Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Microwave applications of superconducting electronics

Richard W. Ralston

Published Sep 1, 1991• 17 citations
Publisher

Abstract

Since the discovery of the high-transition-temperature (T c ) superconductive oxide materials, there has been very substantial progress in the understanding and control of these materials in thin film form. Although the initial projections of rapid and pervasive applicability of the high T c materials in the market place have not been met, the sensibly reproducible synthesis of high-quality thin films on substrate wafers of up to 50.8 mm diameter has generated a wide variety of preprototype microwave components, some of which are already edging into the market place. The current state of the microwave properties of low T c and high T c thin film materials will be reviewed and selected examples of preprototype devices drawn from low T c and high T c technology will be described. These components include transmission lines, filters, mixers and amplifiers for microwave signals, and information processing circuits for wideband analogue and high-speed digital waveforms. Speculation is offered on the long-term applications of superconducting electronics. Despite the substantial progress in materials, much more is required. The technology which must be developed in order to deliver practical superconducting circuits will be highlighted.

DOI
10.1088/0953-2048/4/9/003

Related papers

Recent progress of superconducting electronics in China

Chunguang Li, Jia Wang, Yun Yi Wu +18 more

It has been nearly 110 years since the discovery of superconductors, and more than 30 years since the discovery of high temperature superconductors (HTS). Great progress has been made in the application of superconducting electronics in the last two decades. HTS microwave devices have shown much higher perfomance than the traditional ones and have found their ways to the industry applications in mobile communication, radar, and special communication applications. Owing to the ultrahigh sensitivity to magnetic fields and currents, superconducting quantum interference devices (SQUIDs) have been used as the irresplacible sensors in geological surveying, magnetic resonanc imaging, biomagnetic imaging, and other areas. The sensitivity of superconducting radiation detectors such as superconducting SIS mixer, superconducting hot electron bolometer, superconducting transition edge sensor, superconducting nanowire single photon detector, and superconducting microwave kinetic inductance detector are near the quantum limitation. They are now key technology in geophysics, astrophysics, quantum information science, biomedicine, and so on. Superconducting Josephson parametric amplifier has become a key element for superconducting quantum computing. Superconducting integrated circuit has been included in the international roadmap for devices and systems, and shows that having the potential to become one of the mainstreams for post-Moore information processing technology. In metrology, superconducting Josephson effect and Josephson junction array devices have been widely used in the redefinition of quantum voltage reference and basic units of the International system of Units. Superconducting electronics plays an important role in the current quantum information technology boom, which in turn promotes the development of superconducting electronics. This review will brief introduce the research and application of superconducting electronics in China in recent years.

Acta Physica Sinica•Dec 29, 2020•13 citations

Fabrication and Characterization of Superconducting Resonators

Giuseppe Cataldo, Emily M. Barrentine, Ari-David Brown +3 more

Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.

Journal of Visualized Experiments•May 21, 2016•1 citation

Fabrication and Characterization of Superconducting Resonators

Giuseppe Cataldo, Emily M. Barrentine, Ari-David Brown +3 more

Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.

Journal of Visualized Experiments•May 21, 2016•3 citations

Superconducting microwave resonant circuits for the detection of photons from microwaves through gamma rays

K. D. Irwin, J. Gao, Gene C Hilton +2 more

Summary form only given, as follows. Thin-film superconducting microwave resonators play an important role in large superconducting cameras for applications ranging from cosmology to nuclear non-proliferation. The high quality factor and low loss of these devices make it possible to couple many resonators to a single feedline, enabling frequency-division multiplexing of large arrays. We review the use of superconducting microwave resonators for both microwave kinetic inductance detectors and superconducting transition-edge sensors.

IEEE MTT-S International Microwave Symposium digest•Jun 1, 2011•0 citations

Fabrication and Characterization of Superconducting Metamaterial Resonators

Haozhi Wang

Superconducting circuits operated at low temperatures have led to rapid advances in quantum information processing as well as quantum optics in the microwave regime. Engineered quantum systems with a dense spectrum of modes coupled to artificial atoms, or qubits, formed from superconducting circuits offer an opportunity to explore large-scale entanglement or perform quantum simulations of many-body phenomena. Recent research efforts into artificial metamaterials have yielded microwave and optical systems with numerous counterintuitive properties, including left-handed transmission, where the group velocity and phase velocity for a wave point in opposite directions. Metamaterial resonators implemented with superconducting thin-film circuits provide a route to generating dense mode spectra in the microwave regime for coupling to qubits. In this thesis, we discuss the implementation of such superconducting metamaterial resonators. First, we derive the dispersion relation for one-dimensional metamaterial transmission lines and we describe the formation of resonators from such lines and their quality factors. Next, we describe the design and fabrication of transmission-line metamaterial resonators using superconducting thin films. We characterize the metamaterials through low-temperature microwave measurements as well as Laser Scanning Microscope (LSM) images of the microwave field distributions in the circuit. We compare these various measurements with numerical simulations of the microwave properties of the circuits, including simulated current density and charge density distributions for the excitation of different resonance modes. Following the successful realization of dense mode spectra in these circuits, we have initiated the first experiments with a superconducting transmon qubit coupled to a metamaterial resonator and we describe our progress in this direction.

•Jan 1, 2018•0 citations

Quantum Sensitivity: Superconducting Quantum Interference Filter-Based Microwave Receivers

Oleg A. Mukhanov, G.V. Prokopenko, Robert R. Romanofsky

Several critical applications of superconducting electronics that have been successfully commercialized are the Josephson voltage standard, superconducting quantum interference device (SQUID) magnetometers, superconductor-insulator-superconductor (SIS) mixers, and analog filters. More recently, digital and mixed-signal circuits based on rapid single flux quantum (RSFQ) logic have also made an impression on the high-speed/high-frequency electronics application markets.

IEEE Microwave Magazine•Sep 1, 2014•29 citations
Since the discovery of the high-transition-temperature (T c ) superconductive oxide materials, there has been very substantial progress in the understanding and control of these materials in thin film form. Although the initial projections of rapid and pervasive applicability of the high T c materials in the market place have not been met, the sensibly reproducible synthesis of high-quality thin films on substrate wafers of up to 50.8 mm diameter has generated a wide variety of preprototype microwave components, some of which are already edging into the market place. The current state of the microwave properties of low T c and high T c thin film materials will be reviewed and selected examples of preprototype devices drawn from low T c and high T c technology will be described. These components include transmission lines, filters, mixers and amplifiers for microwave signals, and information processing circuits for wideband analogue and high-speed digital waveforms. Speculation is offered on the long-term applications of superconducting electronics. Despite the substantial progress in materials, much more is required. The technology which must be developed in order to deliver practical superconducting circuits will be highlighted.
It has been nearly 110 years since the discovery of superconductors, and more than 30 years since the discovery of high temperature superconductors (HTS). Great progress has been made in the application of superconducting electronics in the last two decades. HTS microwave devices have shown much higher perfomance than the traditional ones and have found their ways to the industry applications in mobile communication, radar, and special communication applications. Owing to the ultrahigh sensitivity to magnetic fields and currents, superconducting quantum interference devices (SQUIDs) have been used as the irresplacible sensors in geological surveying, magnetic resonanc imaging, biomagnetic imaging, and other areas. The sensitivity of superconducting radiation detectors such as superconducting SIS mixer, superconducting hot electron bolometer, superconducting transition edge sensor, superconducting nanowire single photon detector, and superconducting microwave kinetic inductance detector are near the quantum limitation. They are now key technology in geophysics, astrophysics, quantum information science, biomedicine, and so on. Superconducting Josephson parametric amplifier has become a key element for superconducting quantum computing. Superconducting integrated circuit has been included in the international roadmap for devices and systems, and shows that having the potential to become one of the mainstreams for post-Moore information processing technology. In metrology, superconducting Josephson effect and Josephson junction array devices have been widely used in the redefinition of quantum voltage reference and basic units of the International system of Units. Superconducting electronics plays an important role in the current quantum information technology boom, which in turn promotes the development of superconducting electronics. This review will brief introduce the research and application of superconducting electronics in China in recent years.
Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.
Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.
Summary form only given, as follows. Thin-film superconducting microwave resonators play an important role in large superconducting cameras for applications ranging from cosmology to nuclear non-proliferation. The high quality factor and low loss of these devices make it possible to couple many resonators to a single feedline, enabling frequency-division multiplexing of large arrays. We review the use of superconducting microwave resonators for both microwave kinetic inductance detectors and superconducting transition-edge sensors.
Superconducting circuits operated at low temperatures have led to rapid advances in quantum information processing as well as quantum optics in the microwave regime. Engineered quantum systems with a dense spectrum of modes coupled to artificial atoms, or qubits, formed from superconducting circuits offer an opportunity to explore large-scale entanglement or perform quantum simulations of many-body phenomena. Recent research efforts into artificial metamaterials have yielded microwave and optical systems with numerous counterintuitive properties, including left-handed transmission, where the group velocity and phase velocity for a wave point in opposite directions. Metamaterial resonators implemented with superconducting thin-film circuits provide a route to generating dense mode spectra in the microwave regime for coupling to qubits. In this thesis, we discuss the implementation of such superconducting metamaterial resonators. First, we derive the dispersion relation for one-dimensional metamaterial transmission lines and we describe the formation of resonators from such lines and their quality factors. Next, we describe the design and fabrication of transmission-line metamaterial resonators using superconducting thin films. We characterize the metamaterials through low-temperature microwave measurements as well as Laser Scanning Microscope (LSM) images of the microwave field distributions in the circuit. We compare these various measurements with numerical simulations of the microwave properties of the circuits, including simulated current density and charge density distributions for the excitation of different resonance modes. Following the successful realization of dense mode spectra in these circuits, we have initiated the first experiments with a superconducting transmon qubit coupled to a metamaterial resonator and we describe our progress in this direction.