© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Journal of Physics Conference Series

Low-noise RSFQ circuits for a Josephson Qubit control

M. Khabipov, D Balashov, E. Tolkacheva, Alexander B Zorin

Published Feb 1, 2008• 1 citation

Abstract

We address the problem of reducing the noise of an RSFQ circuit, which may significantly decohere a Josephson qubit in the case of integration of these circuits. The main sources of such noise in traditional RSFQ circuits are low-ohmic shunting resistors ensuring sufficiently high damping. We developed the toggle flip-flop (TFF) cells with weakly-damped individual junctions due to high-ohmic shunts. The dominant part of necessary damping in this circuit was realized by applying an additional, so-called 'perpendicular', low-ohmic resistor connecting the centre of the storing TFF inductance to ground. The TFF circuits with junctions shunted by 50 Ω resistors and perpendicular resistor of 1.5 Ω, ensuring suppression of noise by more than one order, have been fabricated and demonstrated an operation range of ±20%. In order to make the circuit compact and, therefore, less sensitive to external noise, the passive frozen-flux-based phase shifting elements, replacing large quantizing inductances, were also included. The circuits were fabricated using PTB Nb trilayer process with critical current density j c = 100 A/cm 2 .

DOI: 10.1088/1742-6596/97/1/012041

Related papers

Single flux quantum circuits with damping based on dissipative transmission lines

E M Tolkacheva, D V Balashov, M I Khabipov +1 more

We propose and demonstrate the functioning of a special Rapid Single Flux Quantum (RSFQ) circuit with frequency-dependent damping. This damping is achieved by shunting individual Josephson junctions by pieces of open-ended RC transmission lines. Our circuit includes a toggle flip-flop cell, Josephson transmission lines transferring single flux quantum pulses to and from this cell, as well as DC/SFQ and SFQ/DC converters. Due to the desired frequency-dispersion in the RC line shunts which ensures sufficiently low noise at low frequencies, such circuits are well-suited for integrating with the flux/phase Josephson qubit and enable its efficient control.

arXiv:0804.0442•Superconductor Science and Technology•Oct 17, 2008•3 citations

Analyzing the switching errors of RSFQ-circuits

Olaf Mielke, Thomas Ortlepp

The Rapid Single Flux Quantum electronics is a superconducting, naturally digital circuit family which is currently close to getting commercially applied.RSFQ is outstanding by its very low switching energy resulting in a very low power consumption which is the reason for a significant influence on thermal noise.For industrial applications a certain noise immunity is required which is still a challenge especially for circuits of higher complexity.In superconducting electronics resistors are the only on-chip noise sources.We analyzed the influence of each individual resistor in a toggle Flip-Flop circuit to the overall bit-error rate.The shunt resistors of comparator structures are the dominant noise sources and bias resistors have almost no influence.We analyzed in detail the types of thermal introduced switching errors of an toggle Flip-Flop which was optimized with respect to the fabrication yield.Simulation studies were accomplished to investigate the influence of circuit parameters on quality and on quantity of switching errors.By identifying and manipulating the parameters with the most significant influence on the noise susceptibility an enhanced noise immunity of the device can be achieved.The goal is to improve the robustness of RSFQ circuits against the influence of thermal noise for an specific topology by changing the circuit parameters of the device.

USB-Flash-Ausg.:#R#<br/>Information technology and electrical engineering - devices and systems, materials and technologies for the future : 54. IWK, Internationales Wissenschaftliches Kolloquium ; proceedings ; 07 - 10 September 2009 / Faculty of Electrical and Information Technology, Technische Universität Ilmenau. - Ilmenau : Verl. ISLE, 2009. - ISBN 978-3-938843-45-1•Jan 1, 2009•0 citations

Reduced Probability of Noise Introduced Malfunction in RSFQ Circuits by Implementing Intrinsic $\pi$-Phaseshifter

Olaf Mielke, Thomas Ortlepp, Pascal Febvre +1 more

The rapid single flux quantum electronics is characterized by a low switching energy, which makes it susceptible to noise introduced bit-errors. For industrial applications a certain noise immunity is required which is still a challenge especially for circuits of higher complexity. We analysed the influence of each individual resistor in a toggle flip-flop circuit to the overall bit-error rate. The shunt resistors of comparator structures are the dominant noise sources and bias resistors have almost no influence.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•8 citations

Passive Phase Shifter for Superconducting Josephson Circuits

D Balashov, Boyko Dimov, M. Khabipov +6 more

Quantized values of magnetic flux trapped in a superconducting loop enable a new type of passive phase shifting elements. These elements can be incorporated into digital Josephson circuits making their design compact. We have proven the functionality of such phase shifters fabricated in conventional Nb/Al trilayer technology. We report on the successful low speed operation of a rapid single flux quantum toggle flip-flop circuit with the integrated passive pi-phase shifting element.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•22 citations

Noise reduction in RSFQ logic gates for increasing operating speed and widening margins

Yuma Kita, Matsuoka Hiromi, Shigeyuki Miyajima +2 more

We present a new design technique of rapid single-flux-quantum (RSFQ) logic gates for low-noise, high-speed operation. In this study, we propose the use of a damping resistor shared with a junction pair composing a comparator, in addition to their individual shunt resistors increased from the standard values. We analyzed timing characteristics and bit error rates (BERs) of several RSFQ flip-flops composed of the proposed comparators using numerical simulation. The proposed comparator showed reduced timing jitter by ~5% in association with small delay time, sharpened BER curves, and improvement in operating margins by 2-3% compared to the standard design. We fabricated 2-bit shift registers using the noise reduction technique. We obtained sharp BER curves from the measurement. The proposed method indicated that it gave wide margins.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•1 citation

A single flux quantum circuit with a ferromagnet-based Josephson π-junction

M. Khabipov, D Balashov, F. Maibaum +5 more

We report on the functionality of a Nb-based superconducting single flux quantum (SFQ) toggle flip-flop (TFF) circuit, comprising a complementary superconductor–ferromagnet–superconductor (SFS) Josephson π-junction. The SFS junction was used as a phase shifting element inserted in the storage loop of the TFF. The fabricated circuits demonstrated correct functionality with the operation parameter ranges of ± 20%. The application of SFS π-junctions makes the SFQ circuits very compact, may substantially improve their stability, and may also be suitable for integration with Josephson quantum circuits (qubits).

Superconductor Science and Technology•Mar 19, 2010•66 citations

We address the problem of reducing the noise of an RSFQ circuit, which may significantly decohere a Josephson qubit in the case of integration of these circuits. The main sources of such noise in traditional RSFQ circuits are low-ohmic shunting resistors ensuring sufficiently high damping. We developed the toggle flip-flop (TFF) cells with weakly-damped individual junctions due to high-ohmic shunts. The dominant part of necessary damping in this circuit was realized by applying an additional, so-called 'perpendicular', low-ohmic resistor connecting the centre of the storing TFF inductance to ground. The TFF circuits with junctions shunted by 50 Ω resistors and perpendicular resistor of 1.5 Ω, ensuring suppression of noise by more than one order, have been fabricated and demonstrated an operation range of ±20%. In order to make the circuit compact and, therefore, less sensitive to external noise, the passive frozen-flux-based phase shifting elements, replacing large quantizing inductances, were also included. The circuits were fabricated using PTB Nb trilayer process with critical current density j c = 100 A/cm 2 .

We propose and demonstrate the functioning of a special Rapid Single Flux Quantum (RSFQ) circuit with frequency-dependent damping. This damping is achieved by shunting individual Josephson junctions by pieces of open-ended RC transmission lines. Our circuit includes a toggle flip-flop cell, Josephson transmission lines transferring single flux quantum pulses to and from this cell, as well as DC/SFQ and SFQ/DC converters. Due to the desired frequency-dispersion in the RC line shunts which ensures sufficiently low noise at low frequencies, such circuits are well-suited for integrating with the flux/phase Josephson qubit and enable its efficient control.

The Rapid Single Flux Quantum electronics is a superconducting, naturally digital circuit family which is currently close to getting commercially applied.RSFQ is outstanding by its very low switching energy resulting in a very low power consumption which is the reason for a significant influence on thermal noise.For industrial applications a certain noise immunity is required which is still a challenge especially for circuits of higher complexity.In superconducting electronics resistors are the only on-chip noise sources.We analyzed the influence of each individual resistor in a toggle Flip-Flop circuit to the overall bit-error rate.The shunt resistors of comparator structures are the dominant noise sources and bias resistors have almost no influence.We analyzed in detail the types of thermal introduced switching errors of an toggle Flip-Flop which was optimized with respect to the fabrication yield.Simulation studies were accomplished to investigate the influence of circuit parameters on quality and on quantity of switching errors.By identifying and manipulating the parameters with the most significant influence on the noise susceptibility an enhanced noise immunity of the device can be achieved.The goal is to improve the robustness of RSFQ circuits against the influence of thermal noise for an specific topology by changing the circuit parameters of the device.

Reduced Probability of Noise Introduced Malfunction in RSFQ Circuits by Implementing Intrinsic

\pi

-Phaseshifter

The rapid single flux quantum electronics is characterized by a low switching energy, which makes it susceptible to noise introduced bit-errors. For industrial applications a certain noise immunity is required which is still a challenge especially for circuits of higher complexity. We analysed the influence of each individual resistor in a toggle flip-flop circuit to the overall bit-error rate. The shunt resistors of comparator structures are the dominant noise sources and bias resistors have almost no influence.

We present a new design technique of rapid single-flux-quantum (RSFQ) logic gates for low-noise, high-speed operation. In this study, we propose the use of a damping resistor shared with a junction pair composing a comparator, in addition to their individual shunt resistors increased from the standard values. We analyzed timing characteristics and bit error rates (BERs) of several RSFQ flip-flops composed of the proposed comparators using numerical simulation. The proposed comparator showed reduced timing jitter by ~5% in association with small delay time, sharpened BER curves, and improvement in operating margins by 2-3% compared to the standard design. We fabricated 2-bit shift registers using the noise reduction technique. We obtained sharp BER curves from the measurement. The proposed method indicated that it gave wide margins.

We report on the functionality of a Nb-based superconducting single flux quantum (SFQ) toggle flip-flop (TFF) circuit, comprising a complementary superconductor–ferromagnet–superconductor (SFS) Josephson π-junction. The SFS junction was used as a phase shifting element inserted in the storage loop of the TFF. The fabricated circuits demonstrated correct functionality with the operation parameter ranges of ± 20%. The application of SFS π-junctions makes the SFQ circuits very compact, may substantially improve their stability, and may also be suitable for integration with Josephson quantum circuits (qubits).