Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Hybrid Semiconductor-Superconductor Fast-Readout Memory for Digital RF Receivers

Oleg A. Mukhanov, Alex F. Kirichenko, Timur V. Filippov, Saad M. Sarwana

Published Nov 23, 2010• 16 citations
Publisher

Abstract

Results of the development of a new type of a hybrid memory for superconducting Digital-RF receivers supporting 30 Gbps memory readout speed are presented. The main feature of this memory is a combination of a high capacity room-temperature memory and a high speed on-chip superconductive cache in order to provide digital waveform templates for Digital-RF signal processing. As a room-temperature high-capacity memory with fast readout, we selected Sympuls pattern generator BMG 30 G-64 M capable of producing a 30 Gbps serial data stream of programmable pattern of 67,108,864 bits. We designed, fabricated, and tested an on-chip cache which receives high-speed template serial data from the room temperature memory and converts it into a stream of 3-bit words of template of local oscillator (LO) for digital mixer. We integrated the memory with a 1 × 3-bit digital I/Q mixer (1-bit digitized RF stream multiplied by 3-bit digital LO).

DOI
10.1109/tasc.2010.2089409

Related papers

Low-Power High-Speed Hybrid Temperature Heterogeneous Technology Digital Data Link

Deepnarayan Gupta, Joseph C. Bardin, Amol Inamdar +6 more

High-speed digital data links from 4-K superconductor electronics to room temperature are challenging due to the fact that energy/bit for single flux quantum logic is many (six) orders of magnitude lower than that of standard room-temperature logic. Our approach of building an energy-efficient high-speed data link involves a joint electrical-thermal design of a temperature-distributed architecture using different electronic technologies. This differential digital data link design involves superconductor, multiple cryogenic semiconductor and additional room-temperature semiconductor circuitry. The current design involves three cryogenic semiconductor ICs for integration with a multistage cryocooled digital system. The first cryogenic semiconductor IC is designed to operate at 4 K with a power consumption of 0.3 mW and interface directly with the superconductor differential single flux quantum/dc drivers. For testing it, a superconductor carrier chip containing an analog-to-digital converter has been designed for the HYPRES dual-$J_{c}$(4.5 and 20$\hbox{kA/cm}^{2}$) fabrication process.

IEEE Transactions on Applied Superconductivity•Apr 5, 2013•19 citations

Experimental Verification of Superconductor Digital Circuits

Henrik Engseth

AbstractSuperconducting digital technology based on Rapid Single Flux Quantum (RSFQ) logic offers a 50 times faster clock rate and 100 times less on chip power consumption than today's mainstream semiconductor electronics. This technology is attractive for many applications and in particular for Digital Signal Processing (DSP). The applications of the RSFQ DSPs are numerous and include multi-user detection in spread spectrum system, channel equalization for Multi-in, Multi-out (MIMO) systems, and blind detection and signal tracking for signal intelligence.At Chalmers we are developing a hybrid DSP with target performance of 30 giga operations per second. It consists of an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory, and an external semiconductor memory. The development of the complex high speed cryogenic digital system requires interface, packaging and testing solutions. The main difficulties are due to the 4 K operational temperature, the high magnetic field sensitivity of the RSFQ circuits, the multi-channel high bandwidth interface required in the hybrid architecture, and the high speed RSFQ digital core. The key steps towards addressing each of these problems are the subject of this thesis. The main emphasis is put on the experimental testing and interfacing of superconductor electronics. A large part of the work is connected to the experimental verification of DSP components and their incremental improvement towards functionality. The RSFQ circuits tested were fabricated using the four-metal layer VLSI processes available from NGST(8 kA/cm^2 Josephson junction critical current) and HYPRES (both 1 kA/cm^2 and HYPRES 4.5 kA/cm^2. The main results of the work are demonstrations of the RSFQ cache memory with more than 2,000 Josephson junctions, 33.5 GHz operation of the digital clock controller, and 20.48 GHz operation of the autocorrelator. In addition, various experiments have been done for investigation of parasitic effects in RSFQ circuits such as flux trapping and influence of the high current bias lines.At the final stage of the work, a unique high bandwidth 4 K cryocooler based experimental setup has been developed. The system, developed in close cooperation with Hypres Inc. USA, has 40 high speed I/Os with bandwidth of 2 Gbps, 64 DC bias channels, 4 high frequency clock lines, and 4 auxiliary control lines. It supports exchangeable test units for 10 mm x 10 mm and 20 mm x 20 mm Multi Chip Module (MCM) carriers. The availability of such a system is critical to demonstration of the hybrid DSP prototype and future commercialization.

•Jan 1, 2005•0 citations

Superconducting digital-RF receiver with high-speed data recording capability

A. Erik Lehmann, Dmitri E. Kirichenko, Alex F. Kirichenko +2 more

A superconducting digital-RF receiver with high ingest-rate data recording capability has been developed. The data recorder unit uses standard PC components with state-of-the-art solid-state drives and interfaces with the superconductor analog-to-digital converter (ADC) through a commercial FPGA board. High-speed data ingest rates exceeding 3.2 GBps have been demonstrated successfully with single-bit ADCs clocked up to 27.52 GHz. Long data acquisitions are useful for analyzing ADC performance in terms of stability and linearity. A data analysis program has also been developed to extract performance parameters and visualize digitized signals in frequency and time domains.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•2 citations

Design of superconductor digital circuits for a 30 GHz DSP and for interface to qubits

Samuel Intiso

Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.

•Jan 1, 2006•0 citations

Superconductor Digital Signal Processor

Irina Kataeva

Superconductor digital technology based on Rapid Single Flux Quantum logic (RSFQ) offers more than 50 times gain in speed and more than 100 reduction in power consumption over mainstream CMOS devices. However, the necessity of cooling down to 4 K and modest degree of integration density currently available mean that employing RSFQ is reasonable only for the tasks that are impossible or ineffective to implement in CMOS technology. One of the promising applications of the RSFQ technology is Digital Signal Processing (DSP) for telecommunications. Interference cancellation is a bottleneck for all existing systems in terms of the performance gain that is theoretically possible and technically realizable using conventional technology. The crucial factor is computational complexity required to handle multiple access interference. The general approach is to compute the interference using available data about propagation channels and then either remove it from received signal or use to predistort the transmitted signal. Computation of the interference matrix can easily fall into 100 Gops range, furthermore, the most e±cient algorithms are based on successive iterations. This requires not only high overall performance of the DSP but also high actual clock rate.This thesis reports a proposed architecture of an RSFQ Successive Interference Canceller and a design of an RSFQ Digital Signal Processor based on hybrid RSFQ-CMOS memory suitable for a general matrix on matrix multiplication algorithm. The processor consists of an RSFQ Multiply-Accumulate Unit, memory caches and a synchronization block, partitioned into multiple chips, and a large CMOS memory.The complexity of the RSFQ DSP is 10x10 multiplication, rounding to 14 bits, 18 bits accumulator length and 3.7 Kb memory cache. In order to implement the RSFQ DSP, we have developed approach to simulate and describe the RSFQ circuits using VHDL. The maximum simulated clock frequency is equal to 24 GHz for Hypres 4.5 kA/cm2 process and optimum communication bandwidth with CMOS memory is 2 Gbps.Components of the processor such as 4x4 two's complement and 5x5 parallel multipliers, 4x5, 20x5 and 4x15 parallel shift registers, a 5-bit serial adder have been designed and experimentally tested. The simplified version of the RSFQ DSP consisting of a 4x4 MAC with rounding to 5 bits and 17x6 memory caches has been designed for Hypres 4.5 kA/cm2 process and fabricated.

•Jan 1, 2007•0 citations

Superconductor Digital Receiver Components

Alex F. Kirichenko, Saad M. Sarwana, Deepnarayan Gupta +1 more

We have developed and experimentally demonstrated several new RSFQ circuits, designed as components for digital receivers that are being developed by HYPRES. The first circuit is a digital phase generator, which produces a periodic digital signal with a controllable phase shift. This signal is obtained by decimation of an external high frequency signal by a factor of 1024, and provides a controllable phase shift with digital precision of /spl pi//512. The second circuit, a precise digital static frequency divider, is capable of dividing of an input signal frequency by any integer value between 1 and 1024. The third circuit is a digital quadrature mixer performing digital downconversion of bit-stream data. This report presents results of experimental evaluation of these circuits at speeds in excess of 30 GHz.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•19 citations
Results of the development of a new type of a hybrid memory for superconducting Digital-RF receivers supporting 30 Gbps memory readout speed are presented. The main feature of this memory is a combination of a high capacity room-temperature memory and a high speed on-chip superconductive cache in order to provide digital waveform templates for Digital-RF signal processing. As a room-temperature high-capacity memory with fast readout, we selected Sympuls pattern generator BMG 30 G-64 M capable of producing a 30 Gbps serial data stream of programmable pattern of 67,108,864 bits. We designed, fabricated, and tested an on-chip cache which receives high-speed template serial data from the room temperature memory and converts it into a stream of 3-bit words of template of local oscillator (LO) for digital mixer. We integrated the memory with a 1 × 3-bit digital I/Q mixer (1-bit digitized RF stream multiplied by 3-bit digital LO).
High-speed digital data links from 4-K superconductor electronics to room temperature are challenging due to the fact that energy/bit for single flux quantum logic is many (six) orders of magnitude lower than that of standard room-temperature logic. Our approach of building an energy-efficient high-speed data link involves a joint electrical-thermal design of a temperature-distributed architecture using different electronic technologies. This differential digital data link design involves superconductor, multiple cryogenic semiconductor and additional room-temperature semiconductor circuitry. The current design involves three cryogenic semiconductor ICs for integration with a multistage cryocooled digital system. The first cryogenic semiconductor IC is designed to operate at 4 K with a power consumption of 0.3 mW and interface directly with the superconductor differential single flux quantum/dc drivers. For testing it, a superconductor carrier chip containing an analog-to-digital converter has been designed for the HYPRES dual-JcJ_{c}Jc​(4.5 and 20kA/cm2\hbox{kA/cm}^{2}kA/cm2) fabrication process.
AbstractSuperconducting digital technology based on Rapid Single Flux Quantum (RSFQ) logic offers a 50 times faster clock rate and 100 times less on chip power consumption than today's mainstream semiconductor electronics. This technology is attractive for many applications and in particular for Digital Signal Processing (DSP). The applications of the RSFQ DSPs are numerous and include multi-user detection in spread spectrum system, channel equalization for Multi-in, Multi-out (MIMO) systems, and blind detection and signal tracking for signal intelligence.At Chalmers we are developing a hybrid DSP with target performance of 30 giga operations per second. It consists of an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory, and an external semiconductor memory. The development of the complex high speed cryogenic digital system requires interface, packaging and testing solutions. The main difficulties are due to the 4 K operational temperature, the high magnetic field sensitivity of the RSFQ circuits, the multi-channel high bandwidth interface required in the hybrid architecture, and the high speed RSFQ digital core. The key steps towards addressing each of these problems are the subject of this thesis. The main emphasis is put on the experimental testing and interfacing of superconductor electronics. A large part of the work is connected to the experimental verification of DSP components and their incremental improvement towards functionality. The RSFQ circuits tested were fabricated using the four-metal layer VLSI processes available from NGST(8 kA/cm^2 Josephson junction critical current) and HYPRES (both 1 kA/cm^2 and HYPRES 4.5 kA/cm^2. The main results of the work are demonstrations of the RSFQ cache memory with more than 2,000 Josephson junctions, 33.5 GHz operation of the digital clock controller, and 20.48 GHz operation of the autocorrelator. In addition, various experiments have been done for investigation of parasitic effects in RSFQ circuits such as flux trapping and influence of the high current bias lines.At the final stage of the work, a unique high bandwidth 4 K cryocooler based experimental setup has been developed. The system, developed in close cooperation with Hypres Inc. USA, has 40 high speed I/Os with bandwidth of 2 Gbps, 64 DC bias channels, 4 high frequency clock lines, and 4 auxiliary control lines. It supports exchangeable test units for 10 mm x 10 mm and 20 mm x 20 mm Multi Chip Module (MCM) carriers. The availability of such a system is critical to demonstration of the hybrid DSP prototype and future commercialization.
A superconducting digital-RF receiver with high ingest-rate data recording capability has been developed. The data recorder unit uses standard PC components with state-of-the-art solid-state drives and interfaces with the superconductor analog-to-digital converter (ADC) through a commercial FPGA board. High-speed data ingest rates exceeding 3.2 GBps have been demonstrated successfully with single-bit ADCs clocked up to 27.52 GHz. Long data acquisitions are useful for analyzing ADC performance in terms of stability and linearity. A data analysis program has also been developed to extract performance parameters and visualize digitized signals in frequency and time domains.
Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.
Superconductor digital technology based on Rapid Single Flux Quantum logic (RSFQ) offers more than 50 times gain in speed and more than 100 reduction in power consumption over mainstream CMOS devices. However, the necessity of cooling down to 4 K and modest degree of integration density currently available mean that employing RSFQ is reasonable only for the tasks that are impossible or ineffective to implement in CMOS technology. One of the promising applications of the RSFQ technology is Digital Signal Processing (DSP) for telecommunications. Interference cancellation is a bottleneck for all existing systems in terms of the performance gain that is theoretically possible and technically realizable using conventional technology. The crucial factor is computational complexity required to handle multiple access interference. The general approach is to compute the interference using available data about propagation channels and then either remove it from received signal or use to predistort the transmitted signal. Computation of the interference matrix can easily fall into 100 Gops range, furthermore, the most e±cient algorithms are based on successive iterations. This requires not only high overall performance of the DSP but also high actual clock rate.This thesis reports a proposed architecture of an RSFQ Successive Interference Canceller and a design of an RSFQ Digital Signal Processor based on hybrid RSFQ-CMOS memory suitable for a general matrix on matrix multiplication algorithm. The processor consists of an RSFQ Multiply-Accumulate Unit, memory caches and a synchronization block, partitioned into multiple chips, and a large CMOS memory.The complexity of the RSFQ DSP is 10x10 multiplication, rounding to 14 bits, 18 bits accumulator length and 3.7 Kb memory cache. In order to implement the RSFQ DSP, we have developed approach to simulate and describe the RSFQ circuits using VHDL. The maximum simulated clock frequency is equal to 24 GHz for Hypres 4.5 kA/cm2 process and optimum communication bandwidth with CMOS memory is 2 Gbps.Components of the processor such as 4x4 two's complement and 5x5 parallel multipliers, 4x5, 20x5 and 4x15 parallel shift registers, a 5-bit serial adder have been designed and experimentally tested. The simplified version of the RSFQ DSP consisting of a 4x4 MAC with rounding to 5 bits and 17x6 memory caches has been designed for Hypres 4.5 kA/cm2 process and fabricated.
We have developed and experimentally demonstrated several new RSFQ circuits, designed as components for digital receivers that are being developed by HYPRES. The first circuit is a digital phase generator, which produces a periodic digital signal with a controllable phase shift. This signal is obtained by decimation of an external high frequency signal by a factor of 1024, and provides a controllable phase shift with digital precision of /spl pi//512. The second circuit, a precise digital static frequency divider, is capable of dividing of an input signal frequency by any integer value between 1 and 1024. The third circuit is a digital quadrature mixer performing digital downconversion of bit-stream data. This report presents results of experimental evaluation of these circuits at speeds in excess of 30 GHz.