Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Experimental demonstration of ultradense 4D holographic mass storage

Steven A. Lis, Philip D. Henshaw, Michael G. Cheifetz

Published Nov 9, 1993• 6 citations
Publisher

Abstract

This paper presents the results of a two-year Phase II SBIR program investigating a number of the key aspects of the use of Spectral Hole Burning media in a high capacity holographic optical digital computer memory. Factors which were experimentally examined include data longevity and unintentional erasure, and fundamental capacity issues relating to data densities and crosstalk. An experimental memory system was constructed and tested which had all the key elements of a digital memory system. Our experimental results confirm our previous analyses which indicate useful storage densities of 1012 bytes/cm3.

DOI
10.1117/12.163612

Related papers

Holographic optical data storage of 2000 images by photochemical hole burning

Bern Kohler, Stefan Bernet, Alois Renn +1 more

In addition to its importance for the optical spectroscopy of solids, photochemical spectral hole burning (PSHB) has attracted great interest due to its potential use in high density optical data storage [1]. By encoding information as a function of frequency an enormous increase in storage is possible compared to conventional optical storage materials. The most optimistic estimates predict an increase given by the ratio of the inhomogeneous linewidth to the homogeneous linewidth of the optical transition responsible for hole burning. Until now, however, there have been relatively few investigations of the practical limitations to storing a large number of spectral holes [2,3]. We describe here a recent experiment in which 2000 grayscale images were successfully recorded as holograms in the PSHB material chlorin in polyvinylbutyral. In holographic spectral hole burning the relative phase of the interfering light waves used to prepare the hologram has a strong influence on diffraction properties and, hence, on crosstalk between adjacent holograms [4]. By controlling the phase and frequency during burning in a novel manner, we have minimized crosstalk between the stored images.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1991•2 citations

Hole burning, Stark effect, and data storage: 2: holographic recording and detection of spectral holes

Cosimo De, Alois Renn, Urs P. Wild

The properties of holographic recording and detection of spectral holes in the frequency and electric-field dimension are investigated. To optimize the storage properties of optical memory devices, based on spectral hole burning and holography, cross-talk effects between adjacent holograms have to be minimized. These interactions depend on the relative phases of the holograms chosen during the recording stage. Using free-base chlorin (2,3-dihydroporphyrin) in polyvinyl butyral as host at a temperature of 1.7 K, the influence of the relative phase difference between holograms is demonstrated in both the frequency and the electric-field dimension. Experimental results are presented for rows and columns of holograms stored either in the laser frequency or the electric-field dimension and compared to transmission data. Using both dimensions a 10 x 10 matrix of holograms has been stored within the range of a single wave number.

Applied Optics•Jul 10, 1991•28 citations

High-speed optical recording with rare-earth-doped hole-burning materials

Ravinder Kachru, Xiao A. Shen

We are developing a high density, high speed optical memory, using rare-earth doped hole- burning materials. These materials are theoretically capable of achieving storage densities of 1000 Gigabits/cm3 at input/output (I/O) rates of several gigabits/sec. One remarkable attribute of this storage concept is that both the temporal and spatial information encoded on a laser beam can be stored. Because both the temporal and spatial information can be stored, digital data can be recorded serially as a data or packet stream as well as holographically using the page format. During the past year we have achieved a breakthrough in demonstrating random access holographic data storage at high frame rates. Five hundred holograms were stored and retrieved with very good fidelity at 30 Hz (video rate). Each holographic image with 512 multiplied by 488 pixels could be randomly accessed during the storage and retrieval process. This frame rate is the highest demonstrated frame rate for any optical technique. This breakthrough was achieved through the invention of a memory architecture that allows multiple holographic frames to be stored without any mechanical beam scanning. In this new architecture multiplexing of 500 holograms was achieved by stepping the laser frequency over a range covered by high speed acousto-optic modulators (AOM).

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 15, 1996•0 citations

Optical Data Storage Using Persistent Spectral Hole Burning

Eric S. Maniloff, Stefan B. Altner, Stefan Bernet +2 more

The use of holography is attractive for optical data storage due to its poten­tial for implementing page oriented data storage systems. However, multiplexed recording using Bragg selective materials has not provided a large enough stor­age capability to justify the expense of these systems. Persistent spectral hole burning holography allows multiplexed recording using much smaller wavelength separations between the holograms, and hence dramatically increases the storage capacity possible in holographic memory systems [1]. A comparison between the wavelength selectivity obtained for transmission gratings recorded using hole burning in a dye doped polymer film versus Bragg selectivity in a 1 cm thick iron-doped lithium niobate crystal is shown in Fig. (1).

Joint International Symposium on Optical Memory and Optical Data Storage•Jan 1, 1993•0 citations

High-speed, high-density, coherent time-domain optical memory. Final report, 1 September 1990-31 August 1993

Ravinder Kachru, Xiao A. Shen

The objective of this research was to quantitatively evaluate the concept of time-domain optical memory (TDOM) using the hole-burning mechanism. The TDOM concept offers both high speed and high memory density. The advantage of TDOM over traditional semiconductor memory is its inherent parallelism, which allows data to be stored and retrieved from the memory at much higher speed. The practical success of the proposed memory, therefore, depends critically on-among other issues-the storage, retrieval, and processing of images. In addition, new data storage techniques are needed to implement a practical memory. The last three years of this research program have focused on (1) development of new phase modulation techniques to enhance the storage, retrieval, and integrity of the stored information; (2) experimental studies of image storage and phase conjugate retrieval; (3) Image processing; and (4) practical holographic storage of images by using the hybrid time-frequency approach. Specifically, SRI demonstrated data encryption by phase modulating the read and write pulses. Image correlation and convolution was demonstrated and its implication for pattern recognition examined. Finally, this laboratory demonstrated high-fidelity random access and retrieval using holographic storage in Pr3+: YA103 with a single-frequency ring laser. These experiments have clearly demonstrated the practical viability ofmore » TDOM with existing technology. In the next stage of the research, the performance Issues such as bit-error-rates, signal-to-noise ratios, and laser stability need to be addressed. Stimulated photon echoes, Optical memory, Image processing, Pattern recognition, Phase conjugation.« less

•Nov 1, 1993•0 citations

Spatial Resolution of Spectral Hole-Burning-Based Information Storage

Inna Rebane, Jaak Kikas

In the proposed 4D (3 spatial an 1 frequency dimension) optical memories two-or three-step spectral hole burning (SHB) by two or three light beams is used [1]. In 3D (2 spatial and 1 frequency dimension) optical memories a non-erasing readout is realized by two- step (photon-gated (PG)) SHB. Here we consider the effects of PG SHB on the spatial storage density in 3D and 4D optical memories.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1992•0 citations
This paper presents the results of a two-year Phase II SBIR program investigating a number of the key aspects of the use of Spectral Hole Burning media in a high capacity holographic optical digital computer memory. Factors which were experimentally examined include data longevity and unintentional erasure, and fundamental capacity issues relating to data densities and crosstalk. An experimental memory system was constructed and tested which had all the key elements of a digital memory system. Our experimental results confirm our previous analyses which indicate useful storage densities of 1012 bytes/cm3.
In addition to its importance for the optical spectroscopy of solids, photochemical spectral hole burning (PSHB) has attracted great interest due to its potential use in high density optical data storage [1]. By encoding information as a function of frequency an enormous increase in storage is possible compared to conventional optical storage materials. The most optimistic estimates predict an increase given by the ratio of the inhomogeneous linewidth to the homogeneous linewidth of the optical transition responsible for hole burning. Until now, however, there have been relatively few investigations of the practical limitations to storing a large number of spectral holes [2,3]. We describe here a recent experiment in which 2000 grayscale images were successfully recorded as holograms in the PSHB material chlorin in polyvinylbutyral. In holographic spectral hole burning the relative phase of the interfering light waves used to prepare the hologram has a strong influence on diffraction properties and, hence, on crosstalk between adjacent holograms [4]. By controlling the phase and frequency during burning in a novel manner, we have minimized crosstalk between the stored images.
The properties of holographic recording and detection of spectral holes in the frequency and electric-field dimension are investigated. To optimize the storage properties of optical memory devices, based on spectral hole burning and holography, cross-talk effects between adjacent holograms have to be minimized. These interactions depend on the relative phases of the holograms chosen during the recording stage. Using free-base chlorin (2,3-dihydroporphyrin) in polyvinyl butyral as host at a temperature of 1.7 K, the influence of the relative phase difference between holograms is demonstrated in both the frequency and the electric-field dimension. Experimental results are presented for rows and columns of holograms stored either in the laser frequency or the electric-field dimension and compared to transmission data. Using both dimensions a 10 x 10 matrix of holograms has been stored within the range of a single wave number.
We are developing a high density, high speed optical memory, using rare-earth doped hole- burning materials. These materials are theoretically capable of achieving storage densities of 1000 Gigabits/cm3 at input/output (I/O) rates of several gigabits/sec. One remarkable attribute of this storage concept is that both the temporal and spatial information encoded on a laser beam can be stored. Because both the temporal and spatial information can be stored, digital data can be recorded serially as a data or packet stream as well as holographically using the page format. During the past year we have achieved a breakthrough in demonstrating random access holographic data storage at high frame rates. Five hundred holograms were stored and retrieved with very good fidelity at 30 Hz (video rate). Each holographic image with 512 multiplied by 488 pixels could be randomly accessed during the storage and retrieval process. This frame rate is the highest demonstrated frame rate for any optical technique. This breakthrough was achieved through the invention of a memory architecture that allows multiple holographic frames to be stored without any mechanical beam scanning. In this new architecture multiplexing of 500 holograms was achieved by stepping the laser frequency over a range covered by high speed acousto-optic modulators (AOM).
The use of holography is attractive for optical data storage due to its poten­tial for implementing page oriented data storage systems. However, multiplexed recording using Bragg selective materials has not provided a large enough stor­age capability to justify the expense of these systems. Persistent spectral hole burning holography allows multiplexed recording using much smaller wavelength separations between the holograms, and hence dramatically increases the storage capacity possible in holographic memory systems [1]. A comparison between the wavelength selectivity obtained for transmission gratings recorded using hole burning in a dye doped polymer film versus Bragg selectivity in a 1 cm thick iron-doped lithium niobate crystal is shown in Fig. (1).
The objective of this research was to quantitatively evaluate the concept of time-domain optical memory (TDOM) using the hole-burning mechanism. The TDOM concept offers both high speed and high memory density. The advantage of TDOM over traditional semiconductor memory is its inherent parallelism, which allows data to be stored and retrieved from the memory at much higher speed. The practical success of the proposed memory, therefore, depends critically on-among other issues-the storage, retrieval, and processing of images. In addition, new data storage techniques are needed to implement a practical memory. The last three years of this research program have focused on (1) development of new phase modulation techniques to enhance the storage, retrieval, and integrity of the stored information; (2) experimental studies of image storage and phase conjugate retrieval; (3) Image processing; and (4) practical holographic storage of images by using the hybrid time-frequency approach. Specifically, SRI demonstrated data encryption by phase modulating the read and write pulses. Image correlation and convolution was demonstrated and its implication for pattern recognition examined. Finally, this laboratory demonstrated high-fidelity random access and retrieval using holographic storage in Pr3+: YA103 with a single-frequency ring laser. These experiments have clearly demonstrated the practical viability ofmore » TDOM with existing technology. In the next stage of the research, the performance Issues such as bit-error-rates, signal-to-noise ratios, and laser stability need to be addressed. Stimulated photon echoes, Optical memory, Image processing, Pattern recognition, Phase conjugation.« less