Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)

Optoelectronic characterization of a superconducting quantum detector

Mohsen K. Akhlaghi, A. Hamed Majedi

Published Nov 1, 2008• 2 citations
Publisher

Abstract

Optoelectronic characterization of niobium nitride superconducting nanowire single photon detector is presented in an optical fiber based test setup. The details of the experimental test setup and preliminary characterization results are presented.
DOI
10.1109/leos.2008.4688575

Related papers

Optoelectronic mixing in NbN superconducting nanowire single photon detectors

Zhizhong Yan, A. Hamed Majedi

In this paper, we present our experimental results on the electrically pumped optoelectronic mixing effect exhibited in a niobium nitride (NbN) superconducting nanowire. The experimental setup in order to test the mixer has been reported in detail. This superconductive nanowire optoelectronic mixer demonstrates photodetection and mixing in an integrated manner. We have explored both effects under a great variety of external conditions, such as temperature and bias current, in order to seek potential ways toward quantum optoelectronic detection and mixing by such nanowire device.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jun 10, 2009•1 citation

Optoelectronic characterization of a fiber-coupled NbN superconducting nanowire single photon detector

Zhizhong Yan, Mohsen K. Akhlaghi, Jean-Luc Orgiazzi +1 more

This paper reports our experimental setups to characterize the superconducting nanowire single photon detector (SNSPD) that is packaged in-house. Our packaging method ensures not only a satisfied optical coupling efficiency but also a wide band electrical connection. The packaging approach has been proved to meet the needs of cryogenic operations. The basic optoelectronic characterization results including quantum efficiency and dark count rate indicate a good agreement with the expected values.

Journal of Modern Optics•Nov 11, 2008•14 citations

A complete set of characterizations on the NbN superconducting nanowire single photon detectors

Zhizhong Yan, A. Hamed Majedi

The recent advancement on niobium nitride (NbN) superconducting nanowire single photon detectors (SNSPDs) have drawn considerable attentions by many of their particular figures of merit. In this work, we report our experimental efforts resulting from combinations of dc, RF/microwave and optoelectronic characterizations of this device. The dc IV measurement is under-taken in the full voltage bias range and four distinct regimes are recognized and discussed. The kinetic inductance measurement allows us to gain insights on the electrical properties of the NbN nanowire. An equivalent circuitry model is constructed and simulated for the photoresponse in the course of RF/Microwave S-parameter measurement. The simulated photoresponse qualitatively agrees with the experimental results. Finally we apply continuous wave irradiation to investigate the optical interactions with superconducting nanowires. A relationship between chemical potential and optical power and wavelength has been experimentally confirmed. Two regimes have been identified and physically modeled. The comparison with experimental results displays a good agreement.

IEEE Toronto International Conference Science and Technology for Humanity•Sep 1, 2009•0 citations

Superconducting niobium nanowire single photon detectors

Anthony J. Annunziata, A. Frydman, Matthew O. Reese +3 more

We have fabricated and tested single photon detectors based on a current biased superconducting niobium nanowire patterned into a meander. The detectors are fabricated from high quality, ultra high vacuum sputtered niobium thin films on a sapphire substrate. For detection of single optical photons, we show that the superconductor's intrinsic kinetic inductance does not limit the reset time of the detector, which is ≈ 2 nanoseconds, in contrast to the longer reset times seen in niobium nitride detectors of similar size and geometry. We also describe a readout scheme for photon counting that is unique to Nb due to its lower resistivity. These detectors have applications in imaging of infrared photoemission from CMOS logic circuits as well as in optical communications and quantum information processing.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 18, 2006•14 citations

Characterization of NbTiN-Based Superconducting Nanowire Single-Photon Detectors on Si Waveguide

Kentaro Waki, Taro Yamashita, Shin‐ichiro Inoue +5 more

We have fabricated and characterized a niobium titanium nitride (NbTiN)-based superconducting nanowire single- photon detector (SSPD or SNSPD) on the silicon (Si) waveguide toward the realization of waveguide-coupled SSPD. The superconducting critical temperature and critical current were 7.85 K and 34.4 μA at 0.3 K, respectively. We investigated the optical response of the fabricated device and found that the device exhibited a single-photon response. Furthermore, the fabricated device showed a clear bias current dependence of the output counts similar to conventional SSPDs.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•0 citations

Quantum Optoelectronic Detection and Mixing in the Nanowire Superconducting Structure

Zhizhong Yan

The recent advancement of superconducting nano devices has allowed for making a Superconducting Nanowire Single Photon Detector (SNSPD), whose extraordinary features have strongly motivated the research community to exploit it in many practical applications. In this thesis, an experimental setup for testing the SNSPD has been established. It contains an in-house packaging that meets the requirements of RF/microwave and optoelectronic characterizations. The quantum efficiency and detection efficiency measurements have confirmed that our approach is satisfactory. The dark count performance has reached the anticipated level. The factors affecting rise and fall times of the photoresponses are addressed. \n \nBased on the successful setup, the characterizations including dc, small signal ac measurements have been undertaken. The measurements are aimed at quantitatively investigating Cooper pair density in the superconducting nanowire. The experimental method involves a two-step, small signal S-parameter measurement either in the presence or absence of optical powers. The subsequent measurements by varying the temperature and dc bias current have achieved remarkable understanding on the physical properties of SNSPD nanowires. Then, the electrically induced nonlinearity is studied via the large signal RF and Microwave measurements. The experiments are a set of one-tone and two-tone measurements, in which either the RF driving power is varied at a fixed frequency, or vice versa. Two major nonlinear microwave circuit analysis methods, i.e. time-domain transient and hybrid-domain harmonic balance analysis, are employed. The simulation result reveals the optimized conditions of reaching the desired nonlinearity. \n \nFinally, we have successfully measured the optoelectronic mixing products in an electrically pumped optoelectronic mixer, which has identical structures as that of the SNSPD. The experiments confirm that this mixer is not only sensitive to the classical light intensities, but also to that of the single photon level. Meanwhile, the quantum conversion matrices is derived to interpret the quantum optoelectronic mixing effects.

•Jan 20, 2010•0 citations
In this paper, we present our experimental results on the electrically pumped optoelectronic mixing effect exhibited in a niobium nitride (NbN) superconducting nanowire. The experimental setup in order to test the mixer has been reported in detail. This superconductive nanowire optoelectronic mixer demonstrates photodetection and mixing in an integrated manner. We have explored both effects under a great variety of external conditions, such as temperature and bias current, in order to seek potential ways toward quantum optoelectronic detection and mixing by such nanowire device.
The recent advancement on niobium nitride (NbN) superconducting nanowire single photon detectors (SNSPDs) have drawn considerable attentions by many of their particular figures of merit. In this work, we report our experimental efforts resulting from combinations of dc, RF/microwave and optoelectronic characterizations of this device. The dc IV measurement is under-taken in the full voltage bias range and four distinct regimes are recognized and discussed. The kinetic inductance measurement allows us to gain insights on the electrical properties of the NbN nanowire. An equivalent circuitry model is constructed and simulated for the photoresponse in the course of RF/Microwave S-parameter measurement. The simulated photoresponse qualitatively agrees with the experimental results. Finally we apply continuous wave irradiation to investigate the optical interactions with superconducting nanowires. A relationship between chemical potential and optical power and wavelength has been experimentally confirmed. Two regimes have been identified and physically modeled. The comparison with experimental results displays a good agreement.
We have fabricated and tested single photon detectors based on a current biased superconducting niobium nanowire patterned into a meander. The detectors are fabricated from high quality, ultra high vacuum sputtered niobium thin films on a sapphire substrate. For detection of single optical photons, we show that the superconductor's intrinsic kinetic inductance does not limit the reset time of the detector, which is ≈ 2 nanoseconds, in contrast to the longer reset times seen in niobium nitride detectors of similar size and geometry. We also describe a readout scheme for photon counting that is unique to Nb due to its lower resistivity. These detectors have applications in imaging of infrared photoemission from CMOS logic circuits as well as in optical communications and quantum information processing.
We have fabricated and characterized a niobium titanium nitride (NbTiN)-based superconducting nanowire single- photon detector (SSPD or SNSPD) on the silicon (Si) waveguide toward the realization of waveguide-coupled SSPD. The superconducting critical temperature and critical current were 7.85 K and 34.4 μA at 0.3 K, respectively. We investigated the optical response of the fabricated device and found that the device exhibited a single-photon response. Furthermore, the fabricated device showed a clear bias current dependence of the output counts similar to conventional SSPDs.
The recent advancement of superconducting nano devices has allowed for making a Superconducting Nanowire Single Photon Detector (SNSPD), whose extraordinary features have strongly motivated the research community to exploit it in many practical applications. In this thesis, an experimental setup for testing the SNSPD has been established. It contains an in-house packaging that meets the requirements of RF/microwave and optoelectronic characterizations. The quantum efficiency and detection efficiency measurements have confirmed that our approach is satisfactory. The dark count performance has reached the anticipated level. The factors affecting rise and fall times of the photoresponses are addressed. \n \nBased on the successful setup, the characterizations including dc, small signal ac measurements have been undertaken. The measurements are aimed at quantitatively investigating Cooper pair density in the superconducting nanowire. The experimental method involves a two-step, small signal S-parameter measurement either in the presence or absence of optical powers. The subsequent measurements by varying the temperature and dc bias current have achieved remarkable understanding on the physical properties of SNSPD nanowires. Then, the electrically induced nonlinearity is studied via the large signal RF and Microwave measurements. The experiments are a set of one-tone and two-tone measurements, in which either the RF driving power is varied at a fixed frequency, or vice versa. Two major nonlinear microwave circuit analysis methods, i.e. time-domain transient and hybrid-domain harmonic balance analysis, are employed. The simulation result reveals the optimized conditions of reaching the desired nonlinearity. \n \nFinally, we have successfully measured the optoelectronic mixing products in an electrically pumped optoelectronic mixer, which has identical structures as that of the SNSPD. The experiments confirm that this mixer is not only sensitive to the classical light intensities, but also to that of the single photon level. Meanwhile, the quantum conversion matrices is derived to interpret the quantum optoelectronic mixing effects.