Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IET Communications

Performance improvement of short-length regular low-density parity-check codes with low-complexity post-processing

Raghunadh K. Bhattar, K.R. Ramakrishnan, K. S. Dasgupta

Published Oct 16, 2012• 1 citation
Publisher

Abstract

It is well known that extremely long low-density parity-check (LDPC) codes perform exceptionally well for error correction applications, short-length codes are preferable in practical applications. However, short-length LDPC codes suffer from performance degradation owing to graph-based impairments such as short cycles, trapping sets and stopping sets and so on in the bipartite graph of the LDPC matrix. In particular, performance degradation at moderate to high Eb/N0 is caused by the oscillations in bit node a posteriori probabilities induced by short cycles and trapping sets in bipartite graphs. In this study, a computationally efficient algorithm is proposed to improve the performance of short-length LDPC codes at moderate to high Eb/N0. This algorithm makes use of the information generated by the belief propagation (BP) algorithm in previous iterations before a decoding failure occurs. Using this information, a reliability-based estimation is performed on each bit node to supplement the BP algorithm. The proposed algorithm gives an appreciable coding gain as compared with BP decoding for LDPC codes of a code rate equal to or less than 1/2 rate coding. The coding gains are modest to significant in the case of optimised (for bipartite graph conditioning) regular LDPC codes, whereas the coding gains are huge in the case of unoptimised codes. Hence, this algorithm is useful for relaxing some stringent constraints on the graphical structure of the LDPC code and for developing hardware-friendly designs.

DOI
10.1049/iet-com.2011.0292

Related papers

Short-length Low-density Parity-check Codes: Construction and Decoding Algorithms

Cornelius T. Healy

Error control coding is an essential part of modern communications systems. LDPC codes have been demonstrated to offer performance near the fundamental limits of channels corrupted by random noise. Optimal maximum likelihood decoding of LDPC codes is too complex to be practically useful even at short block lengths and so a graph-based message passing decoder known as the belief propagation algorithm is used instead. In fact, on graphs without closed paths known as cycles the iterative message passing decoding is known to be optimal and may converge in a single iteration, although identifying the message update schedule which allows single-iteration convergence is not trivial. At finite block lengths graphs without cycles have poor minimum distance properties and perform poorly even under optimal decoding. LDPC codes with large block length have been demonstrated to offer performance close to that predicted for codes of infinite length, as the cycles present in the graph are quite long. In this thesis, LDPC codes of shorter length are considered as they offer advantages in terms of latency and complexity, at the cost of performance degradation from the increased number of short cycles in the graph. For these shorter LDPC codes, the problems considered are: \n \nFirst, improved construction of structured and unstructured LDPC code graphs of short length with a view to reducing the harmful effects of the cycles on error rate performance, based on knowledge of the decoding process. Structured code graphs are particularly interesting as they allow benefits in encoding and decoding complexity and speed. Secondly, the design and construction of LDPC codes for the block fading channel, a particularly challenging scenario from the point of view of error control code design. Both established and novel classes of codes for the channel are considered. Finally the decoding of LDPC codes by the belief propagation algorithm is considered, in particular the scheduling of messages passed in the iterative decoder. A knowledge-aided approach is developed based on message reliabilities and residuals to allow fast convergence and significant improvements in error rate performance.

•Jul 1, 2014•4 citations

A high‐performance belief propagation decoding algorithm for codes with short cycles

Ali Karimi-lenji, Monireh Houshmand, Fahimeh Zarmehi

Summary The simplicity of decoding is one of the most important characteristics of the low density parity check (LDPC) codes. Belief propagation (BP) decoding algorithm is a well‐known decoding algorithm for LDPC codes. Most LDPC codes with long lengths have short cycles in their Tanner graphs, which reduce the performance of the BP algorithm. In this paper, we present 2 methods to improve the BP decoding algorithm for LDPC codes. In these methods, the calculation of the variable nodes is controlled by using “multiplicative correction factor” and “additive correction factor.” These factors are obtained for 2 separate channels, namely additive white Gaussian noise (AWGN) and binary symmetric channel (BSC), as 2 functions of code and channel parameters. Moreover, we use the BP‐based method in the calculation of the check nodes, which reduces the required resources. Simulation results show the proposed algorithm has better performance and lower decoding error as compared to BP and similar methods like normalized‐BP and offset‐BP algorithms.

International Journal of Communication Systems•Feb 28, 2017•2 citations

Reduced complexity and improved performance decoding algorithm for nonbinary LDPC codes over GF(q)

Xin Chen, Aidong Men

Low-density parity-check (LDPC) codes over finite fields GF(q) have a better performance than those of the binary low-density parity-check codes, at short and medium block lengths, but the decoder of GF(q)-LDPC has more complexity. In this paper, we present a new reduced-complexity belief propagation (BP) decoding algorithm for GF(q)-LDPC codes by analyzing the reliability of code symbols. Instead of update all the variable nodes during iteration, we just update variable nodes which are mostly to be in an error. The algorithm also shows a property to reduce the effects of oscillating on decoding. The simulations prove that we could improve performance and reduce complexity at the same time for short and medium GF(q)-LDPC codes.

IEEE International Conference on Communication Technology (ICCT)•Nov 1, 2008•6 citations

Studies on Lowering the Error Floors of Finite Length LDPC codes

Huanlin Li

Low-density parity-check (LDPC) codes can approach the Shannon limit performance closely, and are becoming one of the most promising channel codes in the Error Control Coding area.The performance of an LDPC code with given length is mainly affected by the sizes of some combinatorial characteristics of its corresponding bipartite graph and the distribution of variable degrees and check node degrees.With the help of the density evolution algorithm, randomly designed LDPC codes, with carefully chosen degree distribution pairs, have been shown to achieve better Shannon capacity performance than their regular counterparts when decoded using the iterative belief propagation (BP) decoding algorithm.However, regular LDPC codes outperform their irregular counterparts in term of their error floors.Therefore, construction of LDPC codes which have both attractive error rate performance and low error floor performance has become an attractive topic.Currently, optimization of variable node degree distribution and check node degree distribution for an LDPC code with given length, which could help the code to achieve good Shannon limit performance, has been extensively studied.In this dissertation, we demonstrate some approaches of improving the error floor performance for a given LDPC code with desired degree distribution pair.The contribution mainly includes three parts.In the first part, the relationship between cycles and unfavorable combinatorial

•Jan 1, 2011•0 citations

Near Optimum Majority-Logic Based Decoding of Low-Density Parity-Check Codes

Telex M. N. Ngatched, Attahiru Sule Alfa, Jun Cai

A reliability-based iterative majority-logic decoding algorithm for regular low-density parity-check (LDPC) codes was recently proposed by Huang et al. In this paper we present an improved version of that algorithm by introducing a different reliability measure for each check-sum of the parity-check matrix, and taking it into account in the computation of the extrinsic information that is used to update the reliability measure of each received bit in each iteration. Some simulations results are given, which show that the new algorithm, while requiring very little additional computational complexity, not only achieves a considerable error performance gain over the standard one, but also, importantly, outperforms the iterative decoding based on belief propagation (IDBP), especially for short and medium block length finite-geometry (FG) LDPC codes.

International Conference on Communications•Jun 1, 2011•3 citations

Row-Boosted Ensemble Belief Propagation for Short LDPC Codes

Paul Bezner, Felix Krieg, Stephan ten Brink

Belief-propagation (BP) decoding of short and moderate-length low-density parity-check (LDPC) codes is limited by finite-length graph effects: a single decoder trajectory can become trapped or oscillatory even when an alternative trajectory would decode the received word. Existing ensemble-BP decoders create the required diversity through multiple parity-check matrices, automorphisms, modified schedules, subcodes, or altered update rules. We introduce row-boosted ensemble (RBE) decoding as a minimal decoder-side diversity mechanism: all ensemble members share the same parity-check matrix and the same BP kernel, and differ only in a small set of parity-check rows whose outgoing messages are boosted. On the 5G~NR BG1 \((144,96)\) code, RBE with \(32\) members lowers the frame-error rate of BP with \(20\) iterations (BP-20) from \(1.6\times10^{-2}\) to \(1.6\times10^{-3}\) at \(E_\mathrm{b}/N_0=4.0\,\mathrm{dB}\), outperforming saturated-min-sum and affine subcode ensembles of equal size. Increasing the ensemble size yields additional gains, indicating that RBE provides a scalable performance-complexity tradeoff. The gains transfer across 5G~NR block lengths and rates, to non-5G short LDPC codes, and across flooding and layered schedules.

arXiv:2608.09560•Aug 10, 2026•0 citations
It is well known that extremely long low-density parity-check (LDPC) codes perform exceptionally well for error correction applications, short-length codes are preferable in practical applications. However, short-length LDPC codes suffer from performance degradation owing to graph-based impairments such as short cycles, trapping sets and stopping sets and so on in the bipartite graph of the LDPC matrix. In particular, performance degradation at moderate to high Eb/N0 is caused by the oscillations in bit node a posteriori probabilities induced by short cycles and trapping sets in bipartite graphs. In this study, a computationally efficient algorithm is proposed to improve the performance of short-length LDPC codes at moderate to high Eb/N0. This algorithm makes use of the information generated by the belief propagation (BP) algorithm in previous iterations before a decoding failure occurs. Using this information, a reliability-based estimation is performed on each bit node to supplement the BP algorithm. The proposed algorithm gives an appreciable coding gain as compared with BP decoding for LDPC codes of a code rate equal to or less than 1/2 rate coding. The coding gains are modest to significant in the case of optimised (for bipartite graph conditioning) regular LDPC codes, whereas the coding gains are huge in the case of unoptimised codes. Hence, this algorithm is useful for relaxing some stringent constraints on the graphical structure of the LDPC code and for developing hardware-friendly designs.
Error control coding is an essential part of modern communications systems. LDPC codes have been demonstrated to offer performance near the fundamental limits of channels corrupted by random noise. Optimal maximum likelihood decoding of LDPC codes is too complex to be practically useful even at short block lengths and so a graph-based message passing decoder known as the belief propagation algorithm is used instead. In fact, on graphs without closed paths known as cycles the iterative message passing decoding is known to be optimal and may converge in a single iteration, although identifying the message update schedule which allows single-iteration convergence is not trivial. At finite block lengths graphs without cycles have poor minimum distance properties and perform poorly even under optimal decoding. LDPC codes with large block length have been demonstrated to offer performance close to that predicted for codes of infinite length, as the cycles present in the graph are quite long. In this thesis, LDPC codes of shorter length are considered as they offer advantages in terms of latency and complexity, at the cost of performance degradation from the increased number of short cycles in the graph. For these shorter LDPC codes, the problems considered are: \n \nFirst, improved construction of structured and unstructured LDPC code graphs of short length with a view to reducing the harmful effects of the cycles on error rate performance, based on knowledge of the decoding process. Structured code graphs are particularly interesting as they allow benefits in encoding and decoding complexity and speed. Secondly, the design and construction of LDPC codes for the block fading channel, a particularly challenging scenario from the point of view of error control code design. Both established and novel classes of codes for the channel are considered. Finally the decoding of LDPC codes by the belief propagation algorithm is considered, in particular the scheduling of messages passed in the iterative decoder. A knowledge-aided approach is developed based on message reliabilities and residuals to allow fast convergence and significant improvements in error rate performance.
Summary The simplicity of decoding is one of the most important characteristics of the low density parity check (LDPC) codes. Belief propagation (BP) decoding algorithm is a well‐known decoding algorithm for LDPC codes. Most LDPC codes with long lengths have short cycles in their Tanner graphs, which reduce the performance of the BP algorithm. In this paper, we present 2 methods to improve the BP decoding algorithm for LDPC codes. In these methods, the calculation of the variable nodes is controlled by using “multiplicative correction factor” and “additive correction factor.” These factors are obtained for 2 separate channels, namely additive white Gaussian noise (AWGN) and binary symmetric channel (BSC), as 2 functions of code and channel parameters. Moreover, we use the BP‐based method in the calculation of the check nodes, which reduces the required resources. Simulation results show the proposed algorithm has better performance and lower decoding error as compared to BP and similar methods like normalized‐BP and offset‐BP algorithms.
Low-density parity-check (LDPC) codes over finite fields GF(q) have a better performance than those of the binary low-density parity-check codes, at short and medium block lengths, but the decoder of GF(q)-LDPC has more complexity. In this paper, we present a new reduced-complexity belief propagation (BP) decoding algorithm for GF(q)-LDPC codes by analyzing the reliability of code symbols. Instead of update all the variable nodes during iteration, we just update variable nodes which are mostly to be in an error. The algorithm also shows a property to reduce the effects of oscillating on decoding. The simulations prove that we could improve performance and reduce complexity at the same time for short and medium GF(q)-LDPC codes.
Low-density parity-check (LDPC) codes can approach the Shannon limit performance closely, and are becoming one of the most promising channel codes in the Error Control Coding area.The performance of an LDPC code with given length is mainly affected by the sizes of some combinatorial characteristics of its corresponding bipartite graph and the distribution of variable degrees and check node degrees.With the help of the density evolution algorithm, randomly designed LDPC codes, with carefully chosen degree distribution pairs, have been shown to achieve better Shannon capacity performance than their regular counterparts when decoded using the iterative belief propagation (BP) decoding algorithm.However, regular LDPC codes outperform their irregular counterparts in term of their error floors.Therefore, construction of LDPC codes which have both attractive error rate performance and low error floor performance has become an attractive topic.Currently, optimization of variable node degree distribution and check node degree distribution for an LDPC code with given length, which could help the code to achieve good Shannon limit performance, has been extensively studied.In this dissertation, we demonstrate some approaches of improving the error floor performance for a given LDPC code with desired degree distribution pair.The contribution mainly includes three parts.In the first part, the relationship between cycles and unfavorable combinatorial
A reliability-based iterative majority-logic decoding algorithm for regular low-density parity-check (LDPC) codes was recently proposed by Huang et al. In this paper we present an improved version of that algorithm by introducing a different reliability measure for each check-sum of the parity-check matrix, and taking it into account in the computation of the extrinsic information that is used to update the reliability measure of each received bit in each iteration. Some simulations results are given, which show that the new algorithm, while requiring very little additional computational complexity, not only achieves a considerable error performance gain over the standard one, but also, importantly, outperforms the iterative decoding based on belief propagation (IDBP), especially for short and medium block length finite-geometry (FG) LDPC codes.
Belief-propagation (BP) decoding of short and moderate-length low-density parity-check (LDPC) codes is limited by finite-length graph effects: a single decoder trajectory can become trapped or oscillatory even when an alternative trajectory would decode the received word. Existing ensemble-BP decoders create the required diversity through multiple parity-check matrices, automorphisms, modified schedules, subcodes, or altered update rules. We introduce row-boosted ensemble (RBE) decoding as a minimal decoder-side diversity mechanism: all ensemble members share the same parity-check matrix and the same BP kernel, and differ only in a small set of parity-check rows whose outgoing messages are boosted. On the 5G~NR BG1 (144,96)(144,96)(144,96) code, RBE with 323232 members lowers the frame-error rate of BP with 202020 iterations (BP-20) from 1.6×10−21.6\times10^{-2}1.6×10−2 to 1.6×10−31.6\times10^{-3}1.6×10−3 at Eb/N0=4.0 dBE_\mathrm{b}/N_0=4.0\,\mathrm{dB}Eb​/N0​=4.0dB, outperforming saturated-min-sum and affine subcode ensembles of equal size. Increasing the ensemble size yields additional gains, indicating that RBE provides a scalable performance-complexity tradeoff. The gains transfer across 5G~NR block lengths and rates, to non-5G short LDPC codes, and across flooding and layered schedules.