Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IET Communications

Robust amplify‐and‐forward relay beamforming for security with mean square error constraint

Xiangwu Gong, Hong Long, Hao Yin, Feihong Dong, Baoquan Ren

Published Mar 27, 2015• 15 citations
Publisher

Abstract

In this study, security schemes at the physical layer are proposed for an amplify‐and‐forward relay system in the presence of a passive eavesdropper. We focus on maximising the transmit power of the artificial noise (AN) to degrade the minimum mean square error (MMSE) level at the eavesdropper, while achieving MMSE constraint for the desired receiver. Assuming that the desired receiver and the passive eavesdropper possess perfect channel state information (CSI), AN is designed to lie in the null space of legitimate channels. However, the available CSI is impossible to be perfect in practice. Therefore the authors present a robust beamforming scheme which maximises the worst‐case transmit power of the AN under the condition of imperfect CSI and recovers a large fraction of the performance in the perfect CSI case. A classical alternating optimisation algorithm is proposed to obtain the relay beamforming weights, and simulation results show the benefit of proposed schemes.

DOI
10.1049/iet-com.2014.1112

Related papers

Robust Cooperative Relay Beamforming Design for Security

Xiangwu Gong, Feihong Dong, Hongjun Li +1 more

In this paper, we investigate a security transmission scheme at the physical layer for cooperative wireless relay networks in the presence of a passive eavesdropper.While the security scheme has been previously investigated with perfect channel state information(CSI) in the presence of a passive eavesdropper, this paper focuses on researching the robust cooperative relay beamforming mechanism for wireless relay networks which makes use of artificial noise (AN) to confuse the eavesdropper and increase its uncertainty about the source message.The transmit power used for AN is maximized to degrade the signal-to-interference-plus-noise-ratio (SINR) level at the eavesdropper, while satisfying the individual power constraint of each relay node and worst-case SINR constraint at the desired receiver under a bounded spherical region for the norm of the CSI error vector from the relays to the destination.Cooperative beamforming weight vector in the security scheme can be obtained by using S-Procedure and rank relaxation techniques.The benefit of the proposed scheme is showed in simulation results.

KSII Transactions on Internet and Information Systems•Nov 30, 2015•0 citations

Robust Secure Beamforming for Multiantenna Relay Networks with Multiple Eavesdroppers

Yuchong Li, Lijian Zhang, Wei Li Dong

Physical layer security has recently emerged as a promising approach to achieve security and communication integration. The built‐in security mechanism based on the characteristics of the wireless channel provides a feasible idea for the realization of “one secret at a time.” It has significant potential applications in high‐rate data transmission encryption, authentication, integrity protection of service data, and Internet of Things lightweight encryption. This paper investigates the robust secure transmit design problem for amplify‐and‐forward multiantenna relay networks in the presence of multiple single‐antenna eavesdroppers. A robust artificial noise (AN) aided secure beamforming design is proposed by taking into account the imperfect channel state information (CSI) of the eavesdroppers. The goal is to jointly design the beamforming matrix and the AN covariance matrix at the relay based on the imperfect CSI of eavesdroppers, such that the worst‐case secrecy rate is maximized subject to the total power and the per‐antenna power constraints. Aiming at the nonconvex optimization problem, a two‐level optimization algorithm based on semidefinite relaxation (SDR) and S‐procedure is proposed. It is proven that there is a rank‐one optimal solution for the SDR problem. Simulation results show that the proposed scheme is robust and superior to existing schemes.

Mathematical Problems in Engineering•Jan 1, 2023•2 citations

Joint cooperative beamforming and artificial noise design for secure AF relay networks with energy-harvesting eavesdroppers

Hehao Niu, Bangning Zhang, Daoxing Guo +2 more

In this paper, we investigate physical layer security for simultaneous wireless information and power transfer in amplify-and-forward relay networks. We propose a joint robust cooperative beamforming and artificial noise scheme for secure communication and efficient wireless energy transfer. Specifically, by treating the energy receiver as a potential eavesdropper and assuming that only imperfect channel state information can be obtained, we formulate an optimization problem to maximize the worst-case secrecy rate between the source and the legitimate information receiver under both the power constraint at the relays and the wireless power harvest constraint at the energy receiver. Since such a problem is non-convex and hard to tackle, we propose a two-level optimization approach which involves a one-dimensional search and semidefinite relaxation. Simulation results show that the proposed robust scheme achieves better worst-case secrecy rate performance than other schemes.

Frontiers of Information Technology & Electronic Engineering•Jun 1, 2017•3 citations

Non‐linear transceiver design for secure communications with artificial noise‐assisted MIMO relay

Lei Zhang, Yunlong Cai, Benoı̂t Champagne +1 more

This study investigates the problem of physical layer security for amplify‐and‐forward (AF) multiple‐input multiple‐output (MIMO) relay systems operating in the presence of a passive eavesdropper. Specifically, the authors consider the robust design of an artificial noise (AN)‐assisted non‐linear transceiver employing Tomlinson–Harashima precoding (THP), with imperfect knowledge of the legitimate channel states. The design problem can be reformulated as a two‐level optimisation, where the outer problem aims to optimise the source precoder as a function of the relay precoder, while the inner problem at the relay aims to jointly optimise the relay precoder as well as the power allocation between the AN and the information‐bearing signals. To solve the inner problem, the authors adopt a bisection method which attempts to maximise the AN power level, to confuse the eavesdropper, while satisfying the mean‐squared‐error requirement for the intended user. Some relaxation for the objective function is applied to transform the problem into a standard convex optimisation one. Regarding the outer problem, closed‐form solutions for the precoders can be derived by an iterative method based on the Karush–Kuhn–Tucker conditions. Simulation results illustrate the superior secrecy performance provided by the proposed non‐linear transceiver design with AN and THP.

IET Communications•Jan 12, 2017•4 citations

Robust secure transmission for wireless relay networks with direct links and bounded channel uncertainties

Nanmiao Wu, Shaodan Ma

This paper investigates the problem of joint design of cooperative beamforming and artificial noise to achieve robust secure transmission in an amplify and forward (AF) relay network in the presence of multiple eavesdroppers. Specifically, the joint design is targeting to minimize the total relay transmission power while guaranteeing the quality of service at the legitimate receiver and preventing the eavesdroppers from interception. Different from prior designs, direct links between the source and the legitimate receiver/eavesdroppers are considered and no perfect channel state information is assumed. Considering bounded channel uncertainties in all links, the worst cases of the total relay transmission power, quality of service (i.e., the received signal-to-noise ratio) and security are first identified. Then an iterative algorithm is proposed to jointly design the relay beamforming and artificial noises for robust secure transmission. It is demonstrated by computer simulations that the proposed robust secure design is effective and practical when compared with the prior designs.

IEEE/CIC International Conference on Communications in China (ICCC)•Jul 1, 2016•0 citations

Robust secure switching transmission in multi‐antenna relaying systems: cooperative jamming or decode‐and‐forward beamforming

Zhi Lin, Yueming Cai, Weiwei Yang +1 more

In this study, the authors investigate the physical layer security for safeguarding secure transmission in multi‐antenna relaying networks with imperfect channel state information (CSI). Different from traditional strategies in multi‐antenna relaying systems, which would terminate the communication if the relay could not decode the signals successfully, the authors propose robust secure transmission strategy which switches between cooperative jamming (CJ) and decode‐and‐forward (DF) beamforming. Specifically, if the received signal‐to‐noise ratio at the relay is lower than a predefined threshold, it will impose CJ signals on potential eavesdropper, otherwise the relay would operate DF beamforming. The authors’ objective is to maximise secrecy rate and minimise secrecy outage probability in different practical communication scenarios with relaxed or strict time‐delay constraint. Thus, given the unavailability of the perfect eavesdropping CSI, the authors propose a worst‐case robust design and a statistical‐approach robust design based on secrecy rate and secrecy outage criterion, respectively. In addition, a traditional DF robust scheme and a non‐robust scheme are also considered as benchmarks. Simulation results verify that the proposed scheme significantly outperforms the traditional DF robust scheme and the non‐robust scheme.

IET Communications•May 27, 2016•7 citations
In this study, security schemes at the physical layer are proposed for an amplify‐and‐forward relay system in the presence of a passive eavesdropper. We focus on maximising the transmit power of the artificial noise (AN) to degrade the minimum mean square error (MMSE) level at the eavesdropper, while achieving MMSE constraint for the desired receiver. Assuming that the desired receiver and the passive eavesdropper possess perfect channel state information (CSI), AN is designed to lie in the null space of legitimate channels. However, the available CSI is impossible to be perfect in practice. Therefore the authors present a robust beamforming scheme which maximises the worst‐case transmit power of the AN under the condition of imperfect CSI and recovers a large fraction of the performance in the perfect CSI case. A classical alternating optimisation algorithm is proposed to obtain the relay beamforming weights, and simulation results show the benefit of proposed schemes.
In this paper, we investigate a security transmission scheme at the physical layer for cooperative wireless relay networks in the presence of a passive eavesdropper.While the security scheme has been previously investigated with perfect channel state information(CSI) in the presence of a passive eavesdropper, this paper focuses on researching the robust cooperative relay beamforming mechanism for wireless relay networks which makes use of artificial noise (AN) to confuse the eavesdropper and increase its uncertainty about the source message.The transmit power used for AN is maximized to degrade the signal-to-interference-plus-noise-ratio (SINR) level at the eavesdropper, while satisfying the individual power constraint of each relay node and worst-case SINR constraint at the desired receiver under a bounded spherical region for the norm of the CSI error vector from the relays to the destination.Cooperative beamforming weight vector in the security scheme can be obtained by using S-Procedure and rank relaxation techniques.The benefit of the proposed scheme is showed in simulation results.
Physical layer security has recently emerged as a promising approach to achieve security and communication integration. The built‐in security mechanism based on the characteristics of the wireless channel provides a feasible idea for the realization of “one secret at a time.” It has significant potential applications in high‐rate data transmission encryption, authentication, integrity protection of service data, and Internet of Things lightweight encryption. This paper investigates the robust secure transmit design problem for amplify‐and‐forward multiantenna relay networks in the presence of multiple single‐antenna eavesdroppers. A robust artificial noise (AN) aided secure beamforming design is proposed by taking into account the imperfect channel state information (CSI) of the eavesdroppers. The goal is to jointly design the beamforming matrix and the AN covariance matrix at the relay based on the imperfect CSI of eavesdroppers, such that the worst‐case secrecy rate is maximized subject to the total power and the per‐antenna power constraints. Aiming at the nonconvex optimization problem, a two‐level optimization algorithm based on semidefinite relaxation (SDR) and S‐procedure is proposed. It is proven that there is a rank‐one optimal solution for the SDR problem. Simulation results show that the proposed scheme is robust and superior to existing schemes.
In this paper, we investigate physical layer security for simultaneous wireless information and power transfer in amplify-and-forward relay networks. We propose a joint robust cooperative beamforming and artificial noise scheme for secure communication and efficient wireless energy transfer. Specifically, by treating the energy receiver as a potential eavesdropper and assuming that only imperfect channel state information can be obtained, we formulate an optimization problem to maximize the worst-case secrecy rate between the source and the legitimate information receiver under both the power constraint at the relays and the wireless power harvest constraint at the energy receiver. Since such a problem is non-convex and hard to tackle, we propose a two-level optimization approach which involves a one-dimensional search and semidefinite relaxation. Simulation results show that the proposed robust scheme achieves better worst-case secrecy rate performance than other schemes.
This study investigates the problem of physical layer security for amplify‐and‐forward (AF) multiple‐input multiple‐output (MIMO) relay systems operating in the presence of a passive eavesdropper. Specifically, the authors consider the robust design of an artificial noise (AN)‐assisted non‐linear transceiver employing Tomlinson–Harashima precoding (THP), with imperfect knowledge of the legitimate channel states. The design problem can be reformulated as a two‐level optimisation, where the outer problem aims to optimise the source precoder as a function of the relay precoder, while the inner problem at the relay aims to jointly optimise the relay precoder as well as the power allocation between the AN and the information‐bearing signals. To solve the inner problem, the authors adopt a bisection method which attempts to maximise the AN power level, to confuse the eavesdropper, while satisfying the mean‐squared‐error requirement for the intended user. Some relaxation for the objective function is applied to transform the problem into a standard convex optimisation one. Regarding the outer problem, closed‐form solutions for the precoders can be derived by an iterative method based on the Karush–Kuhn–Tucker conditions. Simulation results illustrate the superior secrecy performance provided by the proposed non‐linear transceiver design with AN and THP.
This paper investigates the problem of joint design of cooperative beamforming and artificial noise to achieve robust secure transmission in an amplify and forward (AF) relay network in the presence of multiple eavesdroppers. Specifically, the joint design is targeting to minimize the total relay transmission power while guaranteeing the quality of service at the legitimate receiver and preventing the eavesdroppers from interception. Different from prior designs, direct links between the source and the legitimate receiver/eavesdroppers are considered and no perfect channel state information is assumed. Considering bounded channel uncertainties in all links, the worst cases of the total relay transmission power, quality of service (i.e., the received signal-to-noise ratio) and security are first identified. Then an iterative algorithm is proposed to jointly design the relay beamforming and artificial noises for robust secure transmission. It is demonstrated by computer simulations that the proposed robust secure design is effective and practical when compared with the prior designs.
In this study, the authors investigate the physical layer security for safeguarding secure transmission in multi‐antenna relaying networks with imperfect channel state information (CSI). Different from traditional strategies in multi‐antenna relaying systems, which would terminate the communication if the relay could not decode the signals successfully, the authors propose robust secure transmission strategy which switches between cooperative jamming (CJ) and decode‐and‐forward (DF) beamforming. Specifically, if the received signal‐to‐noise ratio at the relay is lower than a predefined threshold, it will impose CJ signals on potential eavesdropper, otherwise the relay would operate DF beamforming. The authors’ objective is to maximise secrecy rate and minimise secrecy outage probability in different practical communication scenarios with relaxed or strict time‐delay constraint. Thus, given the unavailability of the perfect eavesdropping CSI, the authors propose a worst‐case robust design and a statistical‐approach robust design based on secrecy rate and secrecy outage criterion, respectively. In addition, a traditional DF robust scheme and a non‐robust scheme are also considered as benchmarks. Simulation results verify that the proposed scheme significantly outperforms the traditional DF robust scheme and the non‐robust scheme.