Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Photonics in Switching

Integrated optical interface for single-flux-quantum buffer memory

Satoshi Shinada, Hirotaka Terai, Naoya Wada, Z. Wang, T. Miyazaki

Published Aug 1, 2008• 0 citations
Publisher

Abstract

We have developed an optical input module to single-flux-quantum (SFQ) circuit to realize high-speed integrated buffer memory in optical packet switch. We succeeded in demonstrating SFQ pulse generation by optical input of 100-ps pulse width.
DOI
10.1109/ps.2008.4804161

Related papers

Integrated Optical Input Interface for Single-Flux-Quantum Circuit Buffer Memory

Satoshi Shinada, Hirotaka Terai, Zhen Wang +1 more

We have developed an optical input module for single-flux-quantum (SFQ) circuit to achieve high-speed buffer memory in the optical packet switch. We succeeded in demonstrating SFQ pulse generation by optical pulse input with 100-ps width.

Conference on Lasers and Electro-Optics•Jan 1, 2010•0 citations

Demonstration of 1550-nm band optical input to single-flux-quantum circuit

Satoshi Shinada, Hirotaka Terai, Zhixin Wang +1 more

We developed a built-in optical input module for a superconducting single-flux-quantum (SFQ) circuit. An SFQ pulse generation could be achieved by 1550 nm band optical pulse input, whose power was less than 1 mW.

OECC 2010 Technical Digest•Jan 1, 2010•0 citations

1550 nm band optical input module with superconducting single-flux-quantum circuit

Satoshi Shinada, Hirotaka Terai, Zhen Wang +1 more

We developed an optical input module with a superconducting single-flux-quantum (SFQ) circuit for application of ultrafast photonic networks in the near future. The optical input module, consisting of a built-in photodiode (PD) with a coplanar waveguide transmission line, was fabricated on an InP substrate and flip-chip bonded with the SFQ circuit on a Si substrate. The fabricated PD showed photosensitivities of more than 0.2 A/W for the wavelength range 1480 to 1530 nm at 4.2 K. SFQ pulses were generated by less than 1 mW optical pulse input.

Applied Physics Letters•May 3, 2010•9 citations

Progress of Single Flux Quantum Packet Switch Technology

Shinichi Yorozu, Y. Kameda, Y. Hashimoto +3 more

With regard to sustaining future capacity of network traffic, the current hardware technology has a big bottleneck in terms of power consumption and insufficient operation speed. To overcome this bottleneck, we have developed a single flux quantum (SFQ) packet-switching circuit. We report recent progress in developing the SFQ packet-switching application. First, we demonstrate a 40 GHz, 160 Gb/s, 4 /spl times/ 4 packet switching circuit, which is currently the fastest clock frequency reported packet switch. Then, we describe a currently possible switching module using SFQ technology. Finally, we consider how SFQ technology can be used to scale the packet-switching capacity up to 100 Tbps.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•13 citations

High-speed demonstration of an output interface driver for single-flux quantum systems

N. Harada, Akira Yoshida, Naoki Yokoyama

The high-speed operation of a one-channel output interface for a single-flux quantum (SFQ) system has been demonstrated. The interface consisted of a Josephson latching driver, a room-temperature semiconductor amplifier, and a decision circuit module. The Josephson latching driver was fabricated by using a 2.5-kA/cm/sup 2/ standard Nb junction process and used to amplify an SFQ pulse into a 5.5-mV level signal at 10 Gb/s. The interface converted the SFQ pulse signal into a nonreturn-to-zero signal having an amplitude of 1 V at 10 Gb/s.

IEEE Transactions on Applied Superconductivity•Sep 1, 2002•9 citations

Integration of Optical Waveguides With Single Flux Quantum Circuits

Yoshiki Arita, Nobuyuki Yoshikawa, Baba Toshihiko

Single flux quantum (SFQ) circuits and optical circuits are expected to be used in next-generation integrated circuits. This study investigates basic technologies for integrating optical circuits with SFQ circuits to exploit the advantages of both technologies. We calculated, designed and evaluated metal-clad waveguides, which can be fabricated by the ISTEC standard process (STD2). Light propagates along an 830-μm-long waveguide with a propagation loss of 16 dB/mm. We also designed and evaluated an optical-electrical (O-E) converter that uses a Josephson junction, which can be fabricated by the same process used to fabricate the SFQ circuits. When an optical signal with a peak power of 1.15 mW at 1.548 μm is input, the Josephson O-E converter generates SFQ pulses.

IEEE Transactions on Applied Superconductivity•Jan 7, 2011•1 citation
We developed an optical input module with a superconducting single-flux-quantum (SFQ) circuit for application of ultrafast photonic networks in the near future. The optical input module, consisting of a built-in photodiode (PD) with a coplanar waveguide transmission line, was fabricated on an InP substrate and flip-chip bonded with the SFQ circuit on a Si substrate. The fabricated PD showed photosensitivities of more than 0.2 A/W for the wavelength range 1480 to 1530 nm at 4.2 K. SFQ pulses were generated by less than 1 mW optical pulse input.
With regard to sustaining future capacity of network traffic, the current hardware technology has a big bottleneck in terms of power consumption and insufficient operation speed. To overcome this bottleneck, we have developed a single flux quantum (SFQ) packet-switching circuit. We report recent progress in developing the SFQ packet-switching application. First, we demonstrate a 40 GHz, 160 Gb/s, 4 /spl times/ 4 packet switching circuit, which is currently the fastest clock frequency reported packet switch. Then, we describe a currently possible switching module using SFQ technology. Finally, we consider how SFQ technology can be used to scale the packet-switching capacity up to 100 Tbps.
The high-speed operation of a one-channel output interface for a single-flux quantum (SFQ) system has been demonstrated. The interface consisted of a Josephson latching driver, a room-temperature semiconductor amplifier, and a decision circuit module. The Josephson latching driver was fabricated by using a 2.5-kA/cm/sup 2/ standard Nb junction process and used to amplify an SFQ pulse into a 5.5-mV level signal at 10 Gb/s. The interface converted the SFQ pulse signal into a nonreturn-to-zero signal having an amplitude of 1 V at 10 Gb/s.
Single flux quantum (SFQ) circuits and optical circuits are expected to be used in next-generation integrated circuits. This study investigates basic technologies for integrating optical circuits with SFQ circuits to exploit the advantages of both technologies. We calculated, designed and evaluated metal-clad waveguides, which can be fabricated by the ISTEC standard process (STD2). Light propagates along an 830-μm-long waveguide with a propagation loss of 16 dB/mm. We also designed and evaluated an optical-electrical (O-E) converter that uses a Josephson junction, which can be fabricated by the same process used to fabricate the SFQ circuits. When an optical signal with a peak power of 1.15 mW at 1.548 μm is input, the Josephson O-E converter generates SFQ pulses.