Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Quantum information investigation using photons trapped in a fiber optic ring resonator

Poramet Chunpang, Chatchawal Sripakdee, Preecha P. Yupapin

Published Jan 11, 2005• 0 citations
Publisher

Abstract

Photons source generated by light pulses tapping in a fiber optic rinvg resonator is presented. Light pulses from OTDR were launched into a single mode fiber optic, which was a form of a ring resonator. All fiber optic components were connected and used to realize the practical in quantum information via fiber optic. Light pulses were trapped in the ring resonator in a period of time, i.e. memor time, before the S/N ratio of the detected signal was not valid. Results obtained have shown that number of pulse/phton trains obtained depend on a fiber optic ring resonator length, input pulse width and gain. In applications, the signal amplifier using inline connection with fiber laser could be used to amaintain the required S/N. The attenuation part could be employed into the system to produce a single photon pulse during the circulation in fiber optic ring resonator. The photon visibility in term of polarization extinction ratio of 10 dB is noted.

DOI
10.1117/12.568993

Related papers

Time-Bin Entangled Photons using an all Fiber Optic MZI Incorporating a Fiber Ring Resonator

Preecha P. Yupapin, S. Suchat, P. Phiphithirankarn

A new technique of an entangled photon pair generation using an all fiber optic scheme is presented. The proposed system is consisted of a fiber optic Mach-Zehnder interferometer (MZI) incorporating with a fiber optic ring resonator. The Kerr nonlinearity effect in the fiber ring resonator is exploited for the generation of two independent squeezed beams. The advantage of such a system is that it requires a simple arrangement without any optical pumping part and bulky optical components. Polarized light pulse trains are launched randomly into a MZI which one part of them is delayed in the longer path. The output pulses from both arms of the MZI are entered into a nonlinear fiber optic ring resonator. Where the superpositions of light pulses in a nonlinear fiber optics ring resonator are randomly occurred which is formed the entangled photon pairs. A polarization controller controls polarization states of light pulses while circulating in the ring resonator. The entangled photons are seen on the avalanche photo-detector, which is shown in good agreement with the previous works.

RIVF International Conference on Computing and Communication Technologies (RIVF)•Mar 1, 2007•0 citations

Entangled photon generation using a fiber optic Mach-Zehnder interferometer incorporating the nonlinear effect in a fiber ring resonator

Preecha P. Yupapin, Suebtarkul Suchat

A new system for entangled photon-pair generation using an all-fiber optic scheme consists of a fiber optic Mach-Zehnder interferometer (MZI) incorporating a fiber optic ring resonator. The Kerr nonlinearity effect in the fiber ring resonator is exploited for the generation of two independent squeezed beams. The advantage of such a system is that it requires a simple arrangement without any optical pumping parts or bulky optical components. Polarized light pulse trains are launched randomly into a MZI, and one part of the light is delayed in the longer path. The output pulses from both arms of the MZI enter a fiber optic ring resonator. A polarization controller controls the polarization states of the light pulses while they circulate in the ring resonator. The superposition of the nonlinear light pulses in a fiber optic ring resonator randomly occur. These forms are seen on an avalanche photodetector. The results are in good agreement with previous work.

Journal of Nanophotonics•Jan 1, 2007•35 citations

Stopping and storing light pulses within a fiber optic ring resonator

Suhailin, A. F. Ali, Yupapin +3 more

A simple all optical system for stopping and storing light pulses is demonstrated. The system consists of an erbium-doped fiber amplifier (EDFA), a semiconductor optical amplifier (SOA), and a fiber ring resonator. The results show that the multisoliton generation with a free spectrum range of 2.4 nm and a pulse spectral width of 0.96 nm is achieved. The memory time of 15 min and the maximum soliton output power of 5.94 dBm are noted, respectively. This means that light pulses can be trapped, i.e., stopped optically within the fiber ring resonator.

Chinese Optics Letters•Jan 1, 2009•0 citations

The entangled photon regeneration and characterization in a nonlinear fiber ring resonator incorporating an erbium-doped fiber

W. Khunnam, Preecha P. Yupapin

A new scheme of the entangled photon states re-generation the dynamic simulation of light traveling in nonlinear fiber optic ring resonator incorporating an erbium-doped fiber (EDF) has been investigated. We have shown that the weak entangled photon states can be recovered after circulating in the amplified fiber optic medium. The output entangled photon states can be re-generated by adjusting the polarization controller of the amplified photons, where the re-generated entangled states can be controlled and performed. The ring-cavity lifetime is much longer than the Kerr-effect response time of the fiber ring. The results obtained have shown that this system can be used to achieve the recovered polarization entangled states with the obtained high gain. The amplifying noise has also been detected and seen on the spectrum output. This is affected to the entangled photon visibility, which is discussed.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 24, 2008•0 citations

All-fiber photon-pair source for practical quantum communications

Prem Kumar, Marco Fiorentino B, Paul L. Voss +1 more

Q uantum entanglement refers to the nonclassical dependency of physically separated quantum systems. It is an essential resource that must be freely available for implementing many of the novel functions of quantum information processing, such as database searching, clock synchronization, teleportation, computing and cryptography.1 The efficient generation and transmission of quantum entanglement is therefore of prime importance. With the ubiquitous standard optical fiber serving as the transmission medium and the widespread availability of efficient active and passive fiber devices, technological synergy between the generation and propagation components of the overall quantum network can be achieved by deploying sources of entanglement that rely on the nonlinearity of the fiber itself. Such fiber-based sources of quantum entanglement would also have the advantage of modal purity over their crystal counterparts,2,3 which is very important for realizing complex networks that involve many quantum operations. In our quest to develop fiber-based devices for quantum information processing, we have recently demonstrated an allfiber source of quantum-correlated photon pairs.4 The operating physical mechanism in this source is nondegenerate fourphoton mixing, wherein two pump photons scatter through the Kerr nonlinearity of the fiber to create simultaneous signal and idler photons. Our experiment is conducted near the zero-dispersion wavelength of standard dispersion-shifted fiber, where such scattering is enhanced owing to phase matching of the photon wave functions. It must be pointed out here that in a conventional wavelength-divisionmultiplexed classical optical communication line, one strives to suppress the fourphoton or four-wave mixing process, which otherwise causes cross talk between the wavelength channels and sets limits on the total data capacity of the communication line. In our experiment, the four-photon mixing takes place in a nonlinear-fiber Sagnac interferometer (NFSI), which we previously used to generate quantum-correlated twin beams in the fiber.5 The pump is a mode-locked train of ~3-ps-long pulses. The pulsed operation serves two important purposes: the NFSI amplifier can be operated at low average powers and the production of the signal/ idler fluorescence photons is confined to well-defined temporal windows, allowing use of a gated detection scheme to increase the signal-to-noise ratio. To measure the nonclassical (i.e., quantum) correlations between the signal and the idler photons, one must effectively suppress the pump photons from reaching the detectors. Since a typical pump pulse contains ~108 photons and we are interested in detecting ~0.01 signal (idler) photons/pulse, a pump-to-signal (idler) rejection ratio in excess of 100 dB is required. We achieved this specification by sending the fluorescence photons through a free-space double-grating spectral filter that separates the signal and idler photons from each other and from the pump photons not rejected by the NFSI. To demonstrate the quantum nature of the four-photon scattering at the single photon level, we assembled a photonFigure 1.C oincidence rates as a function of the single-photon rates in two different cases: signalidler fluorescence produced by a pump pulse (diamonds) and signal-idler fluorescence produced by two consecutive pump pulses (triangles). T he line represents the calculated accidental counts. T he inset shows a plot of the detected idler photons as a function of the injected pump photons (hollow circles). A second-order polynomial is shown to fit the experimental data. T he contributions of the dark counts, linear scattering and quadratic scattering are plotted separately as well. counting apparatus for detecting the signal and idler photons in coincidence. This apparatus is based on commercial InGaAs avalanche photodiodes operating in the gated Geiger mode.4 In the inset in Fig. 1, we show the number of scattered photons, NS, versus the number of pump photons, NP, injected into the NFSI. We fit the experimental data with a second-order polynomial fit, including the number of dark counts during the gate interval, ND. The fit clearly shows that the quadratic scattering ( ∝NP) in the fiber can dominate over the residual linear scattering ( ∝NP) of the pump, owing to imperfect filtering. The main body of Fig. 1 shows the coincidence-counting results. The diamonds represent the rate of coincidence counts versus the rate of the signal (idler) photons generated during the same pump pulse. The triangles represent the measured coincidence rate versus the signalphoton count rate when the signal is delayed with respect to the idler by one pulse period. For two independent photon sources, each with a count rate RS <<1, the accidental coincidence rate RC is given by RC = RS 2, regardless of the photon statistics of the sources. This quadratic relation is plotted as the solid line in Fig. 1, which fits the delayed-coincidence data (triangles) very well. These measurements show that while the fluorescence photons produced by the adjacent pump pulses are independent, those coming from the same pump pulse show a strong correlation, which is a signature of their non-classical behavior. This work was supported by the Department of Defense Multidisciplinary University Research Initiative program administered by the Army Research Office under Grants DAAD19-00-1-0177 and DAAD19-00-1-0469, and by the U.S. Office of Naval Research under Grant N00014-91-J-1268.

•Jan 1, 2002•5 citations

Bistability and other effects in a nonlinear fiber-optic ring resonator

Robert M. Shelby, M. D. Levenson, Stephen H. Perlmutter

Dispersive optical bistability with a threshold cw input power of approximately 10 mW has been observed in a single-mode fiber-optic ring resonator. Light is coupled in and out of the resonator by a single-mode-fiber variable directional coupler. A fiber-optic Faraday isolator is incorporated into the ring, thus increasing the threshold for stimulated Brillouin oscillation by a factor of 100 and permitting other weaker nonlinear effects such as bistability to be observed. Phase-sensitive amplification and deamplification (squeezing) of classical time-stationary noise is demonstrated and shown to be in agreement with the theory of squeezed-state generation in such a nonlinear fiber ring resonator. Light scattering by elastic eigenmodes of the fiber (guided-acoustic-wave Brillouin scattering, GAWBS) adds noise to light circulating in the resonator and obscures the observation of squeezed quantum fluctuations. The properties of this GAWBS scattering are investigated and compared with theory.

Journal of the Optical Society of America B•Feb 1, 1988•31 citations
Photons source generated by light pulses tapping in a fiber optic rinvg resonator is presented. Light pulses from OTDR were launched into a single mode fiber optic, which was a form of a ring resonator. All fiber optic components were connected and used to realize the practical in quantum information via fiber optic. Light pulses were trapped in the ring resonator in a period of time, i.e. memor time, before the S/N ratio of the detected signal was not valid. Results obtained have shown that number of pulse/phton trains obtained depend on a fiber optic ring resonator length, input pulse width and gain. In applications, the signal amplifier using inline connection with fiber laser could be used to amaintain the required S/N. The attenuation part could be employed into the system to produce a single photon pulse during the circulation in fiber optic ring resonator. The photon visibility in term of polarization extinction ratio of 10 dB is noted.
A new technique of an entangled photon pair generation using an all fiber optic scheme is presented. The proposed system is consisted of a fiber optic Mach-Zehnder interferometer (MZI) incorporating with a fiber optic ring resonator. The Kerr nonlinearity effect in the fiber ring resonator is exploited for the generation of two independent squeezed beams. The advantage of such a system is that it requires a simple arrangement without any optical pumping part and bulky optical components. Polarized light pulse trains are launched randomly into a MZI which one part of them is delayed in the longer path. The output pulses from both arms of the MZI are entered into a nonlinear fiber optic ring resonator. Where the superpositions of light pulses in a nonlinear fiber optics ring resonator are randomly occurred which is formed the entangled photon pairs. A polarization controller controls polarization states of light pulses while circulating in the ring resonator. The entangled photons are seen on the avalanche photo-detector, which is shown in good agreement with the previous works.
A new system for entangled photon-pair generation using an all-fiber optic scheme consists of a fiber optic Mach-Zehnder interferometer (MZI) incorporating a fiber optic ring resonator. The Kerr nonlinearity effect in the fiber ring resonator is exploited for the generation of two independent squeezed beams. The advantage of such a system is that it requires a simple arrangement without any optical pumping parts or bulky optical components. Polarized light pulse trains are launched randomly into a MZI, and one part of the light is delayed in the longer path. The output pulses from both arms of the MZI enter a fiber optic ring resonator. A polarization controller controls the polarization states of the light pulses while they circulate in the ring resonator. The superposition of the nonlinear light pulses in a fiber optic ring resonator randomly occur. These forms are seen on an avalanche photodetector. The results are in good agreement with previous work.
A simple all optical system for stopping and storing light pulses is demonstrated. The system consists of an erbium-doped fiber amplifier (EDFA), a semiconductor optical amplifier (SOA), and a fiber ring resonator. The results show that the multisoliton generation with a free spectrum range of 2.4 nm and a pulse spectral width of 0.96 nm is achieved. The memory time of 15 min and the maximum soliton output power of 5.94 dBm are noted, respectively. This means that light pulses can be trapped, i.e., stopped optically within the fiber ring resonator.
A new scheme of the entangled photon states re-generation the dynamic simulation of light traveling in nonlinear fiber optic ring resonator incorporating an erbium-doped fiber (EDF) has been investigated. We have shown that the weak entangled photon states can be recovered after circulating in the amplified fiber optic medium. The output entangled photon states can be re-generated by adjusting the polarization controller of the amplified photons, where the re-generated entangled states can be controlled and performed. The ring-cavity lifetime is much longer than the Kerr-effect response time of the fiber ring. The results obtained have shown that this system can be used to achieve the recovered polarization entangled states with the obtained high gain. The amplifying noise has also been detected and seen on the spectrum output. This is affected to the entangled photon visibility, which is discussed.
Q uantum entanglement refers to the nonclassical dependency of physically separated quantum systems. It is an essential resource that must be freely available for implementing many of the novel functions of quantum information processing, such as database searching, clock synchronization, teleportation, computing and cryptography.1 The efficient generation and transmission of quantum entanglement is therefore of prime importance. With the ubiquitous standard optical fiber serving as the transmission medium and the widespread availability of efficient active and passive fiber devices, technological synergy between the generation and propagation components of the overall quantum network can be achieved by deploying sources of entanglement that rely on the nonlinearity of the fiber itself. Such fiber-based sources of quantum entanglement would also have the advantage of modal purity over their crystal counterparts,2,3 which is very important for realizing complex networks that involve many quantum operations. In our quest to develop fiber-based devices for quantum information processing, we have recently demonstrated an allfiber source of quantum-correlated photon pairs.4 The operating physical mechanism in this source is nondegenerate fourphoton mixing, wherein two pump photons scatter through the Kerr nonlinearity of the fiber to create simultaneous signal and idler photons. Our experiment is conducted near the zero-dispersion wavelength of standard dispersion-shifted fiber, where such scattering is enhanced owing to phase matching of the photon wave functions. It must be pointed out here that in a conventional wavelength-divisionmultiplexed classical optical communication line, one strives to suppress the fourphoton or four-wave mixing process, which otherwise causes cross talk between the wavelength channels and sets limits on the total data capacity of the communication line. In our experiment, the four-photon mixing takes place in a nonlinear-fiber Sagnac interferometer (NFSI), which we previously used to generate quantum-correlated twin beams in the fiber.5 The pump is a mode-locked train of ~3-ps-long pulses. The pulsed operation serves two important purposes: the NFSI amplifier can be operated at low average powers and the production of the signal/ idler fluorescence photons is confined to well-defined temporal windows, allowing use of a gated detection scheme to increase the signal-to-noise ratio. To measure the nonclassical (i.e., quantum) correlations between the signal and the idler photons, one must effectively suppress the pump photons from reaching the detectors. Since a typical pump pulse contains ~108 photons and we are interested in detecting ~0.01 signal (idler) photons/pulse, a pump-to-signal (idler) rejection ratio in excess of 100 dB is required. We achieved this specification by sending the fluorescence photons through a free-space double-grating spectral filter that separates the signal and idler photons from each other and from the pump photons not rejected by the NFSI. To demonstrate the quantum nature of the four-photon scattering at the single photon level, we assembled a photonFigure 1.C oincidence rates as a function of the single-photon rates in two different cases: signalidler fluorescence produced by a pump pulse (diamonds) and signal-idler fluorescence produced by two consecutive pump pulses (triangles). T he line represents the calculated accidental counts. T he inset shows a plot of the detected idler photons as a function of the injected pump photons (hollow circles). A second-order polynomial is shown to fit the experimental data. T he contributions of the dark counts, linear scattering and quadratic scattering are plotted separately as well. counting apparatus for detecting the signal and idler photons in coincidence. This apparatus is based on commercial InGaAs avalanche photodiodes operating in the gated Geiger mode.4 In the inset in Fig. 1, we show the number of scattered photons, NS, versus the number of pump photons, NP, injected into the NFSI. We fit the experimental data with a second-order polynomial fit, including the number of dark counts during the gate interval, ND. The fit clearly shows that the quadratic scattering ( ∝NP) in the fiber can dominate over the residual linear scattering ( ∝NP) of the pump, owing to imperfect filtering. The main body of Fig. 1 shows the coincidence-counting results. The diamonds represent the rate of coincidence counts versus the rate of the signal (idler) photons generated during the same pump pulse. The triangles represent the measured coincidence rate versus the signalphoton count rate when the signal is delayed with respect to the idler by one pulse period. For two independent photon sources, each with a count rate RS <<1, the accidental coincidence rate RC is given by RC = RS 2, regardless of the photon statistics of the sources. This quadratic relation is plotted as the solid line in Fig. 1, which fits the delayed-coincidence data (triangles) very well. These measurements show that while the fluorescence photons produced by the adjacent pump pulses are independent, those coming from the same pump pulse show a strong correlation, which is a signature of their non-classical behavior. This work was supported by the Department of Defense Multidisciplinary University Research Initiative program administered by the Army Research Office under Grants DAAD19-00-1-0177 and DAAD19-00-1-0469, and by the U.S. Office of Naval Research under Grant N00014-91-J-1268.
Dispersive optical bistability with a threshold cw input power of approximately 10 mW has been observed in a single-mode fiber-optic ring resonator. Light is coupled in and out of the resonator by a single-mode-fiber variable directional coupler. A fiber-optic Faraday isolator is incorporated into the ring, thus increasing the threshold for stimulated Brillouin oscillation by a factor of 100 and permitting other weaker nonlinear effects such as bistability to be observed. Phase-sensitive amplification and deamplification (squeezing) of classical time-stationary noise is demonstrated and shown to be in agreement with the theory of squeezed-state generation in such a nonlinear fiber ring resonator. Light scattering by elastic eigenmodes of the fiber (guided-acoustic-wave Brillouin scattering, GAWBS) adds noise to light circulating in the resonator and obscures the observation of squeezed quantum fluctuations. The properties of this GAWBS scattering are investigated and compared with theory.