Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Dc-characteristics of a high-Tcsuperconducting sigma–delta modulator using interface-engineered Josephson junctions

K. Saitoh, Yoshihisa Soutome, Tokuumi Fukazawa, Katsuaki Takagi

Published Jan 18, 2002• 9 citations
Publisher

Abstract

We fabricated and tested a high-temperature superconducting (HTS) sigma–delta modulator using interface-engineered Josephson junctions. Proper dc-characteristics were obtained with a sampling frequency of 100 GHz at 20 K. To achieve high-speed sampling, Josephson junctions with a higher critical-current normal-resistance product were used. Circuit simulations with thermal noise were performed for the analysis of switching characteristics and SFQ dynamics.

DOI
10.1088/0953-2048/15/2/318

Related papers

Analogue demonstration of a high temperature superconducting sigma-delta modulator with 27 GHz sampling

Martin G. Forrester, B. D. Hunt, Donald L. Miller +2 more

We have successfully fabricated and tested a high temperature superconducting (HTS) sigma-delta modulator for analogue-to-digital conversion. This is the first demonstration of a GHz sampling A-to-D in HTS. The 15-junction single-flux-quantum (SFQ) circuit, fabricated using an epitaxial multilayer HTS process with YBCO/Co-YBCO/YBCO edge junctions, was internally clocked at 27 GHz and used to convert a 5.01 MHz signal. The modulator demonstrated a spur-free dynamic range of more than 75 dB. Two-tone measurements with 5.01 MHz and 5.51 MHz signals demonstrated third-order intermodulation products to be lower than -59 dBc. Demonstration of a functional HTS modulator represents a significant milestone in the development of high dynamic range ADCs suitable for such applications as surveillance radar.

Superconductor Science and Technology•Nov 1, 1999•11 citations

Characterization of HTS SFQ circuits using interface-engineered Josephson junctions

K. Saitoh, Yoshihisa Soutome, Tokuumi Fukazawa +2 more

We fabricated and tested high-temperature superconducting (HTS) rapid-single-flux-quantum (RSFQ) circuits using interface-engineered Josephson junction (IEJ). The characteristics of high-speed operation were examined by voltage-divider operation based on the toggle-flip-flop circuit. An operation at 155 GHz was obtained at 15 K and the proper functioning of the voltage divider was observed up to 27 K. Temperature dependence of the maximum operation speed was analyzed by circuit simulation with thermal-noise sources. To achieve higher speed operation using a Josephson junction with a higher I/sub c/R/sub n/ product, we also fabricated an RSFQ balanced comparator using IEJ; proper switching characteristics of the circuit was confirmed up to 190 GHz at 30 K. The bias condition dependencies were studied based on the circuit simulations in the relationship of the I/sub c/R/sub n/ product. The results of circuit simulation indicate that a Josephson junction with an I/sub c/R/sub n/ product of more than 0.7 mV is required for high-speed operation (100 GHz) in high-temperature range (30-40 K). We believe that the IEJ is a promising junction candidate for realizing high-speed operation in a high-temperature range.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•17 citations

Experimental demonstration of superconducting bandpass delta-sigma modulator

John F. Bulzacchelli, Hae-Seung Lee, James A. Misewich +1 more

Superconducting bandpass delta-sigma (/spl Delta//spl Sigma/) modulators are being developed for direct analog-to-digital conversion of radio frequency signals in the GHz range. Recently we demonstrated operation of a superconducting bandpass /spl Delta//spl Sigma/ modulator with the highest center frequency (2.23 GHz) and sampling rate (up to 45 GHz) reported to date. The test chip used in that experiment includes an integrated acquisition memory, which eliminates the need for very high speed interfacing. This paper describes key implementation details of this complex test chip, which contains 4065 Josephson junctions. The paper also explains how magnetic coupling from large power supply currents can be reduced through the use of optically-isolated current sources with independent grounds. The measured output spectra of the modulator at a 45 GHz sampling rate are presented.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•11 citations

Superconducting bandpass ΔΣ modulator with 2.23-GHz center frequency and 42.6-GHz sampling rate

John F. Bulzacchelli, Hae-Seung Lee, James A. Misewich +1 more

This paper presents a superconducting bandpass /spl Delta//spl Sigma/ modulator for direct analog-to-digital conversion of radio frequency signals in the gigahertz range. The design, based on a 2.23-GHz microstrip resonator and a single flux quantum comparator, exploits several advantages of superconducting electronics: the high quality factor of resonators, the fast switching speed of the Josephson junction, natural quantization of voltage pulses, and high circuit sensitivity. The modulator test chip includes an integrated acquisition memory for capturing output data at sampling rates up to 45 GHz. The small size (256 b) of the acquisition memory limits the frequency resolution of spectra based on standard fast Fourier transforms. Output spectra with enhanced resolution are obtained with a segmented correlation method. At a 42.6-GHz sampling rate, the measured SNR is 49 dB over a 20.8-MHz bandwidth, and a full-scale (FS) input is -17.4 dBm. At a 40.2-GHz sampling rate, the measured in-band noise is -57 dBFS over a 19.6-MHz bandwidth. The modulator test chip contains 4065 Josephson junctions and dissipates 1.9 mW at T=4.2 K.

IEEE Journal of Solid-State Circuits•Dec 1, 2002•21 citations

Feedback-current-injection-type second-order lowpass sigma-delta modulator

S. Hirano, H. Hasegawa, Shuichi Nagasawa +3 more

In order to establish double-loop feedback design, we have fabricated a prototype superconducting double-loop lowpass sigma-delta modulator. For digital feedback gain, multiple flux quanta are produced by a ladder circuit and carried through Josephson Transmission Lines (JTLs) to the feedback driver. The feedback driver consists of a single Josephson junction or two serially-connected junctions. Direct injection of the pulse current from the JTLs through a low-value resistor drives the feedback driver. The sigma-delta modulator was operated at the sampling frequency of 1.1 GHz and the measured power spectrum showed the noise shaping roughly of 12 dB/octave, which is characteristic of the second-order sigma-delta modulator.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•5 citations

High-speed operation of quasi-one junction superconducting quantum interference device based on high-Tc multilayer technology

H. Sugiyama, H. Wakana, Seiji Adachi +2 more

We designed a quasi-one junction superconducting quantum interference device (QOS) based on single-flux-quantum technology using high-Tc superconductors. A circuit containing 10 interface-engineered ramp-edge Josephson junctions was fabricated on a La-substituted YBa2Cu3Oy ground plane. The output voltage as a function of the input current for the QOS indicated correct operation as a periodic comparator at clock frequency of 94 and 77 GHz at 35 and 40 K, respectively. A comparison of the observed maximum operating frequency with the product of the critical current and normal resistance for the junctions suggests that comparator operation above 100 GHz at 40 K is possible if one optimizes the junction parameters.

Applied Physics Letters•Apr 1, 2004•14 citations
We fabricated and tested a high-temperature superconducting (HTS) sigma–delta modulator using interface-engineered Josephson junctions. Proper dc-characteristics were obtained with a sampling frequency of 100 GHz at 20 K. To achieve high-speed sampling, Josephson junctions with a higher critical-current normal-resistance product were used. Circuit simulations with thermal noise were performed for the analysis of switching characteristics and SFQ dynamics.
We have successfully fabricated and tested a high temperature superconducting (HTS) sigma-delta modulator for analogue-to-digital conversion. This is the first demonstration of a GHz sampling A-to-D in HTS. The 15-junction single-flux-quantum (SFQ) circuit, fabricated using an epitaxial multilayer HTS process with YBCO/Co-YBCO/YBCO edge junctions, was internally clocked at 27 GHz and used to convert a 5.01 MHz signal. The modulator demonstrated a spur-free dynamic range of more than 75 dB. Two-tone measurements with 5.01 MHz and 5.51 MHz signals demonstrated third-order intermodulation products to be lower than -59 dBc. Demonstration of a functional HTS modulator represents a significant milestone in the development of high dynamic range ADCs suitable for such applications as surveillance radar.
We fabricated and tested high-temperature superconducting (HTS) rapid-single-flux-quantum (RSFQ) circuits using interface-engineered Josephson junction (IEJ). The characteristics of high-speed operation were examined by voltage-divider operation based on the toggle-flip-flop circuit. An operation at 155 GHz was obtained at 15 K and the proper functioning of the voltage divider was observed up to 27 K. Temperature dependence of the maximum operation speed was analyzed by circuit simulation with thermal-noise sources. To achieve higher speed operation using a Josephson junction with a higher I/sub c/R/sub n/ product, we also fabricated an RSFQ balanced comparator using IEJ; proper switching characteristics of the circuit was confirmed up to 190 GHz at 30 K. The bias condition dependencies were studied based on the circuit simulations in the relationship of the I/sub c/R/sub n/ product. The results of circuit simulation indicate that a Josephson junction with an I/sub c/R/sub n/ product of more than 0.7 mV is required for high-speed operation (100 GHz) in high-temperature range (30-40 K). We believe that the IEJ is a promising junction candidate for realizing high-speed operation in a high-temperature range.
Superconducting bandpass delta-sigma (/spl Delta//spl Sigma/) modulators are being developed for direct analog-to-digital conversion of radio frequency signals in the GHz range. Recently we demonstrated operation of a superconducting bandpass /spl Delta//spl Sigma/ modulator with the highest center frequency (2.23 GHz) and sampling rate (up to 45 GHz) reported to date. The test chip used in that experiment includes an integrated acquisition memory, which eliminates the need for very high speed interfacing. This paper describes key implementation details of this complex test chip, which contains 4065 Josephson junctions. The paper also explains how magnetic coupling from large power supply currents can be reduced through the use of optically-isolated current sources with independent grounds. The measured output spectra of the modulator at a 45 GHz sampling rate are presented.
This paper presents a superconducting bandpass /spl Delta//spl Sigma/ modulator for direct analog-to-digital conversion of radio frequency signals in the gigahertz range. The design, based on a 2.23-GHz microstrip resonator and a single flux quantum comparator, exploits several advantages of superconducting electronics: the high quality factor of resonators, the fast switching speed of the Josephson junction, natural quantization of voltage pulses, and high circuit sensitivity. The modulator test chip includes an integrated acquisition memory for capturing output data at sampling rates up to 45 GHz. The small size (256 b) of the acquisition memory limits the frequency resolution of spectra based on standard fast Fourier transforms. Output spectra with enhanced resolution are obtained with a segmented correlation method. At a 42.6-GHz sampling rate, the measured SNR is 49 dB over a 20.8-MHz bandwidth, and a full-scale (FS) input is -17.4 dBm. At a 40.2-GHz sampling rate, the measured in-band noise is -57 dBFS over a 19.6-MHz bandwidth. The modulator test chip contains 4065 Josephson junctions and dissipates 1.9 mW at T=4.2 K.
In order to establish double-loop feedback design, we have fabricated a prototype superconducting double-loop lowpass sigma-delta modulator. For digital feedback gain, multiple flux quanta are produced by a ladder circuit and carried through Josephson Transmission Lines (JTLs) to the feedback driver. The feedback driver consists of a single Josephson junction or two serially-connected junctions. Direct injection of the pulse current from the JTLs through a low-value resistor drives the feedback driver. The sigma-delta modulator was operated at the sampling frequency of 1.1 GHz and the measured power spectrum showed the noise shaping roughly of 12 dB/octave, which is characteristic of the second-order sigma-delta modulator.
We designed a quasi-one junction superconducting quantum interference device (QOS) based on single-flux-quantum technology using high-Tc superconductors. A circuit containing 10 interface-engineered ramp-edge Josephson junctions was fabricated on a La-substituted YBa2Cu3Oy ground plane. The output voltage as a function of the input current for the QOS indicated correct operation as a periodic comparator at clock frequency of 94 and 77 GHz at 35 and 40 K, respectively. A comparison of the observed maximum operating frequency with the product of the critical current and normal resistance for the junctions suggests that comparator operation above 100 GHz at 40 K is possible if one optimizes the junction parameters.