Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Optimization of Bicrystal Josephson Junctions and Arrays in a Fabry-Perot Resonator

Mang He, Alexander M. Klushin, S.L. Yan, N. Klein

Published Jun 1, 2007• 5 citations
Publisher

Abstract

We report on the investigation of the coupling mechanism of a resonant millimeter wave electromagnetic field with bicrystal Josephson junction arrays embedded in a hemispherical Fabry-Perot resonator. We have found that our high-temperature superconductor array can be modeled as a thin film grid polarizer. In agreement with this model a strong dependence of the coupling of the Josephson junctions on the polarization of the electric field in the resonator was measured. Numerical field simulations confirm this model. According to this model, the dimension and interval of the grids and the dimension of the Josephson junctions are optimized by simulations and experiments. After optimized, a maximum Josephson voltage of 28 mV for an array of 182 bicrystal junctions at a temperature of 75 K and a frequency of 74.39 GHz was achieved for the first time. Our coupling method has a strong potential to be used up to terahertz frequencies.

DOI
10.1109/tasc.2007.898140

Related papers

Arrays of high-Tc Josephson junctions in open millimeter wave resonators

Alexander M. Klushin, M. He, S.L. Yan +1 more

The authors have explored the coupling mechanism of a millimeter wave radiation to bicrystal Josephson junction arrays embedded in a hemispherical Fabry-Pérot resonator. The authors have found that their high-temperature superconductor array can be modeled as a thin film grid polarizer. In agreement with this model, a strong dependence of the coupling of the Josephson junctions on the polarization of the electric filed in the resonator was observed. The authors achieved a maximum Josephson voltage of 28mV for an array of 182 bicrystal junctions at a temperature of 75K and a frequency of 74.4GHz.

Applied Physics Letters•Dec 4, 2006•24 citations

Meandering bicrystal Josephson junction arrays in a hemispherical Fabry–Perot resonator

M He, Alexander M. Klushin, N. Klein

We have explored the coupling mechanism of a millimeter wave radiation to bicrystal Josephson junction arrays embedded in a Fabry–Perot resonator. In order to optimize the system, three-dimensional simulations and relative experiments were performed. By analyzing the results of computer simulations and experiments, we found that the layout of the array and the distance between the array and the plane mirror should minimize the effects on the electrical field E distribution in the fundamental mode of the Fabry–Perot resonator without the sample. In this case, the uniformity of the E field in the bicrystal arrays was demonstrated together with an improvement in the coupling efficiency of the mm wave irradiation to high-temperature superconductor arrays of Josephson junctions.

Superconductor Science and Technology•Oct 18, 2007•7 citations

Optimization of the coupling of mm wave power to arrays of high-TcJosephson junctions

Alexander M. Klushin, M He, M. Levitchev +2 more

We explored high-temperature superconductor Josephson junction arrays embedded in a hemispherical Fabry-Perot resonator. We compared the characteristics of three designs of arrays to achieve steps at higher voltage with a better coupling to the millimeter wave irradiation power. With an optimal design, we achieved a maximum Josephson voltage of about 0.1V for an array of 620 bicrystal junctions at a temperature of 79.2K and a frequency of 77.465 GHz. Also steps from 0.01 V up to 0.1 V were observed. Our results showed that such circuits are challenging for applications in quantum voltage metrology. It is important to note that our quasioptical coupling method can be extended up to terahertz frequencies.

Journal of Physics Conference Series•Feb 1, 2008•9 citations

Millimeter wave irradiation characteristics of high temperature superconductor bicrystal Josephson junction embedded in a Fabry-Perot resonator

Yue Hong-Wei, Yan Shao-lin, Zhou Tie-Ge +10 more

The millimeter wave irradiation characteristics of a Tl-2212 high-temperature superconducting thin film bicrystal Josephson junction embedded in a hemispherical Fabry-Perot resonator was studied. The coupling characteristics of the bicrystal Josephson junction with the Fabry-Perot resonator have been investigated experimently, showing that it was greatly affected by the factors such as the location of the sample in the open resonator, the angle between them, the pattern of the junction and the distance between the two reflecting mirrors of the resonator. The optimized coupling between Josephson junction and applied microwave was achieved by refined adjustment of the factors. In this case, 9 orders distinct Shapiro steps were observed. Taking advantage of the Fabry-Perot resonator technique, the coupling problem between high-temperature superconducting thin film Josephson junction and applied millimeter wave was well solved, which is of significance for the research on radiation and detection of millimeter wave and terahertz wave of high-temperature superconducting Josephson junction.

Acta Physica Sinica•Jan 1, 2010•1 citation

Millimeter wavelength coherent emission from high temperature superconducting bicrystal Josephson junction array

Yue Hong-Wei, Zheng Wang, Fan Bin +6 more

The experimental results of mm-wave coherent emission from a high temperature superconducting bicrystal Josephson junction array embedded in a Fabry-Perot resonator are reported in this paper.The mm-wave coherent emission from the series junction array results from the interaction of the junctions with the substrate serving as the dielectric resonator as well as the Fabry-Perot resonator.The central frequency of emission of a Josephson junction array containing 166 bicrystal junctions was 75.84 GHz,and the detected emission power was about 10 pW at 77 K.

Acta Physica Sinica•Jan 1, 2010•1 citation

Bicrystal Josephson junctions and arrays in a Fabry-Perot resonator

Alexander M. Klushin, D. M. Druzhnov, N. Klein

Full frequency locking of an array of 121 Josephson junctions was demonstrated upon millimeter wave irradiation employing a Fabry-Perot resonator at 73 GHz. This result indicates that such arrays exhibit promising properties to be utilized in quantum voltage metrology. On the other hand, the combination of such arrays with THz-Fabry Perot resonators is very challenging for developing Josephson array radiation sources for the THz frequency band.

Journal of Physics Conference Series•Jun 1, 2006•6 citations
We report on the investigation of the coupling mechanism of a resonant millimeter wave electromagnetic field with bicrystal Josephson junction arrays embedded in a hemispherical Fabry-Perot resonator. We have found that our high-temperature superconductor array can be modeled as a thin film grid polarizer. In agreement with this model a strong dependence of the coupling of the Josephson junctions on the polarization of the electric field in the resonator was measured. Numerical field simulations confirm this model. According to this model, the dimension and interval of the grids and the dimension of the Josephson junctions are optimized by simulations and experiments. After optimized, a maximum Josephson voltage of 28 mV for an array of 182 bicrystal junctions at a temperature of 75 K and a frequency of 74.39 GHz was achieved for the first time. Our coupling method has a strong potential to be used up to terahertz frequencies.
The authors have explored the coupling mechanism of a millimeter wave radiation to bicrystal Josephson junction arrays embedded in a hemispherical Fabry-Pérot resonator. The authors have found that their high-temperature superconductor array can be modeled as a thin film grid polarizer. In agreement with this model, a strong dependence of the coupling of the Josephson junctions on the polarization of the electric filed in the resonator was observed. The authors achieved a maximum Josephson voltage of 28mV for an array of 182 bicrystal junctions at a temperature of 75K and a frequency of 74.4GHz.
We have explored the coupling mechanism of a millimeter wave radiation to bicrystal Josephson junction arrays embedded in a Fabry–Perot resonator. In order to optimize the system, three-dimensional simulations and relative experiments were performed. By analyzing the results of computer simulations and experiments, we found that the layout of the array and the distance between the array and the plane mirror should minimize the effects on the electrical field E distribution in the fundamental mode of the Fabry–Perot resonator without the sample. In this case, the uniformity of the E field in the bicrystal arrays was demonstrated together with an improvement in the coupling efficiency of the mm wave irradiation to high-temperature superconductor arrays of Josephson junctions.
We explored high-temperature superconductor Josephson junction arrays embedded in a hemispherical Fabry-Perot resonator. We compared the characteristics of three designs of arrays to achieve steps at higher voltage with a better coupling to the millimeter wave irradiation power. With an optimal design, we achieved a maximum Josephson voltage of about 0.1V for an array of 620 bicrystal junctions at a temperature of 79.2K and a frequency of 77.465 GHz. Also steps from 0.01 V up to 0.1 V were observed. Our results showed that such circuits are challenging for applications in quantum voltage metrology. It is important to note that our quasioptical coupling method can be extended up to terahertz frequencies.
The millimeter wave irradiation characteristics of a Tl-2212 high-temperature superconducting thin film bicrystal Josephson junction embedded in a hemispherical Fabry-Perot resonator was studied. The coupling characteristics of the bicrystal Josephson junction with the Fabry-Perot resonator have been investigated experimently, showing that it was greatly affected by the factors such as the location of the sample in the open resonator, the angle between them, the pattern of the junction and the distance between the two reflecting mirrors of the resonator. The optimized coupling between Josephson junction and applied microwave was achieved by refined adjustment of the factors. In this case, 9 orders distinct Shapiro steps were observed. Taking advantage of the Fabry-Perot resonator technique, the coupling problem between high-temperature superconducting thin film Josephson junction and applied millimeter wave was well solved, which is of significance for the research on radiation and detection of millimeter wave and terahertz wave of high-temperature superconducting Josephson junction.
The experimental results of mm-wave coherent emission from a high temperature superconducting bicrystal Josephson junction array embedded in a Fabry-Perot resonator are reported in this paper.The mm-wave coherent emission from the series junction array results from the interaction of the junctions with the substrate serving as the dielectric resonator as well as the Fabry-Perot resonator.The central frequency of emission of a Josephson junction array containing 166 bicrystal junctions was 75.84 GHz,and the detected emission power was about 10 pW at 77 K.