Bistable switching using an optical Tamm cavity with a Kerr medium

Lloyd W. Hillman, Carlos R. Stroud

Wei Li Zhang, Yao Jiang, Ye Yu Zhu +2 more

A method for realizing low-threshold all-optical bistable logic control is proposed based on Tamm plasmons (TPs), which are formed in an asymmetric dielectric Bragg reflector (DBR)-metal-DBR (ADMD) structure with a layer of Kerr medium embedded. The ADMD structure supports two TPs due to coupling of trapped modes at each metal-DBR interface, generating two dips in the structure's reflection spectrum. Thus, control (i.e., pump) and controlled (i.e., probe) light with wavelengths close to the two dips, respectively, can be imported. It is verified theoretically that, thanks to the enhanced Kerr nonlinearity related to excitation of high-quality TP, bistable switching at very low injection intensity can be initiated by strength or direction variation of the pump. Meanwhile, the probe changes correspondingly with the pump. Thus, all-optical bistable logic operation of the probe can be controlled by the pump.

Hamidreza Foroughi, Nader Daneshfar

In this study, we theoretically investigate the optical bistability (OB) in hybrid triple-cavity optomechanical systems (OMSs) composed of three coupled cavities (two optical cavities and one optomechanical cavity) in the presence of semiconductor quantum dot molecules and a Kerr medium with a Kerr coefficient of χ when the optomechanical cavity is driven by a pump laser with frequency ωp and the amplitude Ep, which results in optical pressure on the movable mirror of the OMS. The dynamical equations of motion for this triple-cavity hybrid system in the steady state limit are solved using the Heisenberg-Langevin equations to achieve OB. We have demonstrated that it is possible to adjust both the width of the hysteresis loop and the switching threshold by controlling the Kerr coefficient . t is found that by properly tuning the physical parameters, the bistable thresholds of the system can be switched on and switched off, which is useful for designing and optimizing sensitive all-optical switching .

G. Zartov, Kr.P. Panajotov, Rumiana A. Peyeva

Aranya B. Bhattacherjee, Muhammad Sami Hasan

We theoretically analyse the optical and optomechanical nonlinearity present in a hybrid system consisting of a quantum dot(QD) coupled to an optomechanical cavity in the presence of a nonlinear Kerr medium, and show that this hybrid system can be used as an all optical switch. A high degree of control and tunability via the QD-cavity coupling strength, the Kerr and the optomechanical nonlinearity over the bistable behaviour shown by the mean intracavity optical field and the power transmission of the weak probe field can be achieved.The results obtained in this investigation has the potential to be used for designing efficient all-optical switch and high sensitive sensors for use in Telecom systems.

Weiqiang Ding, Lixue Chen, Shutian Liu