are critical in fiber communication networks. In this report, wavelength conversions based on the newly proposed SFG-DFG (sum frequency generation - difference frequency generation) and conventional SHG-DFG (second harmonic generation - difference frequency generation) are studied and compared both experimentally and theoretically in a LiNbO3 quasi-phase matched (QPM) waveguide. It is shown that the same conversion efficiency can be achieved by employing two pump sources with only half power each (P1, P2) in the SFG-DFG scheme as compared with the SHG-DFG scheme with a single higher power pump beam (P=P1+P2). It is shown that the cascaded SFG-DFG based wavelength conversion has a larger 3-dB pump tolerance bandwidth. The theoretical results are consistent well with the experimental ones. It is found that the pump wavelength difference can be separated by a span as large as 75 nm, while 3-dB signal conversion efficiency is retained in a 45 mm-long device. It is also exhibited that tolerance of temperature for the cascaded SFG-DFG remains the same as that of the cascaded SHG-DFG based devices. The results show that the SFG-DFG wavelength conversion scheme is very attractive for practical applications.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 16, 2004•0 citations

Analysis of Novel Cascaded $chi^(2)$ (SFG $+$ DFG) Wavelength Conversions in Quasi-Phase-Matched Waveguides

B. Chen, Chang‐Qing Xu

A novel cascaded second-order nonlinear interaction (/spl chi//sup (2)/), which is simultaneously based on sum frequency generation (SFG) and difference frequency generation (DFG) processes, is proposed and analyzed in quasi-phase-matched wavelength converters. Analytical expressions with clear physical insights are derived for the converted light. It is shown that the same conversion efficiency can be achieved by employing two pump sources with lower output power (P/sub p1/,P/sub p2/) in this novel scheme as compared with the conventional cascaded wavelength conversion technique based on second-harmonic generation and difference frequency generation (SHG+DFG) with a single higher power pump beam (P/sub p/=P/sub p1/+P/sub p2/). The theoretical results are consistent with the experimental ones. It is found that the pump wavelength difference can be separated by a span as large as 75 nm, while large 3-dB signal conversion bandwidth is retained. The results show that the novel cascaded /spl chi//sup (2)/ wavelength conversion scheme is very attractive for practical applications.

IEEE Journal of Quantum Electronics•Mar 1, 2004•47 citations

Broadband wavelength converter based on segmented quasi-phase matched grating

Tao Liu, Baogang Li

Broadband wavelength converters based on difference frequency generation (DFG), single-pass and double-pass cascaded second harmonic generation and difference frequency generation (SHG+DFG), single-pass and double-pass cascaded sum and difference frequency generation (SFG+DFG) are fulfilled by utilizing segmented grating structure in lithium niobate waveguide. Under the small-signal approximation, the effects of the waveguide length and the response flatness on DFG-based wavelength conversion are investigated by use of matrix operator, and then a feasible scheme to enhance the bandwidth and stability of signal and pump wave is proposed. For single-pass/double-pass SHG+DFG wavelength conversion scheme and single-pass/double-pass SFG+DFG wavelength conversion scheme, the effect of segmented grating structure on conversion bandwidth is studied theoretically and numerically, the results show that the signal conversion bandwidth can be broadened by optimizing the aperiodic grating. Moreover, the influence of "balance condition" on double-pass SFG+DFG-based wavelength conversion is analyzed, one can achieve enhanced conversion efficiency and conversion bandwidth by adjusting the power and wavelengths of pump sources according to the "balance condition". In the end, a reasonable suggestion is presented to achieve broadband wavelength conversion under different requirements.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 24, 2010•1 citation

Flattening of cascaded sum- and difference-frequency generation-based wavelength conversion by pump or period detuning

Shiming Gao, Changxi Yang, Xiaosheng Xiao +3 more

We investigate response flatting of cascaded sum- and difference- frequency generation (SFG/DFG)-based wavelength conversion in quasi-phase-matched (QPM) periodically poled lithium niobate waveguides for wavelength division multiplexing optical communication systems. The cascaded SFG/DFG-based configuration shows more robustly combined properties than conventional DFG-based and cascaded second-harmonic generation and DFG (SHG/DFG)-based configurations. The response fluctuation, generated while enhancing the conversion bandwidth, can be efficiently reduced by the method of pump detuning or QPM period detuning.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 24, 2005•0 citations

Flattop broadband wavelength converters based on double-pass cascaded SFG + DFG in quasi-phase matched waveguides

Amirhossein Tehranchi, Raman Kashyap

Wavelength converters based on double-pass quasi-phase matched cascaded sum and difference frequency generation in lossy lithium niobate waveguides with a large pump wavelength difference are numerically evaluated assuming pump wavelength detuning to flatten the response.

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)•Oct 1, 2009•0 citations

A selective and tunable wavelength conversion and wavelength add/drop scheme based on sum- and difference-frequency generation (SFG+DFG) is proposed, in which the concept of "double-pass" is introduced. An arbitrary channel can be dropped from a wavelength division multiplexing (WDM) signal and added to another WDM signal at arbitrary wavelength. The channel to be dropped is selected and depleted (dropped) by adjusting the pump 1 through sum frequency generation (SFG) during the forward propagation. Subsequently, the difference frequency generation (DFG), taking place during the backward propagation, is employed to convert (add) the dropped channel to another channel in another WDM signal by adjusting the pump 2. For the dropped and added channel, the phase matching of SFG and DFG are nearly perfect and the theoretical expressions are derived under the assumption that the two pumps are undepleted. The power of pump 1 is optimized to deplete the dropped channel completely, while that of pump 2 is chosen to maximize the output power of the added channel. Numerical calculations are performed to investigate the propagation of the other channels whose phase is mismatched. To suppress the crosstalk, the spacing of the WDM channels is chosen to be 0.2 nm (25 GHz). We have also compared our scheme with others (such as the single-pass scheme and the double waveguide scheme) and shown that ours possesses several distinct advantages.

A novel wavelength conversion scheme based on cascaded sum-frequency generation (SFG) and difference-frequency generation (DFG) is proposed and demonstrated in a MgO-doped LiNbO3 quasi-phase-matched waveguide. In this scheme, two pump wavelengths are set outside the communication band. It is shown that the same conversion efficiency can be achieved by use of two pump sources with lower output power (P1, P2) in this scheme compared with the conventional cascaded wavelength conversion technique based on second-harmonic generation and DFG with a single higher-power pump beam (P = P1 + P2) that is due to the use of a larger SFG nonlinear coefficient. The results significantly influence the selection of a suitable nonlinear interaction scheme for practical applications.

Cascaded second-order nonlinear interaction (&chi(2));based wavelength conversion technique has attracted much attention due to its unique characteristics such as low noise and broadband, which are critical in fiber communication networks. In this report, wavelength conversions based on the newly proposed SFG-DFG (sum frequency generation - difference frequency generation) and conventional SHG-DFG (second harmonic generation - difference frequency generation) are studied and compared both experimentally and theoretically in a LiNbO3 quasi-phase matched (QPM) waveguide. It is shown that the same conversion efficiency can be achieved by employing two pump sources with only half power each (P1, P2) in the SFG-DFG scheme as compared with the SHG-DFG scheme with a single higher power pump beam (P=P1+P2). It is shown that the cascaded SFG-DFG based wavelength conversion has a larger 3-dB pump tolerance bandwidth. The theoretical results are consistent well with the experimental ones. It is found that the pump wavelength difference can be separated by a span as large as 75 nm, while 3-dB signal conversion efficiency is retained in a 45 mm-long device. It is also exhibited that tolerance of temperature for the cascaded SFG-DFG remains the same as that of the cascaded SHG-DFG based devices. The results show that the SFG-DFG wavelength conversion scheme is very attractive for practical applications.

Analysis of Novel Cascaded

chi^(2)

(SFG

+

DFG) Wavelength Conversions in Quasi-Phase-Matched Waveguides

A novel cascaded second-order nonlinear interaction (/spl chi//sup (2)/), which is simultaneously based on sum frequency generation (SFG) and difference frequency generation (DFG) processes, is proposed and analyzed in quasi-phase-matched wavelength converters. Analytical expressions with clear physical insights are derived for the converted light. It is shown that the same conversion efficiency can be achieved by employing two pump sources with lower output power (P/sub p1/,P/sub p2/) in this novel scheme as compared with the conventional cascaded wavelength conversion technique based on second-harmonic generation and difference frequency generation (SHG+DFG) with a single higher power pump beam (P/sub p/=P/sub p1/+P/sub p2/). The theoretical results are consistent with the experimental ones. It is found that the pump wavelength difference can be separated by a span as large as 75 nm, while large 3-dB signal conversion bandwidth is retained. The results show that the novel cascaded /spl chi//sup (2)/ wavelength conversion scheme is very attractive for practical applications.

Broadband wavelength converters based on difference frequency generation (DFG), single-pass and double-pass cascaded second harmonic generation and difference frequency generation (SHG+DFG), single-pass and double-pass cascaded sum and difference frequency generation (SFG+DFG) are fulfilled by utilizing segmented grating structure in lithium niobate waveguide. Under the small-signal approximation, the effects of the waveguide length and the response flatness on DFG-based wavelength conversion are investigated by use of matrix operator, and then a feasible scheme to enhance the bandwidth and stability of signal and pump wave is proposed. For single-pass/double-pass SHG+DFG wavelength conversion scheme and single-pass/double-pass SFG+DFG wavelength conversion scheme, the effect of segmented grating structure on conversion bandwidth is studied theoretically and numerically, the results show that the signal conversion bandwidth can be broadened by optimizing the aperiodic grating. Moreover, the influence of "balance condition" on double-pass SFG+DFG-based wavelength conversion is analyzed, one can achieve enhanced conversion efficiency and conversion bandwidth by adjusting the power and wavelengths of pump sources according to the "balance condition". In the end, a reasonable suggestion is presented to achieve broadband wavelength conversion under different requirements.

We investigate response flatting of cascaded sum- and difference- frequency generation (SFG/DFG)-based wavelength conversion in quasi-phase-matched (QPM) periodically poled lithium niobate waveguides for wavelength division multiplexing optical communication systems. The cascaded SFG/DFG-based configuration shows more robustly combined properties than conventional DFG-based and cascaded second-harmonic generation and DFG (SHG/DFG)-based configurations. The response fluctuation, generated while enhancing the conversion bandwidth, can be efficiently reduced by the method of pump detuning or QPM period detuning.