Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

A high resolution anharmonic λ/2 fringe spacing interferometer

Hugues Guillet de Chatellus, Jean Paul Pique

Published Jun 1, 2009• 0 citations
Publisher

Abstract

Here we present an interferometer where the fringe spacing is reduced by a factor of two and where the width of a fringe can be extremely narrow, leading to potential applications in very precise displacement measurement. Our interferometer is based on elementary aspects of atomic physics. The laser wavelength is tuned to an atomic transition (i.e. two-fold degenerate two level system). The laser field is initially polarized at 45Aring and sent to a polarizing beam splitter. Vertical and horizontal polarizations experience a relative phase shift and are recombined at the output. We present an experimental demonstration of such an interferometer by exciting a sodium vapour cell on the D1line. The problem posed by the hyperfine structure is solved by exciting the whole Doppler-hyperfine transition by means of a dye frequency-shifted feedback laser delivering a 3 GHz broad and continuous spectrum. Both the lambda/2 periodicity and the anharmonic behaviour have been recorded on the fluorescence signal.

DOI
10.1109/cleoe-eqec.2009.5192098

Related papers

λ/2 fringe-spacing interferometer

Hugues Guillet de Chatellus, Jean Paul Pique

The precision of interferometry is directly linked to the fringe spacing of the recorded interferogram. Whereas all interferometric devices show a fringe spacing equal to a wavelength of the laser light we present a novel scheme of a two-beam interferometer exhibiting a fringe spacing reduced by a factor of 2; the direct detection of the beat signal is replaced with the monitoring of the fluorescence of a twofold degenerate atomic system resonant with the laser. The lambda/2 fringe spacing in the fluorescence signal is demonstrated with a hot sodium vapor excited by a broadband laser tuned to the D1 line. In the saturation regime, the dark fringes are expected to be extremely narrow, leading to the possibility of nanoscale displacement measurements or atom localization.

Optics Letters•Mar 6, 2009•8 citations

Hot Beats and Tune Outs: Atom Interferometry with Laser-cooled Lithium

Kayleigh Cassella

Ushered forth by advances in time and frequency metrology, atom interferometry remains an indispensable measurement tool in atomic physics due to its precision and versatility. A sequence of four $\\pi/2$ beam splitter pulses can create either an interferometer sensitive to the atom's recoil frequency when the momentum imparted by the light reverses direction between pulse pairs or, when constructed from pulses without such reversal, sensitive to the perturbing potential from an external optical field. Here, we demonstrate the first atom interferometer with laser-cooled lithium, advantageous for its low mass and simple atomic structure. We study both a recoil-sensitive Ramsey-Bord\\'e interferometer and interferometry sensitive to the dynamic polarizability of the ground state of lithium. Recoil-sensitive Ramsey-Bord\\'e interferometry benefits from lithium's high recoil frequency, a consequence of its low mass. At an interrogation time of 10 ms, a Ramsey-Bord\\'e lithium interferometer could achieve sensitivities comparable to those realized at much longer times with heavier alkali atoms. However, in contrast with other atoms that are used for atom interferometry, lithium's unresolved excited-state hyperfine structure precludes the the cycling transition necessary for efficient cooling. Without sub-Doppler cooling techniques. As as result, a lithium atomic gas is typically laser cooled to temperatures around 300 $\\mu$K, above the Doppler limit, and well above the recoil temperature of 6 $\\mu$K. This higher temperature gas expands rapidly during the operation of an atom interferometer, limiting the experimental interrogation time and preventing spatially resolved detection. In this work, a light-pulse lithium matter-wave interferometer is demonstrated in spite of these limitation. Two-photon Raman interferometer pulses coherently couple the atom's spin and momentum and are thus able to spectrally resolve the outputs. These fast pulses drive conjugate interferometers simultaneously which beat with a fast frequency component proportional to the atomic recoil frequency and an envelope modulated by the two-photon detuning of the Raman transition. We detect the summed signal at short experimental times, preventing perturbation of the signal from vibration noise. This demonstration of a sub-recoil measurement with a super-recoil sample opens the door to similar scheme with other particles that are difficult to trap and cool well, like electrons. An interferometer instead composed of $\\pi/2$-pulses with a single direction of momentum transfer, can be sensitive to the dynamic polarizability of the atomic ground state. By scanning the frequency of an external driving field, such a measurement can be used to determine the atom's tune-out wavelength. This is the wavelength at which the frequency-dependent polarizability vanishes due to compensating ac-Stark shifts from other atomic states. Lithium's simple atomic structure allows for a precise computation of properties with only {\\em ab initio} wave functions and spectroscopic data. A direct interferometric measurement of lithium's red tune-out wavelength at 670.971626(1) nm, is a precise comparison to existing `all-order' atomic theory computations. It also provides another way to experimentally determine the $S-$ to $P-$ transitions matrix elements, for which large correlations and small values complicate computations. Finally, a future measurement of lithium's ultraviolet tune-out wavelength of at 324.192(2) nm would be sensitive to relativistic approximations in the atomic structure description.Atom interferometry simultaneously verifies existing atomic theory with measurements of atomic properties and searches for exotic physics lurking in plain sight. The techniques developed here broaden the applicability of interferometry and increase measurement sensitivity by simplifying cooling, increasing atom number and reducing the cycle time. Overcoming the current experimental limitations on interrogation time would allow for ultra-precise measurements of both the tune-out wavelength and the fine structure constant.

•Jan 1, 2018•1 citation

Multi-wave atom interferometer based on Doppler-insensitive Raman transition

Lele Chen, Ke Zhang, Yaoyao Xu +4 more

An atom interferometer based on Doppler-insensitive Raman transition is proposed, which has sharply peaked interference fringes for multi-wave interference. We show that two sets of counter-propagating Doppler-insensitive Raman beam pairs can be used to construct a new type of multi-wave beam splitter, which can be used to construct an atom interferometer. Although the spacing between adjacent diffraction orders of the interferometer is small, they can be distinguished by the internal state of the atom. Our analysis shows that the width of the fringes of this atom interferometer is inversely proportional to the width (duration) of the beam splitter and the Rabi frequency of the Raman beams, that is, the interferometer can achieve high resolution at high light intensity and long pulse width.

Optics Express•Feb 25, 2020•2 citations

Reducing the first-order Doppler shift in a Sagnac interferometer

S. Hannemann, Edcel John Salumbides, Wim Ubachs

We demonstrate a technique to reduce first-order Doppler shifts in crossed atomic/molecular and laser beam setups by aligning two counterpropagating laser beams as part of a Sagnac interferometer. Interference fringes on the exit port of the interferometer reveal minute deviations from perfect antiparallelism. Residual Doppler shifts of this method scale with the ratio v/(4d) of the typical atomic/molecular velocity v and the laser beam diameter d. The method is implemented for precision frequency calibration studies at deep-UV wavelengths, both in one- and two-photon excitation schemes: the 6s(2) --> 6s30p(3/2)J=1 line in Yb at 199 nm and the 4p(6) --> 4p(5)p[1/2](0) transition in Kr at lambda=212 nm. The achieved precision of 6 x 10(-10) is limited by the characteristics of the laser system.

Optics Letters•Apr 25, 2007•32 citations

Observation of Ramsey Fringes Using a Stimulated, Resonance Raman Transition in a Sodium Atomic Beam

John E. Thomas, Philip Hemmer, Shaoul Ezekiel +3 more

Ramsey fringes have been observed using a stimulated, resonance Raman transition at 1772 MHz excited by two dye lasers in a sodium atomic beam. The width of the central fringe is 650 Hz (half width at half maximum), corresponding to a 30-cm interaction-region separation. The fringes are free from laser jitter because the jitters in both laser beams are correlated. Applications to frequency standards as well as to high-resolution spectroscopy in the microwave to far-ir regions are discussed.

Physical Review Letters•Mar 29, 1982•221 citations

Compact frequency standard at 1556 nm based on the two-photon transition in rubidium at 778 nm

Michel Poulin, Christine Latrasse, Driss Touahri +2 more

This is a progress report on the realization of a compact and transportable frequency standard at 1556 nm based on a two-photon transition in rubidium at 778 nm. These hyperfine transitions present great metrological interest. They have a narrow theoretical linewidth of 150 kHz when observed with a 1556 nm laser, and their absolute frequency is known with an uncertainty of 5.2 X 10-12. In this experiment, we use a high power 1556 nm DFB laser and reduce its linewidth to the 10 kHz level using optical feedback from a confocal cavity. We generate its second harmonic in a periodically poled LiNbO3 crystal and use this signal to injection-lock a Fabry-Perot laser emitting 42 mW at 778 nm. The slave laser is used to observe the Doppler-free two- photon transitions: two counter-propagating beams excite rubidium atoms which emit a blue fluorescence on resonance. This 420 nm light is detected on the side of the Rb cell with a photomultiplier. Such an optical frequency standard at 1556 nm, standing in the multiwavelength telecommunications systems window, becomes an attractive source for absolute frequency calibration of WDM components, optical spectrum analyzers and wavemeters.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 8, 1998•0 citations
Here we present an interferometer where the fringe spacing is reduced by a factor of two and where the width of a fringe can be extremely narrow, leading to potential applications in very precise displacement measurement. Our interferometer is based on elementary aspects of atomic physics. The laser wavelength is tuned to an atomic transition (i.e. two-fold degenerate two level system). The laser field is initially polarized at 45Aring and sent to a polarizing beam splitter. Vertical and horizontal polarizations experience a relative phase shift and are recombined at the output. We present an experimental demonstration of such an interferometer by exciting a sodium vapour cell on the D1line. The problem posed by the hyperfine structure is solved by exciting the whole Doppler-hyperfine transition by means of a dye frequency-shifted feedback laser delivering a 3 GHz broad and continuous spectrum. Both the lambda/2 periodicity and the anharmonic behaviour have been recorded on the fluorescence signal.
The precision of interferometry is directly linked to the fringe spacing of the recorded interferogram. Whereas all interferometric devices show a fringe spacing equal to a wavelength of the laser light we present a novel scheme of a two-beam interferometer exhibiting a fringe spacing reduced by a factor of 2; the direct detection of the beat signal is replaced with the monitoring of the fluorescence of a twofold degenerate atomic system resonant with the laser. The lambda/2 fringe spacing in the fluorescence signal is demonstrated with a hot sodium vapor excited by a broadband laser tuned to the D1 line. In the saturation regime, the dark fringes are expected to be extremely narrow, leading to the possibility of nanoscale displacement measurements or atom localization.
Ushered forth by advances in time and frequency metrology, atom interferometry remains an indispensable measurement tool in atomic physics due to its precision and versatility. A sequence of four pi/2\\pi/2pi/2 beam splitter pulses can create either an interferometer sensitive to the atom's recoil frequency when the momentum imparted by the light reverses direction between pulse pairs or, when constructed from pulses without such reversal, sensitive to the perturbing potential from an external optical field. Here, we demonstrate the first atom interferometer with laser-cooled lithium, advantageous for its low mass and simple atomic structure. We study both a recoil-sensitive Ramsey-Bord\\'e interferometer and interferometry sensitive to the dynamic polarizability of the ground state of lithium. Recoil-sensitive Ramsey-Bord\\'e interferometry benefits from lithium's high recoil frequency, a consequence of its low mass. At an interrogation time of 10 ms, a Ramsey-Bord\\'e lithium interferometer could achieve sensitivities comparable to those realized at much longer times with heavier alkali atoms. However, in contrast with other atoms that are used for atom interferometry, lithium's unresolved excited-state hyperfine structure precludes the the cycling transition necessary for efficient cooling. Without sub-Doppler cooling techniques. As as result, a lithium atomic gas is typically laser cooled to temperatures around 300 mu\\mumuK, above the Doppler limit, and well above the recoil temperature of 6 mu\\mumuK. This higher temperature gas expands rapidly during the operation of an atom interferometer, limiting the experimental interrogation time and preventing spatially resolved detection. In this work, a light-pulse lithium matter-wave interferometer is demonstrated in spite of these limitation. Two-photon Raman interferometer pulses coherently couple the atom's spin and momentum and are thus able to spectrally resolve the outputs. These fast pulses drive conjugate interferometers simultaneously which beat with a fast frequency component proportional to the atomic recoil frequency and an envelope modulated by the two-photon detuning of the Raman transition. We detect the summed signal at short experimental times, preventing perturbation of the signal from vibration noise. This demonstration of a sub-recoil measurement with a super-recoil sample opens the door to similar scheme with other particles that are difficult to trap and cool well, like electrons. An interferometer instead composed of pi/2\\pi/2pi/2-pulses with a single direction of momentum transfer, can be sensitive to the dynamic polarizability of the atomic ground state. By scanning the frequency of an external driving field, such a measurement can be used to determine the atom's tune-out wavelength. This is the wavelength at which the frequency-dependent polarizability vanishes due to compensating ac-Stark shifts from other atomic states. Lithium's simple atomic structure allows for a precise computation of properties with only {\\em ab initio} wave functions and spectroscopic data. A direct interferometric measurement of lithium's red tune-out wavelength at 670.971626(1) nm, is a precise comparison to existing `all-order' atomic theory computations. It also provides another way to experimentally determine the S−S-S− to P−P-P− transitions matrix elements, for which large correlations and small values complicate computations. Finally, a future measurement of lithium's ultraviolet tune-out wavelength of at 324.192(2) nm would be sensitive to relativistic approximations in the atomic structure description.Atom interferometry simultaneously verifies existing atomic theory with measurements of atomic properties and searches for exotic physics lurking in plain sight. The techniques developed here broaden the applicability of interferometry and increase measurement sensitivity by simplifying cooling, increasing atom number and reducing the cycle time. Overcoming the current experimental limitations on interrogation time would allow for ultra-precise measurements of both the tune-out wavelength and the fine structure constant.
An atom interferometer based on Doppler-insensitive Raman transition is proposed, which has sharply peaked interference fringes for multi-wave interference. We show that two sets of counter-propagating Doppler-insensitive Raman beam pairs can be used to construct a new type of multi-wave beam splitter, which can be used to construct an atom interferometer. Although the spacing between adjacent diffraction orders of the interferometer is small, they can be distinguished by the internal state of the atom. Our analysis shows that the width of the fringes of this atom interferometer is inversely proportional to the width (duration) of the beam splitter and the Rabi frequency of the Raman beams, that is, the interferometer can achieve high resolution at high light intensity and long pulse width.
We demonstrate a technique to reduce first-order Doppler shifts in crossed atomic/molecular and laser beam setups by aligning two counterpropagating laser beams as part of a Sagnac interferometer. Interference fringes on the exit port of the interferometer reveal minute deviations from perfect antiparallelism. Residual Doppler shifts of this method scale with the ratio v/(4d) of the typical atomic/molecular velocity v and the laser beam diameter d. The method is implemented for precision frequency calibration studies at deep-UV wavelengths, both in one- and two-photon excitation schemes: the 6s(2) --> 6s30p(3/2)J=1 line in Yb at 199 nm and the 4p(6) --> 4p(5)p[1/2](0) transition in Kr at lambda=212 nm. The achieved precision of 6 x 10(-10) is limited by the characteristics of the laser system.
This is a progress report on the realization of a compact and transportable frequency standard at 1556 nm based on a two-photon transition in rubidium at 778 nm. These hyperfine transitions present great metrological interest. They have a narrow theoretical linewidth of 150 kHz when observed with a 1556 nm laser, and their absolute frequency is known with an uncertainty of 5.2 X 10-12. In this experiment, we use a high power 1556 nm DFB laser and reduce its linewidth to the 10 kHz level using optical feedback from a confocal cavity. We generate its second harmonic in a periodically poled LiNbO3 crystal and use this signal to injection-lock a Fabry-Perot laser emitting 42 mW at 778 nm. The slave laser is used to observe the Doppler-free two- photon transitions: two counter-propagating beams excite rubidium atoms which emit a blue fluorescence on resonance. This 420 nm light is detected on the side of the Rb cell with a photomultiplier. Such an optical frequency standard at 1556 nm, standing in the multiwavelength telecommunications systems window, becomes an attractive source for absolute frequency calibration of WDM components, optical spectrum analyzers and wavemeters.