Low-density Parity check codes (LDPC) are gaining interest for high data rate application in both terrestrial and spatial communications which requires low bit error rate. This paper proposes an algorithm through which the best parity check matrix is obtained for irregular low density parity check codes, which reduces the Bit Error Rate ,Frame Error Rate and computational complexity. Tanner graph also called a bipartite graph format in an Low Density Parity Check (LDPC) code design contains many short cycles; it will produce a computational complexity in a code design process and it degrades the code performance. To overcome this effect, we proposed an new algorithm which obtains a best final parity check matrix. Throughout the paper we will give the detailed description of an efficient algorithm proposed. The complexity is studied graphically and analytically. Using proposed algorithm, cycles of length four observed in corresponding matrix are removed. Each matrix is evaluated over a noisy Additive White Gaussian Noise (AWGN) channel. Bit Error rate and Frame error rate is calculated. The results are compared with randomly generated best parity check matrix. Simulation results shows that proposed method successfully overcomes the computational complexity and meets the near Shannon limit.
Low-density Parity check codes (LDPC) are gaining interest for high data rate application in both terrestrial and spatial communications which requires low bit error rate. This paper proposes an algorithm through which the best parity check matrix is obtained for irregular low density parity check codes, which reduces the Bit Error Rate ,Frame Error Rate and computational complexity. Tanner graph also called a bipartite graph format in an Low Density Parity Check (LDPC) code design contains many short cycles; it will produce a computational complexity in a code design process and it degrades the code performance. To overcome this effect, we proposed an new algorithm which obtains a best final parity check matrix. Throughout the paper we will give the detailed description of an efficient algorithm proposed. The complexity is studied graphically and analytically. Using proposed algorithm, cycles of length four observed in corresponding matrix are removed. Each matrix is evaluated over a noisy Additive White Gaussian Noise (AWGN) channel. Bit Error rate and Frame error rate is calculated. The results are compared with randomly generated best parity check matrix. Simulation results shows that proposed method successfully overcomes the computational complexity and meets the near Shannon limit.
In this paper, a method for constructing Low-Density Parity-Check (LDPC) codes of good performance in terms of Bit Error Rate (BER) using a computer search algorithm is presented. First, LDPC codes and encoding along with its Tanner graph representation is described. Then, a detailed description of the proposed construction algorithm is given. A Modified Shortest-Path (MSP) Algorithm of lower complexity is applied to obtain a code graph of the desired structure. The proposed algorithm works directly on the parity-check matrix of the LDPC code. The parity-check matrix of the code is constructed column by column subject to the bit-degree and girth constraints. Using the proposed algorithm, both regular and irregular LDPC codes have been constructed. Furthermore, not only have the girth been improved but also the rate of LDPC codes. Finally, by simulation results the constructed codes were shown to perform well over an additive white Gaussian noise (AWGN) channel.
To reduce the cycles in the Tanner graph which may affect the code performance,a recursive method to construct low-density parity-check(LDPC) codes was proposed.The method used a parity-check matrix of a short LDPC code as its mother matrix upon which a long code was constructed with circulant permutation matrices.By choosing the circulant permutation matrix parameters properly,the number of cycles having a given length in the Tanner graph of the constructed long codes were equal to or less than that of the short code.Either regular or irregular LDPC codes were constructed.Simulation results show that the LDPC codes constructed by this method have very low error-floor and almost no performance degradation due to their special structure as compared with random LDPC codes.
After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area.
This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.
It is well known that extremely long low-density parity-check (LDPC) codes perform exceptionally well for error correction applications, short-length codes are preferable in practical applications. However, short-length LDPC codes suffer from performance degradation owing to graph-based impairments such as short cycles, trapping sets and stopping sets and so on in the bipartite graph of the LDPC matrix. In particular, performance degradation at moderate to high Eb/N0 is caused by the oscillations in bit node a posteriori probabilities induced by short cycles and trapping sets in bipartite graphs. In this study, a computationally efficient algorithm is proposed to improve the performance of short-length LDPC codes at moderate to high Eb/N0. This algorithm makes use of the information generated by the belief propagation (BP) algorithm in previous iterations before a decoding failure occurs. Using this information, a reliability-based estimation is performed on each bit node to supplement the BP algorithm. The proposed algorithm gives an appreciable coding gain as compared with BP decoding for LDPC codes of a code rate equal to or less than 1/2 rate coding. The coding gains are modest to significant in the case of optimised (for bipartite graph conditioning) regular LDPC codes, whereas the coding gains are huge in the case of unoptimised codes. Hence, this algorithm is useful for relaxing some stringent constraints on the graphical structure of the LDPC code and for developing hardware-friendly designs.
Low-density parity-check (LDPC) codes are gaining interest for high data rate applications in both terrestrial and spatial communications. They can be designed and studied through a bipartite graph whose characteristics affect the performance. This paper proposes a low-complexity method to improve the performance of LDPC codes by selectively removing some cycles from the associated bipartite graph. The method is based on a modified version of the breadth first search (BFS) algorithm that we call modified BFS (MBFS), which is applied to find cycles, and a greedy procedure to eliminate them. Throughout the paper we will give a detailed description of the algorithm proposed and analytically study its complexity. Simulation results show that this girth conditioning method applied to some classes of codes, whose structure allows further optimization, can lead to a significative complexity reduction and a performance improvements with respect to other methods.
Gallager proposed and developed low density parity check (LDPC) codes in the early 1960s. LDPC codes were rediscovered in the early 1990s and shown to be capacity approaching over the additive white Gaussian noise (AWGN) channel. Subsequently, density evolution (DE) optimized symbol node degree distributions were used to significantly improve the decoding performance of short to medium length irregular LDPC codes. Currently, the short to medium length LDPC codes with the lowest error floor are DE optimized irregular LDPC codes constructed using progressive edge growth (PEG) algorithm modifications which are designed to increase the approximate cycle extrinsic message degrees (ACE) in the LDPC code graphs constructed. The aim of the present work is to find efficient means to improve on the error floor performance published for short to medium length irregular LDPC codes over AWGN channels in the literature. An efficient algorithm for determining the girth and ACE distributions in short to medium length LDPC code Tanner graphs has been proposed. A cyclic PEG (CPEG) algorithm which uses an edge connections sequence that results in LDPC codes with improved girth and ACE distributions is presented. LDPC codes with DE optimized/’good’ degree distributions which have larger minimum distances and stopping distances than previously published for LDPC codes of similar length and rate have been found. It is shown that increasing the minimum distance of LDPC codes lowers their error floor performance over AWGN channels; however, there are threshold minimum distances values above which there is no further lowering of the error floor performance. A minimum local girth (edge skipping) (MLG (ES)) PEG algorithm is presented; the algorithm controls the minimum local girth (global girth) connected in the Tanner graphs of LDPC codes constructed by forfeiting some edge connections. A technique for constructing optimal low correlated edge density (OED) LDPC codes based on modified DE optimized symbol node degree distributions and the MLG (ES) PEG algorithm modification is presented. OED rate-½ (n, k)=(512, 256) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. Similarly, consequent to an improved symbol node degree distribution, rate ½ (n, k)=(1024, 512) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. An improved BP/SPA (IBP/SPA) decoder, obtained by making two simple modifications to the standard BP/SPA decoder, has been shown to result in an unprecedented generalized improvement in the performance of short to medium length irregular LDPC codes under iterative message passing decoding. The superiority of the Slepian Wolf distributed source coding model over other distributed source coding models based on LDPC codes has been shown.