Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

λ/2 fringe-spacing interferometer

Hugues Guillet de Chatellus, Jean Paul Pique

Published Mar 6, 2009• 8 citations
Publisher

Abstract

The precision of interferometry is directly linked to the fringe spacing of the recorded interferogram. Whereas all interferometric devices show a fringe spacing equal to a wavelength of the laser light we present a novel scheme of a two-beam interferometer exhibiting a fringe spacing reduced by a factor of 2; the direct detection of the beat signal is replaced with the monitoring of the fluorescence of a twofold degenerate atomic system resonant with the laser. The lambda/2 fringe spacing in the fluorescence signal is demonstrated with a hot sodium vapor excited by a broadband laser tuned to the D1 line. In the saturation regime, the dark fringes are expected to be extremely narrow, leading to the possibility of nanoscale displacement measurements or atom localization.

DOI
10.1364/ol.34.000755

Related papers

A high resolution anharmonic λ/2 fringe spacing interferometer

Hugues Guillet de Chatellus, Jean Paul Pique

Here we present an interferometer where the fringe spacing is reduced by a factor of two and where the width of a fringe can be extremely narrow, leading to potential applications in very precise displacement measurement. Our interferometer is based on elementary aspects of atomic physics. The laser wavelength is tuned to an atomic transition (i.e. two-fold degenerate two level system). The laser field is initially polarized at 45Aring and sent to a polarizing beam splitter. Vertical and horizontal polarizations experience a relative phase shift and are recombined at the output. We present an experimental demonstration of such an interferometer by exciting a sodium vapour cell on the D1line. The problem posed by the hyperfine structure is solved by exciting the whole Doppler-hyperfine transition by means of a dye frequency-shifted feedback laser delivering a 3 GHz broad and continuous spectrum. Both the lambda/2 periodicity and the anharmonic behaviour have been recorded on the fluorescence signal.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2009•0 citations

Hot Beats and Tune Outs: Atom Interferometry with Laser-cooled Lithium

Kayleigh Cassella

Ushered forth by advances in time and frequency metrology, atom interferometry remains an indispensable measurement tool in atomic physics due to its precision and versatility. A sequence of four $\\pi/2$ beam splitter pulses can create either an interferometer sensitive to the atom's recoil frequency when the momentum imparted by the light reverses direction between pulse pairs or, when constructed from pulses without such reversal, sensitive to the perturbing potential from an external optical field. Here, we demonstrate the first atom interferometer with laser-cooled lithium, advantageous for its low mass and simple atomic structure. We study both a recoil-sensitive Ramsey-Bord\\'e interferometer and interferometry sensitive to the dynamic polarizability of the ground state of lithium. Recoil-sensitive Ramsey-Bord\\'e interferometry benefits from lithium's high recoil frequency, a consequence of its low mass. At an interrogation time of 10 ms, a Ramsey-Bord\\'e lithium interferometer could achieve sensitivities comparable to those realized at much longer times with heavier alkali atoms. However, in contrast with other atoms that are used for atom interferometry, lithium's unresolved excited-state hyperfine structure precludes the the cycling transition necessary for efficient cooling. Without sub-Doppler cooling techniques. As as result, a lithium atomic gas is typically laser cooled to temperatures around 300 $\\mu$K, above the Doppler limit, and well above the recoil temperature of 6 $\\mu$K. This higher temperature gas expands rapidly during the operation of an atom interferometer, limiting the experimental interrogation time and preventing spatially resolved detection. In this work, a light-pulse lithium matter-wave interferometer is demonstrated in spite of these limitation. Two-photon Raman interferometer pulses coherently couple the atom's spin and momentum and are thus able to spectrally resolve the outputs. These fast pulses drive conjugate interferometers simultaneously which beat with a fast frequency component proportional to the atomic recoil frequency and an envelope modulated by the two-photon detuning of the Raman transition. We detect the summed signal at short experimental times, preventing perturbation of the signal from vibration noise. This demonstration of a sub-recoil measurement with a super-recoil sample opens the door to similar scheme with other particles that are difficult to trap and cool well, like electrons. An interferometer instead composed of $\\pi/2$-pulses with a single direction of momentum transfer, can be sensitive to the dynamic polarizability of the atomic ground state. By scanning the frequency of an external driving field, such a measurement can be used to determine the atom's tune-out wavelength. This is the wavelength at which the frequency-dependent polarizability vanishes due to compensating ac-Stark shifts from other atomic states. Lithium's simple atomic structure allows for a precise computation of properties with only {\\em ab initio} wave functions and spectroscopic data. A direct interferometric measurement of lithium's red tune-out wavelength at 670.971626(1) nm, is a precise comparison to existing `all-order' atomic theory computations. It also provides another way to experimentally determine the $S-$ to $P-$ transitions matrix elements, for which large correlations and small values complicate computations. Finally, a future measurement of lithium's ultraviolet tune-out wavelength of at 324.192(2) nm would be sensitive to relativistic approximations in the atomic structure description.Atom interferometry simultaneously verifies existing atomic theory with measurements of atomic properties and searches for exotic physics lurking in plain sight. The techniques developed here broaden the applicability of interferometry and increase measurement sensitivity by simplifying cooling, increasing atom number and reducing the cycle time. Overcoming the current experimental limitations on interrogation time would allow for ultra-precise measurements of both the tune-out wavelength and the fine structure constant.

•Jan 1, 2018•1 citation

Reducing the first-order Doppler shift in a Sagnac interferometer

S. Hannemann, Edcel John Salumbides, Wim Ubachs

We demonstrate a technique to reduce first-order Doppler shifts in crossed atomic/molecular and laser beam setups by aligning two counterpropagating laser beams as part of a Sagnac interferometer. Interference fringes on the exit port of the interferometer reveal minute deviations from perfect antiparallelism. Residual Doppler shifts of this method scale with the ratio v/(4d) of the typical atomic/molecular velocity v and the laser beam diameter d. The method is implemented for precision frequency calibration studies at deep-UV wavelengths, both in one- and two-photon excitation schemes: the 6s(2) --> 6s30p(3/2)J=1 line in Yb at 199 nm and the 4p(6) --> 4p(5)p[1/2](0) transition in Kr at lambda=212 nm. The achieved precision of 6 x 10(-10) is limited by the characteristics of the laser system.

Optics Letters•Apr 25, 2007•32 citations

Multiple Beam Atom Interferometer

Martin Weitz, Tobias Heupel, Theodor W. Hänsch

We report on the demonstration of a multiple beam atom interferometer. While in conventional two-beam atom interferometers a sinusoidal fringe pattern is observed, the fringe pattern measured here resembles the more sharply peaked Airy function known, e.g., from an optical Fabry–Perot resonator. This technique promises to yield an increased precision in atom inter-ferometric measurements of, e.g., rotation or gravitation, since the obtained interference fringes are sharper than those of the corresponding two-beam atom interferometer.

Quantum Electronics and Laser Science Conference•Jan 1, 1997•0 citations

Observation of sodium D-line quantum beat in laser-induced fluorescence using stepwise fs excitation

Gautier Vilmart, Michael S. Scherman, Anais Chiabaut +1 more

levels of atomic sodium using ultrashort laser pulses in a stepwise excitation scheme. Two broadband femtosecond laser pulses are used to excite the 6S level from the 3S ground level in sodium vapor. The first one is simultaneously resonant with the D1 and D2 lines of the 3S→3P transition, and the second one with the 3P→6S transition. The delay between the two pulses is scanned in order to probe the dephasing between the two excited intermediate levels. Quantum beating is observed by monitoring the fluorescence signals at 330 nm and 515 nm, namely transition 4P→3S and 6S→3P, respectively. Signals are compared to a semi-classical model that reproduces the oscillations with a very good agreement.

Optics Letters•Jan 29, 2025•0 citations

Atom microscopy beyond diffraction limit by resonance fluorescence spectroscopy

Juntao Chang, Jörg Evers, Marlan O. Scully +1 more

We proposed an atom microcopy scheme measuring distance between two identical atoms placed in a standing wave laser field by measuring fluorescence spectrum or g2 functionpsilas spectrum. It has fractional-wavelength precision from about lambda/550 to lambda/2 .

Conference on Lasers and Electro-Optics•May 4, 2008•0 citations
The precision of interferometry is directly linked to the fringe spacing of the recorded interferogram. Whereas all interferometric devices show a fringe spacing equal to a wavelength of the laser light we present a novel scheme of a two-beam interferometer exhibiting a fringe spacing reduced by a factor of 2; the direct detection of the beat signal is replaced with the monitoring of the fluorescence of a twofold degenerate atomic system resonant with the laser. The lambda/2 fringe spacing in the fluorescence signal is demonstrated with a hot sodium vapor excited by a broadband laser tuned to the D1 line. In the saturation regime, the dark fringes are expected to be extremely narrow, leading to the possibility of nanoscale displacement measurements or atom localization.
Here we present an interferometer where the fringe spacing is reduced by a factor of two and where the width of a fringe can be extremely narrow, leading to potential applications in very precise displacement measurement. Our interferometer is based on elementary aspects of atomic physics. The laser wavelength is tuned to an atomic transition (i.e. two-fold degenerate two level system). The laser field is initially polarized at 45Aring and sent to a polarizing beam splitter. Vertical and horizontal polarizations experience a relative phase shift and are recombined at the output. We present an experimental demonstration of such an interferometer by exciting a sodium vapour cell on the D1line. The problem posed by the hyperfine structure is solved by exciting the whole Doppler-hyperfine transition by means of a dye frequency-shifted feedback laser delivering a 3 GHz broad and continuous spectrum. Both the lambda/2 periodicity and the anharmonic behaviour have been recorded on the fluorescence signal.
Ushered forth by advances in time and frequency metrology, atom interferometry remains an indispensable measurement tool in atomic physics due to its precision and versatility. A sequence of four pi/2\\pi/2pi/2 beam splitter pulses can create either an interferometer sensitive to the atom's recoil frequency when the momentum imparted by the light reverses direction between pulse pairs or, when constructed from pulses without such reversal, sensitive to the perturbing potential from an external optical field. Here, we demonstrate the first atom interferometer with laser-cooled lithium, advantageous for its low mass and simple atomic structure. We study both a recoil-sensitive Ramsey-Bord\\'e interferometer and interferometry sensitive to the dynamic polarizability of the ground state of lithium. Recoil-sensitive Ramsey-Bord\\'e interferometry benefits from lithium's high recoil frequency, a consequence of its low mass. At an interrogation time of 10 ms, a Ramsey-Bord\\'e lithium interferometer could achieve sensitivities comparable to those realized at much longer times with heavier alkali atoms. However, in contrast with other atoms that are used for atom interferometry, lithium's unresolved excited-state hyperfine structure precludes the the cycling transition necessary for efficient cooling. Without sub-Doppler cooling techniques. As as result, a lithium atomic gas is typically laser cooled to temperatures around 300 mu\\mumuK, above the Doppler limit, and well above the recoil temperature of 6 mu\\mumuK. This higher temperature gas expands rapidly during the operation of an atom interferometer, limiting the experimental interrogation time and preventing spatially resolved detection. In this work, a light-pulse lithium matter-wave interferometer is demonstrated in spite of these limitation. Two-photon Raman interferometer pulses coherently couple the atom's spin and momentum and are thus able to spectrally resolve the outputs. These fast pulses drive conjugate interferometers simultaneously which beat with a fast frequency component proportional to the atomic recoil frequency and an envelope modulated by the two-photon detuning of the Raman transition. We detect the summed signal at short experimental times, preventing perturbation of the signal from vibration noise. This demonstration of a sub-recoil measurement with a super-recoil sample opens the door to similar scheme with other particles that are difficult to trap and cool well, like electrons. An interferometer instead composed of pi/2\\pi/2pi/2-pulses with a single direction of momentum transfer, can be sensitive to the dynamic polarizability of the atomic ground state. By scanning the frequency of an external driving field, such a measurement can be used to determine the atom's tune-out wavelength. This is the wavelength at which the frequency-dependent polarizability vanishes due to compensating ac-Stark shifts from other atomic states. Lithium's simple atomic structure allows for a precise computation of properties with only {\\em ab initio} wave functions and spectroscopic data. A direct interferometric measurement of lithium's red tune-out wavelength at 670.971626(1) nm, is a precise comparison to existing `all-order' atomic theory computations. It also provides another way to experimentally determine the S−S-S− to P−P-P− transitions matrix elements, for which large correlations and small values complicate computations. Finally, a future measurement of lithium's ultraviolet tune-out wavelength of at 324.192(2) nm would be sensitive to relativistic approximations in the atomic structure description.Atom interferometry simultaneously verifies existing atomic theory with measurements of atomic properties and searches for exotic physics lurking in plain sight. The techniques developed here broaden the applicability of interferometry and increase measurement sensitivity by simplifying cooling, increasing atom number and reducing the cycle time. Overcoming the current experimental limitations on interrogation time would allow for ultra-precise measurements of both the tune-out wavelength and the fine structure constant.
We demonstrate a technique to reduce first-order Doppler shifts in crossed atomic/molecular and laser beam setups by aligning two counterpropagating laser beams as part of a Sagnac interferometer. Interference fringes on the exit port of the interferometer reveal minute deviations from perfect antiparallelism. Residual Doppler shifts of this method scale with the ratio v/(4d) of the typical atomic/molecular velocity v and the laser beam diameter d. The method is implemented for precision frequency calibration studies at deep-UV wavelengths, both in one- and two-photon excitation schemes: the 6s(2) --> 6s30p(3/2)J=1 line in Yb at 199 nm and the 4p(6) --> 4p(5)p[1/2](0) transition in Kr at lambda=212 nm. The achieved precision of 6 x 10(-10) is limited by the characteristics of the laser system.
We report on the demonstration of a multiple beam atom interferometer. While in conventional two-beam atom interferometers a sinusoidal fringe pattern is observed, the fringe pattern measured here resembles the more sharply peaked Airy function known, e.g., from an optical Fabry–Perot resonator. This technique promises to yield an increased precision in atom inter-ferometric measurements of, e.g., rotation or gravitation, since the obtained interference fringes are sharper than those of the corresponding two-beam atom interferometer.
levels of atomic sodium using ultrashort laser pulses in a stepwise excitation scheme. Two broadband femtosecond laser pulses are used to excite the 6S level from the 3S ground level in sodium vapor. The first one is simultaneously resonant with the D1 and D2 lines of the 3S→3P transition, and the second one with the 3P→6S transition. The delay between the two pulses is scanned in order to probe the dephasing between the two excited intermediate levels. Quantum beating is observed by monitoring the fluorescence signals at 330 nm and 515 nm, namely transition 4P→3S and 6S→3P, respectively. Signals are compared to a semi-classical model that reproduces the oscillations with a very good agreement.