Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Coplanar strips for Josephson voltage standard circuits

M. Schubert, T. May, G. Wende, Ludwig Fritzsch, H.‐G. Meyer

Published Aug 13, 2001• 22 citations
Publisher

Abstract

We present a microwave circuit for Josephson voltage standards. Here, the Josephson junctions are integrated in a microwave transmission line designed as coplanar strips (CPS). The new layout offers the possibility of achieving a higher scale of integration and to considerably simplify the fabrication technology. The characteristic impedance of the CPS is about 50 Ω, and this should be of interest for programmable Josephson voltage standard circuits with SNS or SINIS junctions. To demonstrate the function of the microwave circuit design, conventional 10 V Josephson voltage standard circuits with 17 000 Nb/AlOx/Nb junctions were prepared and tested. Stable Shapiro steps at the 10 V level were generated. Furthermore, arrays of 1400 SINIS junctions in this microwave layout exhibited first-order Shapiro steps.

DOI
10.1063/1.1394163

Related papers

A new microwave circuit and a new cryoprobe for Josephson voltage standards

M. Schubert, G. Wende, T. May +2 more

We present a new type of microwave circuits for Josephson voltage standards. Coplanar strips (CPS) are used instead of microstriplines or coplanar waveguides (CPW) to integrate the Josephson junctions in a microwave transmission line. Compared to microstripline and CPW circuits the CPS design doubles the scale of integration and simplifies the fabrication technology. Well-operating 10 V circuits in CPS design with 17,000 SIS junctions and 1 V SINIS circuits were tested in a new cryoprobe. In this cryoprobe a low loss dielectric waveguide consisting of a teflon strip is used for the microwave transmission in the 70 GHz frequency range. The dielectric waveguide together with a fibreglass-reinforced plastic supporting tube reduces the contribution of the cryoprobe to the liquid helium boil-off rate drastically. This paper was presented at the 8th International Superconductive Electronics Conference, Osaka, Japan, 19–22 June 2001.

Superconductor Science and Technology•Dec 19, 2001•5 citations

SNS junction on Nb-Ti base for microwave circuits

M. Schubert, Ludwig Fritzsch, G. Wende +1 more

Superconductor-normal metal-superconductor (SNS) junctions are well-suited for large-scale integrated superconducting circuits. Potential applications are programmable voltage standards, digital-to-analog converters and large-scale RSFQ circuits. The application of SNS junctions provides some advantages, e.g. a simplified fabrication technology and reduced parasitic inductances. But it requires a technological process with dimensions down to the submicrometer region to achieve sufficiently high characteristic voltages I/sub C/R/sub N/. In our process the normal metal interlayer is titanium. Therefore the sidewall insulation of the junctions can be made by anodization, as it is known from the Nb-Al technology. Nb-Ti-Nb Josephson junctions and junction arrays were fabricated down to the submicrometer range with I/sub C/R/sub N/ values up to 87 microvolt depending on the titanium thickness. Their measured critical currents have a small spread of about 10 percent. Shapiro steps are observed under the influence of microwave irradiation. For the application of such junctions in a programmable Josephson voltage standard a new type of microwave circuit using coplanar strips is proposed and successfully tested in 10 V SIS circuits.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•12 citations

SINIS Josephson junctions for programmable Josephson voltage standard circuits

H. Schulze, F. Muller, Ralf Behr +3 more

Nonhysteretic Josephson junctions with a superconductor-insulator-normal metal-insulator-superconductor (SINIS) structure fabricated using the reliable Nb-AlO/sub x/ technology have been used for the design and fabrication of a 1-V inherently stable Josephson voltage standard. The superconducting circuit can be driven at the same microwave frequencies as conventional SIS circuits. The microwave-induced 1-V step is suitable for calibration purposes. The successful operation of the 1-V circuit is due to an internal, phase-locked oscillation of all SINIS junctions which are embedded in a low-impedance strip-line. The microwave power required for exciting the coherent oscillation is very low and allows the integration of low power sources. Even operation without any external microwave source appears to be possible.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•51 citations

10 V SINIS Josephson junction series arrays for programmable voltage standards

J. Kohlmann, H. Schulze, Ralf Behr +2 more

A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 2001•20 citations

Design and fabrication of 10 V SINIS Josephson arrays for programmable voltage standards

H. Schulze, Ralf Behr, J. Kohlmann +2 more

The fabrication and the chip layout of 69120 SINIS Josephson junction series arrays for a programmable 10 V Josephson dc voltage standard are presented. Under 70 GHz microwave irradiation, the current-voltage characteristic exhibits a non-hysteretic voltage step with a step width of 200 µA. The chip can be operated with the conventional SIS Josephson voltage standard systems.

Superconductor Science and Technology•Aug 2, 2000•67 citations

Josephson voltage standard microwave circuit driven at 10 GHz

H.‐G. Meyer, Heiner Kohler, G. Wende +5 more

We have investigated a new type of microwave circuit for the generation of frequency-scaled Josephson voltages useful for the representation of highly accurate reference voltages. The circuit consists of a superconducting microstrip resonator and series arrays of Josephson junctions integrated within its rf current antinodes. The circuit is designed to operate at low frequencies of about 10 GHz to simplify the microwave techniques. At a resonator circuit with four Josephson junctions driven at 10.9 GHz we have obtained stable overlapping Shapiro steps up to 4.6 mV at a step width of about 70 µA. A more advanced double-resonator circuit with altogether 216 junctions allows to generate scaled reference voltages up to 0.16 V at steps of about 25 µA in width and at a microwave frequency of 11.1 GHz.

Journal de Physique IV (Proceedings)•Jun 1, 1994•0 citations
We present a microwave circuit for Josephson voltage standards. Here, the Josephson junctions are integrated in a microwave transmission line designed as coplanar strips (CPS). The new layout offers the possibility of achieving a higher scale of integration and to considerably simplify the fabrication technology. The characteristic impedance of the CPS is about 50 Ω, and this should be of interest for programmable Josephson voltage standard circuits with SNS or SINIS junctions. To demonstrate the function of the microwave circuit design, conventional 10 V Josephson voltage standard circuits with 17 000 Nb/AlOx/Nb junctions were prepared and tested. Stable Shapiro steps at the 10 V level were generated. Furthermore, arrays of 1400 SINIS junctions in this microwave layout exhibited first-order Shapiro steps.
We present a new type of microwave circuits for Josephson voltage standards. Coplanar strips (CPS) are used instead of microstriplines or coplanar waveguides (CPW) to integrate the Josephson junctions in a microwave transmission line. Compared to microstripline and CPW circuits the CPS design doubles the scale of integration and simplifies the fabrication technology. Well-operating 10 V circuits in CPS design with 17,000 SIS junctions and 1 V SINIS circuits were tested in a new cryoprobe. In this cryoprobe a low loss dielectric waveguide consisting of a teflon strip is used for the microwave transmission in the 70 GHz frequency range. The dielectric waveguide together with a fibreglass-reinforced plastic supporting tube reduces the contribution of the cryoprobe to the liquid helium boil-off rate drastically. This paper was presented at the 8th International Superconductive Electronics Conference, Osaka, Japan, 19–22 June 2001.
Superconductor-normal metal-superconductor (SNS) junctions are well-suited for large-scale integrated superconducting circuits. Potential applications are programmable voltage standards, digital-to-analog converters and large-scale RSFQ circuits. The application of SNS junctions provides some advantages, e.g. a simplified fabrication technology and reduced parasitic inductances. But it requires a technological process with dimensions down to the submicrometer region to achieve sufficiently high characteristic voltages I/sub C/R/sub N/. In our process the normal metal interlayer is titanium. Therefore the sidewall insulation of the junctions can be made by anodization, as it is known from the Nb-Al technology. Nb-Ti-Nb Josephson junctions and junction arrays were fabricated down to the submicrometer range with I/sub C/R/sub N/ values up to 87 microvolt depending on the titanium thickness. Their measured critical currents have a small spread of about 10 percent. Shapiro steps are observed under the influence of microwave irradiation. For the application of such junctions in a programmable Josephson voltage standard a new type of microwave circuit using coplanar strips is proposed and successfully tested in 10 V SIS circuits.
Nonhysteretic Josephson junctions with a superconductor-insulator-normal metal-insulator-superconductor (SINIS) structure fabricated using the reliable Nb-AlO/sub x/ technology have been used for the design and fabrication of a 1-V inherently stable Josephson voltage standard. The superconducting circuit can be driven at the same microwave frequencies as conventional SIS circuits. The microwave-induced 1-V step is suitable for calibration purposes. The successful operation of the 1-V circuit is due to an internal, phase-locked oscillation of all SINIS junctions which are embedded in a low-impedance strip-line. The microwave power required for exciting the coherent oscillation is very low and allows the integration of low power sources. Even operation without any external microwave source appears to be possible.
A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.
We have investigated a new type of microwave circuit for the generation of frequency-scaled Josephson voltages useful for the representation of highly accurate reference voltages. The circuit consists of a superconducting microstrip resonator and series arrays of Josephson junctions integrated within its rf current antinodes. The circuit is designed to operate at low frequencies of about 10 GHz to simplify the microwave techniques. At a resonator circuit with four Josephson junctions driven at 10.9 GHz we have obtained stable overlapping Shapiro steps up to 4.6 mV at a step width of about 70 µA. A more advanced double-resonator circuit with altogether 216 junctions allows to generate scaled reference voltages up to 0.16 V at steps of about 25 µA in width and at a microwave frequency of 11.1 GHz.