A high-power low-noise fiber Brillouin amplifier (FBA) has been demonstrated for slow-light delay buffer. Its features including gain, gain saturation, and noise figure (NF), have been characterized. Among them, the gain saturation is highlighted because it is a fundamental limitation for FBA-based slow-light buffer. It is testified that the gain saturation is more easily achieved for lower signal-to-pump ratio (SPR), and the NF is reduced at higher pump level when below Brillouin threshold. The experiment demonstrated that up to 20-ns delay enhancement could be obtained in this high-power FBA for a -30-dBm input signal, as well as with low NF. Besides, the analysis on how the performance of the high power FBA affects the slow-light delay buffer has been presented.
A high-power low-noise fiber Brillouin amplifier (FBA) has been demonstrated for slow-light delay buffer. Its features including gain, gain saturation, and noise figure (NF), have been characterized. Among them, the gain saturation is highlighted because it is a fundamental limitation for FBA-based slow-light buffer. It is testified that the gain saturation is more easily achieved for lower signal-to-pump ratio (SPR), and the NF is reduced at higher pump level when below Brillouin threshold. The experiment demonstrated that up to 20-ns delay enhancement could be obtained in this high-power FBA for a -30-dBm input signal, as well as with low NF. Besides, the analysis on how the performance of the high power FBA affects the slow-light delay buffer has been presented.
We present a theoretical analysis of the slow-light tunable optical buffers based on fiber Brillouin amplifiers (FBA). Its storage capacity was discussed for return-to-zero (RZ) and non-return-to-zero (NRZ) bit streams. Gain saturation and pulse broadening are two key factors which limit the buffer capacity. Gain saturation is an inherent characteristic of the FBA. Broadening of the amplified pulse always accumulates with increasing gain owing to the dispersion during stimulated Brillouin scattering (SBS) process. It is shown that the maximum buffer capacity varies with data bit rate and for continuous wave (CW) or quasi-CW pump it is 0.53 and 1.04 bit for RZ and NRZ respectively. Also, the optimum data bit rate to achieve the best storage capacity is obtained.
Slow light technology will play a key role in future all-optical communication. The slow-light technology based on stimulated Brillouin scattering has become a research highlight because of its additional advantages, such as compatibility of the devices with existing telecommunication systems, room-temperature operation, and tunable at arbitrary wavelengths. According to the propagation of a cw pulse through a Brillouin fiber amplifier, whose frequency is near the Stokes resonance, via three-wave coupling equations, both pump depletion and fiber losses taken into consideration, the principle of how slow-light effect based on stimulated Brillouin scattering produced and the mathematical expression of time delay are strictly deduced. A delay of 8 ns is obtained when the input Stokes pulse is 200ns and the SBS (stimulated Brillouin scattering) gain G is ~18 in our designed experiment of SBS slow-light system. Then the extent of transformation from pump waves to Stokes waves is measured using MATLAB numerical simulation according to the experiment dates, based on the relation between output pump light power and input pump light power and also the relation between output Stokes light power and input pump light power. And the relation between the input light power and propagation distance is discussed as well. Finally the relation between slow light pulse delay and SBS gain is also obtained.
Slow light is generated via the gain mechanisms of nonlinear optical phenomena-- stimulated stimulated Brillouin scattering in optical fiber. Slow light is characterized in terms of Brillouin threshold, gain spectrum, Brillouin frequency shift by using optical heterodyne detection. According to the measured Brillouin frequency shift, we set our signal frequency in the gain region by manual matching method to get the maximum gain, and the gain bandwidth is broadened to 450MHz using a phrase-modulated pump. A delay of 32ns is achieved for the 500ns input signal when the gain is 15dB.
Slow light is generated via the gain mechanisms of nonlinear optical phenomena-- stimulated stimulated Brillouin scattering in optical fiber. Slow light is characterized in terms of Brillouin threshold, gain spectrum, Brillouin frequency shift by using optical heterodyne detection. According to the measured Brillouin frequency shift, we set our signal frequency in the gain region by manual matching method to get the maximum gain, and the gain bandwidth is broadened to 450MHz using a phrase-modulated pump. A delay of 32ns is achieved for the 500ns input signal when the gain is 15dB.
All-optical tunable slow light technology has promising applications in all-optical network and optical information process. Tunable slow light based on stimulated Brillouin scattering is experimentally investigated, using highly nonlinear microstructured fiber which is designed and drawn by ourselves. The experiment setup is composed of single pump and a single-stage delay. When the pump power reaches 162.6 mW, a maximum delay of 76 ns, equal to 0.76 pulse width, is achieved in the highly nonlinear microstructured fiber of 120 m in length. In addition, by adjusting the pump power, the tunable slow light can be realized. This scheme of slow light has advantages such as large delay, being all-optical tunable and compatible with optical communications systems.
Dynamic control of the speed of a light signal, based on stimulated Brillouin scattering in optical fibers, was theoretically studied and also experimentally demonstrated as the core object of this thesis. To date, slow light based on stimulated Brillouin scattering has shown the unmatched flexibility to offer an efficient timing tool for the development of all-optical future router. Nevertheless, the seeming perfect Brillouin slow light suffered from three major obstacles: naturally narrow signal bandwidth, strong change of signal amplitude, and significant signal distortion. The essential contribution of this work has been mostly dedicated to resolve all those impairments so as to make Brillouin slow light a completely operating all-optical delay line for practical applications. Actually, high capability of tailoring the spectral distribution of the effective Brillouin resonance makes possible to resolve partially or completely all those problems. First of all, a broadband spectral window was passively obtained in between two Brillouin gain/loss resonances by simply appending two segments of fibers showing different Brillouin frequency shifts. The global Brillouin gain of the concatenated fibers manifests a gain/loss doublet resonance showing a broad window in between gain/loss peaks. In practice, this configuration has a crucial advantage that it removes the need of the pump modulation, generally used to create a polychromatic pump source. Therefore, a broadband Brillouin slow and fast light was simple realized with a reduced distortion. Secondly, the signal amplification or attenuation associated to the signal delay was completely compensated by superposing Brillouin gain and loss resonances with identical depth but different width. As a result, the Brillouin gain led to effectively a spectral hole in the center of the broadband absorption and opened a transparent window while the sharp change in the refractive index was preserve. This way it makes possible to realize zero-gain Brillouin slow light. This configuration was also exploited to produce Brillouin fast light with a total absence of signal loss, simply by swapping the spectral position of the two pumps. At last, a signal was continuously delayed through a Brillouin fiber delay line without any distortion. Due to the strong induced dispersion, pulse broadening is a major difficulty in all slow light systems and it is impossible to compensate such broadening using a linear system. Therefore, a conventional Brillouin slow light system was combined with a nonlinear optical fiber loop mirror that gives a nonlinear quadratic transmission. Using this configuration, the inevitable pulse broadening was completely compensated at the output of the loop and a signal was delayed up to one symbol without any distortion. Brillouin slow light systems were further studied in the spectral domain. For a given Brillouin resonance the spectrum of a light pulse was optimized to better match the Brillouin bandwidth. When the time envelope of a pulse was properly shaped, it was clearly observed that the spectral width of the pulse became minimized while preserving the pulse duration. This way the maximum time delay through Brillouin slow light could be enhanced for a fixed pulse width. Brillouin fast light was even realized in total absence of any pump source, which is a plain requirement for the generation of Brillouin slow or fast light. This self-generated delay line, key contribution of this thesis, relies on both spontaneous and stimulated Brillouin scattering in optical fibers. In this implementation, a light signal was strongly boosted above the so-called Brillouin threshold, so that most power of the signal was transferred to a backward propagating wave, namely the generation of amplified spontaneous Stokes wave. Since the center frequency of the intense Stokes wave is below the signal frequency by exactly Brillouin shift of the fiber used, this wave led to a Brillouin loss band centered at the signal frequency. Consequently, the signal experienced fast light propagation and the propagation velocity of the signal was self-controlled, simply by varying the signal input power. This technique has many practical advantages such as its high simplicity of the configuration and an invariant signal power in the output of this delay line. Additionally, this system self-adapts the signal bandwidth as the spectrum of the amplified Stokes wave matches the spectral distribution of the signal. An alternative method to generate all-optical delay line was proposed instead of slow light. This scheme makes use of the combination of wavelength conversion and group velocity dispersion. This type of delay line was mainly aimed at improving the storage capability of delaying element. The wavelength of a signal was simply and efficiently converted at a desired wavelength using cross gain modulation in semiconductor optical amplifiers. Then the converted signal was delivered to a high dispersive medium and arrived at the end of the medium with relative time delay due to the group velocity dispersion. A fractional delay of 140 was continuously produced through this delay line for a signal with a duration of 100 ps, preserving signal bandwidth and wavelength. The effect of slow light on linear interactions between light and matter was experimentally investigated to clarify the current scientific argument regarding slow light-enhanced Beer-Lambert absorption. It was predicted that real slowing of the light group velocity could enhance the molecular linear absorptions so as to improve the sensitivity of this type of sensing. However, the experimental results unambiguously show that material slow light (slow light in traveling wave media) does not enhance the Beer-Lambert absorption.