Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Optics

Maximizing the opening of eye diagrams for slow-light systems

Ravi Pant, Michael D. Stenner, Mark Allen Neifeld, Zhimin Shi, Robert W. Boyd, Daniel J. Gauthier

Published Sep 5, 2007• 31 citations
Publisher

Abstract

We present a data-fidelity metric for quantifying distortion in slow-light optical pulse delay devices. We demonstrate the utility of this metric by applying it to the performance optimization of gain-based slow-light delay systems for Gaussian and super-Gaussian pulses. Symmetric Lorentzian double-line and triple-line gain systems are optimized and achieve maximum delay of 1.5 and 1.7 times the single-line gain system delay, respectively. The resulting double-line gain system design is qualitatively similar to the double-line gain system designed with a previous metric, but is tuned specifically to constrain data fidelity.

DOI
10.1364/ao.46.006513

Related papers

Distortion management in slow-light pulse delay

Michael D. Stenner, Mark Allen Neifeld, Zhaoming Zhu +2 more

We describe a methodology to maximize slow-light pulse delay subject to a constraint on the allowable pulse distortion. We show that optimizing over a larger number of physical variables can increase the distortion-constrained delay. We demonstrate these concepts by comparing the optimum slow-light pulse delay achievable using a single Lorentzian gain line with that achievable using a pair of closely-spaced gain lines. We predict that distortion management using a gain doublet can provide approximately a factor of 2 increase in slow-light pulse delay as compared with the optimum single-line delay. Experimental results employing Brillouin gain in optical fiber confirm our theoretical predictions.

Optics Express•Jan 1, 2005•162 citations

Design of a tunable time-delay element using multiple gain lines for increased fractional delay with high data fidelity

Zhimin Shi, Ravi Pant, Zhaoming Zhu +4 more

A slow-light medium based on multiple, closely spaced gain lines is studied. The spacings and relative strengths of the gain lines are optimized by using the criteria of gain penalty and eye-opening penalty to maximize the fractional delay defined in terms of the best decision time for random pulse trains. Both numerical calculations and experiments show that an optimal design of a triple-gain-line medium can achieve a maximal fractional delay about twice that which can be obtained with a single-gain-line medium, at three times higher modulation bandwidth, while high data fidelity is still maintained.

Optics Letters•Jul 3, 2007•61 citations

Designing optimal gain profiles for slow-light applications

Ravi Pant, Michael D. Stenner, Mark Allen Neifeld

We present the methodology for designing the optimal gain profiles for slow-light systems under the given system constraints. Optimal system designs for the multiple Lorentzian gain lines make the gain spectrum uniform over larger bandwidth compared to the single-line gain system. The design procedure for the multiple-line gain systems is modified to make the gain spectrum uniform over arbitrarily broad bandwidth and applied to the design of the gain-only and gain+absorption slow-light media. The optimization of the triple-line gain system improves the delay-bandwidth product 1.7 times the delay-bandwidth product for the single-line gain system. For the broadband slow-light system, the optimal gain + absorption design and the optimal gain-only design improve the fractional delay performance by factors of 1.8 and 1.4, respectively, compared to the Gaussian noise pump broadened (GNPB) system.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 8, 2007•4 citations

Optimal pump profile designs for broadband SBS slow-light systems

Ravi Pant, Michael D. Stenner, Mark Allen Neifeld +1 more

We describe a methodology for designing the optimal gain profiles for gain-based, tunable, broadband, slow-light pulse delay devices based on stimulated Brillouin scattering. Optimal gain profiles are obtained under system constraints such as distortion, total pump power, and maximum gain. The delay performance of three candidate systems: Gaussian noise pump broadened (GNPB), optimal gain-only, and optimal gain+absorption are studied using Gaussian and super-Gaussian pulses. For the same pulse bandwidth, we find that the optimal gain+absorption medium improves the delay performance by 2.1 times the GNPB medium delay and 1.3 times the optimal gain-only medium delay for Gaussian pulses. For the super-Gaussian pulses the optimal gain-only medium provides a fractional pulse delay 1.8 times the GNPB medium delay.

Optics Express•Jan 1, 2008•79 citations

A VARIETY OF SLOW-LIGHT TECHNOLOGIES IN NONLINEAR DISPERSIVE MEDIA

Myungjun Lee

Over the past few years, researchers have directed a significant amount of effort towards realizing tunable all-optical devices using nonlinear optical methods. It is now possible to exercise dynamic control of the group velocity of light traveling through a wide variety of material systems. The slow and fast light refer to situations in which the group velocity íg of an optical pulse through a dispersive material can be made to be smaller and larger, respectively, than the phase velocity vp = c/n. This ability could overcome the remaining challenge in current optical networks of storing and manipulating an optical signal directly in optical domain so as to avoid a bottleneck due to optical-to-electrical (O/E) and electrical-to-optical (E/O) conversions. The overall purpose of the dissertation is to study novel slow-light systems that provide controlled generation of large pulse delays relative to the pulse width with minimal pulse shape distortion by optimally design resonance profiles of such systems. The system design studies utilize several measures of performance such as the fractional delay, power throughput, and signal distortion under the limited system resource constraints. To this end, powerful data fidelity metrics are required to quantify the performance of tunable delay devices. Here, a new framework for measuring an information velocity and throughput is described and implemented using Shannon mutual information concepts. This new technique is used to investigate trends, trade-offs, and limits in slow light devices, which are physically sensible and in good agreement with analyses obtained using a conventional eye-opening(EO) metric. Using these information-theoretic and/or conventional metrics, we present the quantifying performance of gain-based stimulated Brillouin scattering (SBS) system in optical fibers as well as optical passive devices such as Fabry-Perot, fiber Bragg gratings, and ring resonators. It is shown that combining the SBS gain medium with these passive devices can compensate their respective disadvantages and thus increase delay performance without using additional resource of SBS pump power. The results show the possibility of achieving a fractional delay up to 10 at a signal bandwidth up to tens of GHz.

•Jan 1, 2010•0 citations

A Data-Fidelity Metric for Designing Slow-Light Media

Michael D. Stenner, Ravi Pant, Mark Allen Neifeld

In slow light systems, increasing the delay-bandwidth product also increases distortion. We present a distortion metric that is directly related to data fidelity and can be used to design slow-light media under a bit-error-rate constraint.

Frontiers in Optics•Jan 1, 2006•0 citations
We present a data-fidelity metric for quantifying distortion in slow-light optical pulse delay devices. We demonstrate the utility of this metric by applying it to the performance optimization of gain-based slow-light delay systems for Gaussian and super-Gaussian pulses. Symmetric Lorentzian double-line and triple-line gain systems are optimized and achieve maximum delay of 1.5 and 1.7 times the single-line gain system delay, respectively. The resulting double-line gain system design is qualitatively similar to the double-line gain system designed with a previous metric, but is tuned specifically to constrain data fidelity.
We describe a methodology to maximize slow-light pulse delay subject to a constraint on the allowable pulse distortion. We show that optimizing over a larger number of physical variables can increase the distortion-constrained delay. We demonstrate these concepts by comparing the optimum slow-light pulse delay achievable using a single Lorentzian gain line with that achievable using a pair of closely-spaced gain lines. We predict that distortion management using a gain doublet can provide approximately a factor of 2 increase in slow-light pulse delay as compared with the optimum single-line delay. Experimental results employing Brillouin gain in optical fiber confirm our theoretical predictions.
A slow-light medium based on multiple, closely spaced gain lines is studied. The spacings and relative strengths of the gain lines are optimized by using the criteria of gain penalty and eye-opening penalty to maximize the fractional delay defined in terms of the best decision time for random pulse trains. Both numerical calculations and experiments show that an optimal design of a triple-gain-line medium can achieve a maximal fractional delay about twice that which can be obtained with a single-gain-line medium, at three times higher modulation bandwidth, while high data fidelity is still maintained.
We present the methodology for designing the optimal gain profiles for slow-light systems under the given system constraints. Optimal system designs for the multiple Lorentzian gain lines make the gain spectrum uniform over larger bandwidth compared to the single-line gain system. The design procedure for the multiple-line gain systems is modified to make the gain spectrum uniform over arbitrarily broad bandwidth and applied to the design of the gain-only and gain+absorption slow-light media. The optimization of the triple-line gain system improves the delay-bandwidth product 1.7 times the delay-bandwidth product for the single-line gain system. For the broadband slow-light system, the optimal gain + absorption design and the optimal gain-only design improve the fractional delay performance by factors of 1.8 and 1.4, respectively, compared to the Gaussian noise pump broadened (GNPB) system.
We describe a methodology for designing the optimal gain profiles for gain-based, tunable, broadband, slow-light pulse delay devices based on stimulated Brillouin scattering. Optimal gain profiles are obtained under system constraints such as distortion, total pump power, and maximum gain. The delay performance of three candidate systems: Gaussian noise pump broadened (GNPB), optimal gain-only, and optimal gain+absorption are studied using Gaussian and super-Gaussian pulses. For the same pulse bandwidth, we find that the optimal gain+absorption medium improves the delay performance by 2.1 times the GNPB medium delay and 1.3 times the optimal gain-only medium delay for Gaussian pulses. For the super-Gaussian pulses the optimal gain-only medium provides a fractional pulse delay 1.8 times the GNPB medium delay.
Over the past few years, researchers have directed a significant amount of effort towards realizing tunable all-optical devices using nonlinear optical methods. It is now possible to exercise dynamic control of the group velocity of light traveling through a wide variety of material systems. The slow and fast light refer to situations in which the group velocity íg of an optical pulse through a dispersive material can be made to be smaller and larger, respectively, than the phase velocity vp = c/n. This ability could overcome the remaining challenge in current optical networks of storing and manipulating an optical signal directly in optical domain so as to avoid a bottleneck due to optical-to-electrical (O/E) and electrical-to-optical (E/O) conversions. The overall purpose of the dissertation is to study novel slow-light systems that provide controlled generation of large pulse delays relative to the pulse width with minimal pulse shape distortion by optimally design resonance profiles of such systems. The system design studies utilize several measures of performance such as the fractional delay, power throughput, and signal distortion under the limited system resource constraints. To this end, powerful data fidelity metrics are required to quantify the performance of tunable delay devices. Here, a new framework for measuring an information velocity and throughput is described and implemented using Shannon mutual information concepts. This new technique is used to investigate trends, trade-offs, and limits in slow light devices, which are physically sensible and in good agreement with analyses obtained using a conventional eye-opening(EO) metric. Using these information-theoretic and/or conventional metrics, we present the quantifying performance of gain-based stimulated Brillouin scattering (SBS) system in optical fibers as well as optical passive devices such as Fabry-Perot, fiber Bragg gratings, and ring resonators. It is shown that combining the SBS gain medium with these passive devices can compensate their respective disadvantages and thus increase delay performance without using additional resource of SBS pump power. The results show the possibility of achieving a fractional delay up to 10 at a signal bandwidth up to tens of GHz.