Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Journal of Modern Physics B

Analysis of NB Josephson Junction Properties under Optical Irradiation

E. Monticone, M. Rajteri, Sabino Maggi, R. Steni, Maria Luisa Rastello, V. Lacquaniti, Giovanni Piero Pepe, L. Parlato, Giuseppe Ammendola

Published Apr 20, 1999• 1 citation
Publisher

Abstract

The gap voltage shift of Nb Josephson junctions fabricated on different substrates is measured under optical illumination at several conditions of light intensity and chopping frequency. The signal dependence on the chopping frequency for junctions realized on glass substrates is bolometer-like with a strong thermal coupling between film and substrate. The responsivity of a junction of 50 μ m × 20 μ m is 50 V/W in vacuum and at liquid helium temperature, and its time constant is lower than 10 μ s . The linearity of the response on the optical power extends over five order of magnitude. The response of junctions fabricated on silicon substrates is flat versus the chopping frequency and about 100 times lower than a junction on glass with the same incident optical power. The shift of the gap at temperatures between 1.2 K and 4.2 K has been measured to separate the nonequilibrium effects from the heating effects.

DOI
10.1142/s0217979299001314

Related papers

Niobium Josephson junction bolometers for optical detection in the visible-infrared region

E. Monticone, V. Lacquaniti, R. Steni +4 more

The response of Nb Josephson junctions fabricated on different substrates, silicon and amorphous glass, is measured under optical illumination at several conditions of light intensity and light chopping frequency. The linearity of the response on the optical power extends over five orders of magnitude. The signal of the junction on silicon is 2 orders of magnitude lower than that of the junction on amorphous glass, but at least one order of magnitude faster, as the time constant of a directly irradiated junction on silicon is lower than 10 /spl mu/s. The signal dependence on chopping frequency of the junction on amorphous glass is typical of a strong thermal coupling between film and substrate, while for the junction on silicon it depends mainly on the thermal boundary resistance between film and substrate.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•4 citations

Enhanced optical detection in a Josephson junction

M. S. Wire, Lee O. Heflinger, Bruce J. Dalrymple +4 more

Shifting of the energy gap of a Nb Josephson junction under direct optical illumination was measured. The response is linear with optical input power over more than five orders of magnitude and is nearly independent of temperature from 4 to 8 K. The rise time of this signal is faster than the 2- mu s rise time of the chopped light signal. These direct signals are 500 to 1500 times larger than those obtained when the same optical power is focused elsewhere on the substrate. This enhanced direct response is interpreted as resulting from thermal isolation of the Josephson junction from the substrate due to thermal boundary resistance.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•2 citations

Josephson tunnel junctions as highly sensitive photodetectors for radiometry

E. Monticone, V. Lacquaniti, M. Rajteri +1 more

Josephson tunnel junctions have recently proved to be fairly sensitive photodetectors over a broad range of wavelengths. This paper shows the results obtained with Nb/Al-AlO x /Nb Josephson junctions at 4.2 K irradiated via an optical fibre and laser light at λ = 633 nm and 690 nm. The responsivity of the devices is about 50 V/W and is linear over several decades. Moreover, stacks of two Josephson junctions are shown to have twice the responsivity of a single junction. A thermal model of the device is considered and the responsivity is calculated as a function of the temperature derivative of the energy gap, the thermal parameters of the junction, and the modulation frequency of the incident beam.

Metrologia•Aug 1, 1998•1 citation

Characterization of Superconducting Josephson Junctions on Electro-Optic LiNbO 3 Substrates at mK Temperatures

Saba Kousar, Roberta Satariano, G. Ausanio +5 more

We report on the fabrication and millikelvin char acterization of Nb/Al–AlOx/Nb Josephson junctions directly de posited on X-cut LiNbO3 substrates. Motivated by the strong electro-optic and piezoelectric properties of LiNbO3, such devices are of interest for future hybrid superconducting–electro-optic architectures. The junctions were fabricated using standard processes involving DC magnetron sputtering followed by controlled thermal oxidation of the aluminum layer to form an AlOx tunnel barrier with reproducible junction areas. Insulation of the junctions was achieved by anodization and SiOx deposition. Electrical measurements performed at 30 mK reveal high-quality Josephson tunnel junction behavior with a critical current density ofJc= 70 A/cm2and a characteristic voltage reaching values up toVm= 286 mV. Differential conductance measurements exhibit pronounced quasiparticle peaks corresponding to a sum gap energy of 2Δ = (2.73 ± 0.05) meV, confirming the good quality of the Nb electrodes. Magnetic-field-dependent measure ments yield a Josephson penetration depth of λJ= 45 μm, confirming operation in the small-junction regime, with deviations from the ideal Josephson interference pattern attributed to non-uniform current distribution across the junction area. Compared to our previous characterization at 4.2 K, this work demonstrates reliable Josephson junction operation on LiNbO3 at dilution-refrigerator temperatures relevant for quantum circuits, supporting the suitability of lithium niobate as a promising substrate for future hybrid superconducting–electro-optic device implementations.

IEEE Transactions on Applied Superconductivity•Feb 23, 2026•0 citations

Dependence of Josephson junctions arrays characteristics on temperature and frequency of microwave radiation

I. Ya. Krasnopolin

This paper presents the results of the measurements of 1-V Nb-AlO/sub x/-Nb, Josephson junctions arrays at temperatures 4.2-1.7 K in frequency band 54-80 GHz. The measurement of the temperature dependence of the critical current, gap voltage and subgap resistance of junctions is a useful tool for the quality control of arrays. By the measurements of the frequency dependence of array response to the microwave radiation it was found, that this response often has a resonance or interference like character, which is dependent on the array geometry. At the temperatures lower than 3-2.5 K as well as at low frequencies 54-60 GHz and T=4.2 K a transition to chaotic state of arrays was observed at small rf-power level.

Conference on Precision Electromagnetic Measurements•Dec 24, 2002•0 citations

Response of Nb-aSi-Nb junctions to 604 GHz radiation

W. C. Danchi, John U. Free, F. Habbal +2 more

We have measured the response of Nb-aSi-Nb junctions to 604 GHz radiation from an optically pumped far-infrared (FIR) laser source. These rugged and thermally cyclable junctions situated at the midpoint of 180 μm long dipole antennas, were fabricated on oxidized silicon wafers using the Selective Niobium Anodization Process (SNAP). Josephson current densities were\sim 9,000A/cm2, the McCumber parameters βcwere ∼3.5, and the Josephson plasma frequencies\omega_{J}\sim2.5\times10^{12}. On a junction with a normal state resistance of\sim7\Omega, we observed three Josephson steps and one photon-assisted tunneling step. The widths of the Josephson steps were studied as a function of the laser power. An RSJ model computer simulation with a nonlinear quasiparticle conductance and an rf current bias (assumed because of the low junction resistance) is able to account reasonably well for the laser-power dependence of the critical current (zeroth step) and the second step. However, the temperature dependence is more complex, and a discrepancy still exists between the RSJ model calculation and the data for the hysteretic first step.

IEEE Transactions on Magnetics•Mar 1, 1985•3 citations
The gap voltage shift of Nb Josephson junctions fabricated on different substrates is measured under optical illumination at several conditions of light intensity and chopping frequency. The signal dependence on the chopping frequency for junctions realized on glass substrates is bolometer-like with a strong thermal coupling between film and substrate. The responsivity of a junction of 50 μ m × 20 μ m is 50 V/W in vacuum and at liquid helium temperature, and its time constant is lower than 10 μ s . The linearity of the response on the optical power extends over five order of magnitude. The response of junctions fabricated on silicon substrates is flat versus the chopping frequency and about 100 times lower than a junction on glass with the same incident optical power. The shift of the gap at temperatures between 1.2 K and 4.2 K has been measured to separate the nonequilibrium effects from the heating effects.
The response of Nb Josephson junctions fabricated on different substrates, silicon and amorphous glass, is measured under optical illumination at several conditions of light intensity and light chopping frequency. The linearity of the response on the optical power extends over five orders of magnitude. The signal of the junction on silicon is 2 orders of magnitude lower than that of the junction on amorphous glass, but at least one order of magnitude faster, as the time constant of a directly irradiated junction on silicon is lower than 10 /spl mu/s. The signal dependence on chopping frequency of the junction on amorphous glass is typical of a strong thermal coupling between film and substrate, while for the junction on silicon it depends mainly on the thermal boundary resistance between film and substrate.
Shifting of the energy gap of a Nb Josephson junction under direct optical illumination was measured. The response is linear with optical input power over more than five orders of magnitude and is nearly independent of temperature from 4 to 8 K. The rise time of this signal is faster than the 2- mu s rise time of the chopped light signal. These direct signals are 500 to 1500 times larger than those obtained when the same optical power is focused elsewhere on the substrate. This enhanced direct response is interpreted as resulting from thermal isolation of the Josephson junction from the substrate due to thermal boundary resistance.>
Josephson tunnel junctions have recently proved to be fairly sensitive photodetectors over a broad range of wavelengths. This paper shows the results obtained with Nb/Al-AlO x /Nb Josephson junctions at 4.2 K irradiated via an optical fibre and laser light at λ = 633 nm and 690 nm. The responsivity of the devices is about 50 V/W and is linear over several decades. Moreover, stacks of two Josephson junctions are shown to have twice the responsivity of a single junction. A thermal model of the device is considered and the responsivity is calculated as a function of the temperature derivative of the energy gap, the thermal parameters of the junction, and the modulation frequency of the incident beam.
We report on the fabrication and millikelvin char acterization of Nb/Al–AlOx/Nb Josephson junctions directly de posited on X-cut LiNbO3 substrates. Motivated by the strong electro-optic and piezoelectric properties of LiNbO3, such devices are of interest for future hybrid superconducting–electro-optic architectures. The junctions were fabricated using standard processes involving DC magnetron sputtering followed by controlled thermal oxidation of the aluminum layer to form an AlOx tunnel barrier with reproducible junction areas. Insulation of the junctions was achieved by anodization and SiOx deposition. Electrical measurements performed at 30 mK reveal high-quality Josephson tunnel junction behavior with a critical current density ofJc= 70 A/cm2and a characteristic voltage reaching values up toVm= 286 mV. Differential conductance measurements exhibit pronounced quasiparticle peaks corresponding to a sum gap energy of 2Δ = (2.73 ± 0.05) meV, confirming the good quality of the Nb electrodes. Magnetic-field-dependent measure ments yield a Josephson penetration depth of λJ= 45 μm, confirming operation in the small-junction regime, with deviations from the ideal Josephson interference pattern attributed to non-uniform current distribution across the junction area. Compared to our previous characterization at 4.2 K, this work demonstrates reliable Josephson junction operation on LiNbO3 at dilution-refrigerator temperatures relevant for quantum circuits, supporting the suitability of lithium niobate as a promising substrate for future hybrid superconducting–electro-optic device implementations.
This paper presents the results of the measurements of 1-V Nb-AlO/sub x/-Nb, Josephson junctions arrays at temperatures 4.2-1.7 K in frequency band 54-80 GHz. The measurement of the temperature dependence of the critical current, gap voltage and subgap resistance of junctions is a useful tool for the quality control of arrays. By the measurements of the frequency dependence of array response to the microwave radiation it was found, that this response often has a resonance or interference like character, which is dependent on the array geometry. At the temperatures lower than 3-2.5 K as well as at low frequencies 54-60 GHz and T=4.2 K a transition to chaotic state of arrays was observed at small rf-power level.
We have measured the response of Nb-aSi-Nb junctions to 604 GHz radiation from an optically pumped far-infrared (FIR) laser source. These rugged and thermally cyclable junctions situated at the midpoint of 180 μm long dipole antennas, were fabricated on oxidized silicon wafers using the Selective Niobium Anodization Process (SNAP). Josephson current densities were\sim 9,000A/cm2, the McCumber parameters βcwere ∼3.5, and the Josephson plasma frequencies\omega_{J}\sim2.5\times10^{12}. On a junction with a normal state resistance of\sim7\Omega, we observed three Josephson steps and one photon-assisted tunneling step. The widths of the Josephson steps were studied as a function of the laser power. An RSJ model computer simulation with a nonlinear quasiparticle conductance and an rf current bias (assumed because of the low junction resistance) is able to account reasonably well for the laser-power dependence of the critical current (zeroth step) and the second step. However, the temperature dependence is more complex, and a discrepancy still exists between the RSJ model calculation and the data for the hysteretic first step.