Rapid Single Flux Quantum (RSFQ) logic is well-known for its ultra-high switching speed and extremely low power consumption. In this paper, we present two original experiments to demonstrate that it's also a reliable technology and its reliability is sufficient even for such a large-scale system as a proposed petaflops-scale HTMT computer. We have measured the bit error rate (BER) for a circular register of inverters representing a critical path of a 64-bit integer adder, and timing jitter in a 200 Josephson junction (JJ) long transmission line, imitating a branch of a clock distribution tree, both being important and representative building blocks of the HTMT computer. For the adder critical path we have demonstrated the highest clock frequency of 17 GHz, latency of 860 ps and BER of 10/sup -19/ for 3.5 /spl mu/m technology of HYPRES, Inc. The value of timing jitter was 200 fs per JJ for 1.5 /spl mu/m technology of TRW, Inc. These figures are in good agreement with our simulations.
Rapid Single Flux Quantum (RSFQ) logic is well-known for its ultra-high switching speed and extremely low power consumption. In this paper, we present two original experiments to demonstrate that it's also a reliable technology and its reliability is sufficient even for such a large-scale system as a proposed petaflops-scale HTMT computer. We have measured the bit error rate (BER) for a circular register of inverters representing a critical path of a 64-bit integer adder, and timing jitter in a 200 Josephson junction (JJ) long transmission line, imitating a branch of a clock distribution tree, both being important and representative building blocks of the HTMT computer. For the adder critical path we have demonstrated the highest clock frequency of 17 GHz, latency of 860 ps and BER of 10/sup -19/ for 3.5 /spl mu/m technology of HYPRES, Inc. The value of timing jitter was 200 fs per JJ for 1.5 /spl mu/m technology of TRW, Inc. These figures are in good agreement with our simulations.
We have carried out measurements of bit error rate (BER) of Rapid Single-Flux-Quantum (RSFQ) XOR gates with various nominal dc power supply voltages (from 0.1 V to 1.0 mV), operating at speeds up to 25 GHz. (For these gates, implemented using HYPRES' standard, 3.5-/spl mu/m, 10 /spl mu/A//spl mu/m/sup 2/ Nb-trilayer process, this speed is close to maximum.) A special on-chip RSFQ test circuit allowed high-speed measurements of BER in the range from 10/sup -9/ to 10/sup -13/ to be carried out. As a result of these experiments, a new type of thermal-fluctuation-induced digital errors in RSFQ circuits has been identified. These "timing" errors arise at high speed due to time jitter of data and clock pulses. We have developed a simple theory of these errors which allows a fair description of the experimental data. The theory shows that in some cases the timing errors may be an important factor limiting speed performance of RSFQ circuitry. Nevertheless, our XOR gates could operate at 25 GHz with BER below 10/sup -13/ at the standard temperature (4.2 K) at any dc power supply voltage in our range. For the lowest voltage (0.1 Volt) the calculated static power dissipation in the gate was as low as 23 nanowatts, lower than the unavoidable dynamic dissipation (43 nanowatts).
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
Several novel circuits of the rapid single-flux-quantum (RSFQ) family of Josephson-junction digital devices have been designed, fabricated using a 2.5- mu m 1000-A/cm/sup 2/ Nb trilayer technology, and tested at low frequencies. Numerical simulation and measurements have shown that these circuits have considerably wider parameter margins, due to application of several novel design methods. The authors have also carried out an experiment to measure the rate of errors in a simple RSFQ circuit including an inverter, confluence buffer, and Josephson transmission line. Near the middle of the parameter window at 4.2 K, the error probability was definitely lower than 3*10/sup -15/ per logic operation, despite experimentation with rudimentary shielding and filtering.>
Error rates of rapid-single-flux-quantum (RSFQ) shift register memories were investigated using a high-speed error-rate measurement system in order to demonstrate their reliability and stability. We designed and implemented an 8 times 8-bit shift register memory using the CONNECT cell library and the SRL 2.5 kA/cm2Nb process. The total number of Josephson junctions including the test system is 4184, and the circuit area is 2.1 mm times 3.2 mm. We measured the error rates of every storage node by reading out the data 216times at the clock frequency of 16 GHz. The measured error rates were lower than 10-10with DC bias margin better than plusmn5%.
AbstractSuperconducting digital technology based on Rapid Single Flux Quantum (RSFQ) logic offers a 50 times faster clock rate and 100 times less on chip power consumption than today's mainstream semiconductor electronics. This technology is attractive for many applications and in particular for Digital Signal Processing (DSP). The applications of the RSFQ DSPs are numerous and include multi-user detection in spread spectrum system, channel equalization for Multi-in, Multi-out (MIMO) systems, and blind detection and signal tracking for signal intelligence.At Chalmers we are developing a hybrid DSP with target performance of 30 giga operations per second. It consists of an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory, and an external semiconductor memory. The development of the complex high speed cryogenic digital system requires interface, packaging and testing solutions. The main difficulties are due to the 4 K operational temperature, the high magnetic field sensitivity of the RSFQ circuits, the multi-channel high bandwidth interface required in the hybrid architecture, and the high speed RSFQ digital core. The key steps towards addressing each of these problems are the subject of this thesis. The main emphasis is put on the experimental testing and interfacing of superconductor electronics. A large part of the work is connected to the experimental verification of DSP components and their incremental improvement towards functionality. The RSFQ circuits tested were fabricated using the four-metal layer VLSI processes available from NGST(8 kA/cm^2 Josephson junction critical current) and HYPRES (both 1 kA/cm^2 and HYPRES 4.5 kA/cm^2. The main results of the work are demonstrations of the RSFQ cache memory with more than 2,000 Josephson junctions, 33.5 GHz operation of the digital clock controller, and 20.48 GHz operation of the autocorrelator. In addition, various experiments have been done for investigation of parasitic effects in RSFQ circuits such as flux trapping and influence of the high current bias lines.At the final stage of the work, a unique high bandwidth 4 K cryocooler based experimental setup has been developed. The system, developed in close cooperation with Hypres Inc. USA, has 40 high speed I/Os with bandwidth of 2 Gbps, 64 DC bias channels, 4 high frequency clock lines, and 4 auxiliary control lines. It supports exchangeable test units for 10 mm x 10 mm and 20 mm x 20 mm Multi Chip Module (MCM) carriers. The availability of such a system is critical to demonstration of the hybrid DSP prototype and future commercialization.