Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Experimental and Theoretical Physics Letters

Superconducting subterahertz fast nanoswitch

L. S. Kuzmin, Michael A. Tarasov, Ernst Otto, Alexei Kalabukhov, G. Yassin, Paul Grimes, Philip D. Mauskopf

Published Oct 1, 2007• 3 citations
Publisher

Abstract

A superconducting thin-film nanoswitch for the subterahertz frequency range has been proposed, developed, fabricated, and tested. The switch makes it possible to modulate the microwave signal or switch it between two branches of a circuit with low losses and high speed. The switch can be naturally integrated with superconducting high-sensitive detectors. Its application makes it possible to avoid the use of massive slow mechanical modulators and to improve the measurement accuracy in decisive astrophysical experiments such as the investigation of the anisotropy of the cosmic microwave background.

DOI
10.1134/s0021364007160138

Related papers

Superconducting microwave resonant circuits for the detection of photons from microwaves through gamma rays

K. D. Irwin, J. Gao, Gene C Hilton +2 more

Summary form only given, as follows. Thin-film superconducting microwave resonators play an important role in large superconducting cameras for applications ranging from cosmology to nuclear non-proliferation. The high quality factor and low loss of these devices make it possible to couple many resonators to a single feedline, enabling frequency-division multiplexing of large arrays. We review the use of superconducting microwave resonators for both microwave kinetic inductance detectors and superconducting transition-edge sensors.

IEEE MTT-S International Microwave Symposium digest•Jun 1, 2011•0 citations

Characterization of a simple thin-film superconducting switch

A Leuthold, Ronald T. Wakai, G.K.G. Hohemwarter +1 more

A simple thermally-controlled superconducting switch was developed for switching low-level low-frequency signals. The device was fabricated and tested using different materials for superconductor, control line, and insulating layer. Refractory materials yielded the best combination of performance and ruggedness. Switching speeds of 1 MHz and control currents of 0.3 mA were achieved.>

IEEE Transactions on Applied Superconductivity•Jan 1, 1994•4 citations

Microwave applications of superconducting electronics

Richard W. Ralston

Since the discovery of the high-transition-temperature (T c ) superconductive oxide materials, there has been very substantial progress in the understanding and control of these materials in thin film form. Although the initial projections of rapid and pervasive applicability of the high T c materials in the market place have not been met, the sensibly reproducible synthesis of high-quality thin films on substrate wafers of up to 50.8 mm diameter has generated a wide variety of preprototype microwave components, some of which are already edging into the market place. The current state of the microwave properties of low T c and high T c thin film materials will be reviewed and selected examples of preprototype devices drawn from low T c and high T c technology will be described. These components include transmission lines, filters, mixers and amplifiers for microwave signals, and information processing circuits for wideband analogue and high-speed digital waveforms. Speculation is offered on the long-term applications of superconducting electronics. Despite the substantial progress in materials, much more is required. The technology which must be developed in order to deliver practical superconducting circuits will be highlighted.

Superconductor Science and Technology•Sep 1, 1991•17 citations

Terahertz high-sensitivity superconducting detectors

Shi Sheng-Cai, Jing Li, Wen Zhang +1 more

The terahertz regime, as a last radio window, remains to be fully explored, and astronomical and atmospheric observations in this regime are scientifically important. Like other frequency regimes, developing high-sensitivity detectors (coherent and incoherent) is of particular significance for both ground-based and space-borne facilities. As the coherent detector of choice below 1.4 THz, superconductor-insulator-superconductor (SIS) heterodyne mixers have achieved as high a sensitivity as five times the quantum limit around 1.4 THz. It is, however, still a challenge to developing SIS mixers at frequencies beyond 1.4 THz with considerable transmission loss in superconducting circuits due to the Cooper-pair breaking by energetic photons and increased many difficulties in designing and fabricating. So far, superconducting hot electron bolometer (HEB) mixers have been the most sensitive heterodyne detectors at frequencies above 1.5 THz, and successfully used to detect molecular spectral lines up to 2.5 THz from ground-based and space telescopes. Although spiral-antenna coupled NbN HEB mixers show a good sensitivity in the whole THz frequency range, the directly measured spectral response with Fourier transform spectrometer falls quickly as frequency increases, especially above 3 THz. The terahertz band is also of particular importance to observe astronomical objects such as cosmic microwave background, early distant objects, cold objects and dusty objects. Aiming at such objects, we develop a terahertz imaging array system by combining advanced superconducting detectors such as transition edge sensor (TES) and microwave kinetic inductance detectors (MKIDs), thus the system has a frequency band centred at 350 m, an operational temperature of 0.3 K, and a sensitivity reaching background limit performance for ground-based applications. In addition, it is expected to have some breakthroughs in ultra-sensitive superconducting TES and MKID, low noise multi-channel readout and multiplexing, efficient terahertz-wave coupling technology, and large-scale array system integration. The developed terahertz imaging array system will serve as the next-generation instrument of Dome A 5 m terahertz telescope, conducting a 350 m-band legacy survey for studying the planets, stars, galaxies and cosmology. Besides the application in astronomy, the developed terahertz imaging array system can also be applied to some areas requiring rapid detection such as security, deep space exploration, and biomedical imaging. In this paper, we mainly introduce the superconducting detectors developed at Purple Mountain Observatory and those for international collaborative projects.

Acta Physica Sinica•Jan 1, 2015•8 citations

Superconducting Nonlinear Kinetic Inductance Devices

Kher, Aditya Shreyas

We describe a novel class of devices based on the nonlinearity of the kinetic inductance of a superconducting thin film. By placing a current-dependent inductance in a microwave resonator, small currents can be measured through their effect on the resonator’s frequency. By using a high-resistivity material for the film and nanowires as kinetic inductors, we can achieve a large coefficient of nonlinearity to improve device sensitivity. We demonstrate a current sensitivity of 8 pA/√Hz, making this device useful for transition-edge sensor (TES) readout and other cutting-edge applications. An advantage of these devices is their natural ability to be multiplexed in the frequency domain, enabling large detector arrays for TES-based instruments. A traveling-wave version of the device, consisting of a thin-film microwave transmission line, is also sensitive to small currents as they change the phase length of the line due to their effect on its inductance. We demonstrate a current sensitivity of 5 pA/√Hz for this version of the device, making it also suitable for TES readout as well as other current-detection applications. It has the advantage of multi-gigahertz bandwidth and greater dynamic range, offering a different approach to the resonator version of the device. Finally, we also demonstrate a transmission-line resonator version of the device that combines some of the advantages of the nanowire resonator and the traveling-wave device. This version of the device has high dynamic range but can also be easily multiplexed in the frequency domain. A lumped-element resonator similar to the first device can be placed in a loop configuration to make it sensitive to magnetic fields. We demonstrate an example of such a device whose sensitivity could ultimately reach levels similar to those of state-of-the-art DC SQUIDs, making it potentially useful for many magnetometry applications given its ease of multiplexing. Finally, a similar microwave resonator is shown to exhibit parametric gain of up to 29 dB in the presence of a strong pump tone. The noise performance of this parametric amplifier approaches the quantum limit, making it useful for applications in quantum information and metrology.

•Feb 10, 2017•17 citations

Laser switch for stroboscopic read-out of magnetic flux

Marco Ferrara, Pasquale Carelli, F. Chiarello +3 more

We have realized and tested a fast stroboscopic detector for magnetic flux measurements. The key element of our detector is a hysteretic dc superconducting quantum interference device (SQUID). Stroboscopic read-out of the magnetic flux coupled with the SQUID is accomplished by biasing the SQUID with fast current pulses. The shorter these pulses, the more stroboscopic and less invasive the measurement we are performing. In order to reduce the duration of the current pulses, we take advantage of the superconducting-normal transition induced by laser light in thin superconducting films. The interaction of laser light with superconducting thin films has been investigated thoroughly in the past and many applications have been proposed which rely on the fast typical times with which superconductivity is broken and a resistive behavior arises. We have measured a threshold resolution of 6.9mΦ0 at 4.2 K, and this value corresponds to the thermodynamic limit of the SQUID. The detector has been accurately characterized: An improved and more sensitive version might prove useful for quantum mechanics and quantum computation experiments, for example, in detecting the state of flux qubits.

Review of Scientific Instruments•May 21, 2004•0 citations
A superconducting thin-film nanoswitch for the subterahertz frequency range has been proposed, developed, fabricated, and tested. The switch makes it possible to modulate the microwave signal or switch it between two branches of a circuit with low losses and high speed. The switch can be naturally integrated with superconducting high-sensitive detectors. Its application makes it possible to avoid the use of massive slow mechanical modulators and to improve the measurement accuracy in decisive astrophysical experiments such as the investigation of the anisotropy of the cosmic microwave background.
Summary form only given, as follows. Thin-film superconducting microwave resonators play an important role in large superconducting cameras for applications ranging from cosmology to nuclear non-proliferation. The high quality factor and low loss of these devices make it possible to couple many resonators to a single feedline, enabling frequency-division multiplexing of large arrays. We review the use of superconducting microwave resonators for both microwave kinetic inductance detectors and superconducting transition-edge sensors.
Since the discovery of the high-transition-temperature (T c ) superconductive oxide materials, there has been very substantial progress in the understanding and control of these materials in thin film form. Although the initial projections of rapid and pervasive applicability of the high T c materials in the market place have not been met, the sensibly reproducible synthesis of high-quality thin films on substrate wafers of up to 50.8 mm diameter has generated a wide variety of preprototype microwave components, some of which are already edging into the market place. The current state of the microwave properties of low T c and high T c thin film materials will be reviewed and selected examples of preprototype devices drawn from low T c and high T c technology will be described. These components include transmission lines, filters, mixers and amplifiers for microwave signals, and information processing circuits for wideband analogue and high-speed digital waveforms. Speculation is offered on the long-term applications of superconducting electronics. Despite the substantial progress in materials, much more is required. The technology which must be developed in order to deliver practical superconducting circuits will be highlighted.
The terahertz regime, as a last radio window, remains to be fully explored, and astronomical and atmospheric observations in this regime are scientifically important. Like other frequency regimes, developing high-sensitivity detectors (coherent and incoherent) is of particular significance for both ground-based and space-borne facilities. As the coherent detector of choice below 1.4 THz, superconductor-insulator-superconductor (SIS) heterodyne mixers have achieved as high a sensitivity as five times the quantum limit around 1.4 THz. It is, however, still a challenge to developing SIS mixers at frequencies beyond 1.4 THz with considerable transmission loss in superconducting circuits due to the Cooper-pair breaking by energetic photons and increased many difficulties in designing and fabricating. So far, superconducting hot electron bolometer (HEB) mixers have been the most sensitive heterodyne detectors at frequencies above 1.5 THz, and successfully used to detect molecular spectral lines up to 2.5 THz from ground-based and space telescopes. Although spiral-antenna coupled NbN HEB mixers show a good sensitivity in the whole THz frequency range, the directly measured spectral response with Fourier transform spectrometer falls quickly as frequency increases, especially above 3 THz. The terahertz band is also of particular importance to observe astronomical objects such as cosmic microwave background, early distant objects, cold objects and dusty objects. Aiming at such objects, we develop a terahertz imaging array system by combining advanced superconducting detectors such as transition edge sensor (TES) and microwave kinetic inductance detectors (MKIDs), thus the system has a frequency band centred at 350 m, an operational temperature of 0.3 K, and a sensitivity reaching background limit performance for ground-based applications. In addition, it is expected to have some breakthroughs in ultra-sensitive superconducting TES and MKID, low noise multi-channel readout and multiplexing, efficient terahertz-wave coupling technology, and large-scale array system integration. The developed terahertz imaging array system will serve as the next-generation instrument of Dome A 5 m terahertz telescope, conducting a 350 m-band legacy survey for studying the planets, stars, galaxies and cosmology. Besides the application in astronomy, the developed terahertz imaging array system can also be applied to some areas requiring rapid detection such as security, deep space exploration, and biomedical imaging. In this paper, we mainly introduce the superconducting detectors developed at Purple Mountain Observatory and those for international collaborative projects.
We describe a novel class of devices based on the nonlinearity of the kinetic inductance of a superconducting thin film. By placing a current-dependent inductance in a microwave resonator, small currents can be measured through their effect on the resonator’s frequency. By using a high-resistivity material for the film and nanowires as kinetic inductors, we can achieve a large coefficient of nonlinearity to improve device sensitivity. We demonstrate a current sensitivity of 8 pA/√Hz, making this device useful for transition-edge sensor (TES) readout and other cutting-edge applications. An advantage of these devices is their natural ability to be multiplexed in the frequency domain, enabling large detector arrays for TES-based instruments. A traveling-wave version of the device, consisting of a thin-film microwave transmission line, is also sensitive to small currents as they change the phase length of the line due to their effect on its inductance. We demonstrate a current sensitivity of 5 pA/√Hz for this version of the device, making it also suitable for TES readout as well as other current-detection applications. It has the advantage of multi-gigahertz bandwidth and greater dynamic range, offering a different approach to the resonator version of the device. Finally, we also demonstrate a transmission-line resonator version of the device that combines some of the advantages of the nanowire resonator and the traveling-wave device. This version of the device has high dynamic range but can also be easily multiplexed in the frequency domain. A lumped-element resonator similar to the first device can be placed in a loop configuration to make it sensitive to magnetic fields. We demonstrate an example of such a device whose sensitivity could ultimately reach levels similar to those of state-of-the-art DC SQUIDs, making it potentially useful for many magnetometry applications given its ease of multiplexing. Finally, a similar microwave resonator is shown to exhibit parametric gain of up to 29 dB in the presence of a strong pump tone. The noise performance of this parametric amplifier approaches the quantum limit, making it useful for applications in quantum information and metrology.
We have realized and tested a fast stroboscopic detector for magnetic flux measurements. The key element of our detector is a hysteretic dc superconducting quantum interference device (SQUID). Stroboscopic read-out of the magnetic flux coupled with the SQUID is accomplished by biasing the SQUID with fast current pulses. The shorter these pulses, the more stroboscopic and less invasive the measurement we are performing. In order to reduce the duration of the current pulses, we take advantage of the superconducting-normal transition induced by laser light in thin superconducting films. The interaction of laser light with superconducting thin films has been investigated thoroughly in the past and many applications have been proposed which rely on the fast typical times with which superconductivity is broken and a resistive behavior arises. We have measured a threshold resolution of 6.9mΦ0 at 4.2 K, and this value corresponds to the thermodynamic limit of the SQUID. The detector has been accurately characterized: An improved and more sensitive version might prove useful for quantum mechanics and quantum computation experiments, for example, in detecting the state of flux qubits.