Much recent effort has focused on coupling individual quantum emitters to optical microcavities in order to produce single photons on demand, enable single-photon optical switching, and implement functional nodes of a quantum network. Techniques to control the bandwidth and frequency of the outgoing single photons are of practical importance, allowing direct emission into telecommunications wavelengths and "hybrid" quantum networks incorporating different emitters. Here, we describe an integrated approach involving a quantum emitter coupled to a nonlinear optical resonator, in which the emission wavelength and pulse shape are controlled using the intra-cavity nonlinearity. Our scheme is general in nature, and demonstrates how the photonic environment of a quantum emitter can be tailored to determine the emission properties. As specific examples, we discuss a high Q-factor, TE-TM double-mode photonic crystal cavity design that allows for direct generation of single photons at telecom wavelengths (1425 nm) starting from an InAs/GaAs quantum dot with a 950 nm transition wavelength, and a scheme for direct optical coupling between such a quantum dot and a diamond nitrogen-vacancy center at 637 nm.
Much recent effort has focused on coupling individual quantum emitters to optical microcavities in order to produce single photons on demand, enable single-photon optical switching, and implement functional nodes of a quantum network. Techniques to control the bandwidth and frequency of the outgoing single photons are of practical importance, allowing direct emission into telecommunications wavelengths and "hybrid" quantum networks incorporating different emitters. Here, we describe an integrated approach involving a quantum emitter coupled to a nonlinear optical resonator, in which the emission wavelength and pulse shape are controlled using the intra-cavity nonlinearity. Our scheme is general in nature, and demonstrates how the photonic environment of a quantum emitter can be tailored to determine the emission properties. As specific examples, we discuss a high Q-factor, TE-TM double-mode photonic crystal cavity design that allows for direct generation of single photons at telecom wavelengths (1425 nm) starting from an InAs/GaAs quantum dot with a 950 nm transition wavelength, and a scheme for direct optical coupling between such a quantum dot and a diamond nitrogen-vacancy center at 637 nm.
Motivated by developments in quantum information science, much recent effort has been directed toward coupling individual quantum emitters to optical microcavities. Such systems can be used to produce single photons on demand, enable nonlinear optical switching at a single photon level, and implement functional nodes of a quantum network, where the emitters serve as processing nodes and photons are used for long-distance quantum communication. For many of these practical applications, it is important to develop techniques that allow one to generate outgoing single photons of desired frequency and bandwidth, enabling hybrid networks connecting different types of emitters and long-distance transmission over telecommunications wavelengths. Here, we propose a novel approach that makes use of a nonlinear optical resonator, in which the single photon originating from the atom-like emitter is directly converted into a photon with desired frequency and bandwidth using the intracavity nonlinearity. As specific examples, we discuss a high-finesse, TE-TM double-mode photonic crystal cavity design that allows for direct generation of single photons at telecom wavelengths starting from an InAs/GaAs quantum dot with a 950 nm transition wavelength, and a scheme for direct optical coupling of such a quantum dot with a diamond nitrogen-vacancy center at 637 nm.
We demonstrate a quantum interface that simultaneously converts the wavelength, bandwidth, and duration of single-photon-level pulses, enabling compatibility between disparate quantum systems. Using difference frequency generation in a lithium niobate waveguide driven by a highly chirped pump, we transform pulses from 798 nm, 5 GHz, 150 ps (quantum dot-like) to 1300 nm, 35 GHz, < 25 ps (telecom standard). This nonlinear optical time lens achieves over 80% internal conversion efficiency and compresses output pulses below detector resolution. The device offers a compact solution for integrating quantum emitters, memories, and telecom networks, with potential for further pulse shape control.
We demonstrate a quantum interface that simultaneously converts the wavelength, bandwidth, and duration of single-photon-level pulses, enabling compatibility between disparate quantum systems. Using difference frequency generation in a lithium niobate waveguide driven by a highly chirped pump, we transform pulses from 798 nm, 5 GHz, 150 ps (quantum dot-like) to 1300 nm, 35 GHz, < 25 ps (telecom standard). This nonlinear optical time lens achieves over 80% internal conversion efficiency and compresses output pulses below detector resolution. The device offers a compact solution for integrating quantum emitters, memories, and telecom networks, with potential for further pulse shape control.
Resonant enhancement of nonlinear photonic processes is critical for the scalability of applications such as long-distance entanglement generation. To implement nonlinear resonant enhancement, multiple resonator modes must be individually tuned onto a precise set of process wavelengths, which requires multiple linearly-independent tuning methods. Using coupled auxiliary resonators to indirectly tune modes in a multi-resonant nonlinear cavity is particularly attractive because it allows the extension of a single physical tuning mechanism, such as thermal tuning, to provide the required independent controls. Here we model and simulate the performance and tradeoffs of a coupled-resonator tuning scheme which uses auxiliary resonators to tune specific modes of a multi-resonant nonlinear process. Our analysis determines the tuning bandwidth for steady-state mode field intensity can significantly exceed the inter-cavity coupling rate if the total quality factor of the auxiliary resonator is higher than the multi-mode main resonator. Consequently, over-coupling a nonlinear resonator mode to improve the maximum efficiency of a frequency conversion process will simultaneously expand the auxiliary resonator tuning bandwidth for that mode, indicating a natural compatibility with this tuning scheme. We apply the model to an existing small-diameter triply-resonant ring resonator design and find that a tuning bandwidth of 136 GHz ~ 1.1 nm can be attained for a mode in the telecom band while limiting excess scattering losses to a quality factor of 10^6. Such range would span the distribution of inhomogeneously broadened quantum emitter ensembles as well as resonator fabrication variations, indicating the potential for the auxiliary resonators to enable not only low-loss telecom conversion but also the generation of indistinguishable photons in a quantum network.
Resonant enhancement of nonlinear photonic processes is critical for the scalability of applications such as long-distance entanglement generation. To implement nonlinear resonant enhancement, multiple resonator modes must be individually tuned onto a precise set of process wavelengths, which requires multiple linearly-independent tuning methods. Using coupled auxiliary resonators to indirectly tune modes in a multi-resonant nonlinear cavity is particularly attractive because it allows the extension of a single physical tuning mechanism, such as thermal tuning, to provide the required independent controls. Here we model and simulate the performance and tradeoffs of a coupled-resonator tuning scheme which uses auxiliary resonators to tune specific modes of a multi-resonant nonlinear process. Our analysis determines the tuning bandwidth for steady-state mode field intensity can significantly exceed the inter-cavity coupling rate g if the total quality factor of the auxiliary resonator is higher than the multi-mode main resonator. Consequently, over-coupling a nonlinear resonator mode to improve the maximum efficiency of a frequency conversion process will simultaneously expand the auxiliary resonator tuning bandwidth for that mode, indicating a natural compatibility with this tuning scheme. We apply the model to an existing small-diameter triply-resonant ring resonator design and find that a tuning bandwidth of 136 GHz ≈ 1.1 nm can be attained for a mode in the telecom band while limiting excess scattering losses to a quality factor of 10 6 . Such range would span the distribution of inhomogeneously broadened quantum emitter ensembles as well as resonator fabrication variations, indicating the potential for the auxiliary resonators to enable not only low-loss telecom conversion but also the generation of indistinguishable photons in a quantum network.
On-demand indistinguishable single-photon sources are essential for quantum networking and communication. Semiconductor quantum dots are among the most promising candidates, but their typical emission wavelength renders them unsuitable for use in fiber networks. Here, we present quantum frequency conversion of near-infrared photons from a bright quantum dot to the telecommunication C-band, allowing integration with existing fiber architectures. We use a custom-built, tunable 2400 nm seed laser to convert single photons from 942 nm to 1550 nm in a difference-frequency generation process. We achieve an end-to-end conversion efficiency of ≃35%, demonstrate count rates approaching 1 MHz at 1550 nm with g(2)(0)=0.043(1), and achieve Hong-Ou-Mandel (HOM) visibilities of 60%. We expect this scheme to be preferable to quantum dot sources directly emitting at telecom wavelengths for fiber-based quantum networking.