Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

Slow light based on stimulated Brillouin scattering in microstructured fiber

Wei Wei, Xia Zhang, Hui Yu, Li Yu-Peng, Zhang Yang-An, Huang Yong-qing, Wei Chen, Wenyong Luo, Ren Xiao-Min

Published Jan 1, 2013• 5 citations
Publisher

Abstract

All-optical tunable slow light technology has promising applications in all-optical network and optical information process. Tunable slow light based on stimulated Brillouin scattering is experimentally investigated, using highly nonlinear microstructured fiber which is designed and drawn by ourselves. The experiment setup is composed of single pump and a single-stage delay. When the pump power reaches 162.6 mW, a maximum delay of 76 ns, equal to 0.76 pulse width, is achieved in the highly nonlinear microstructured fiber of 120 m in length. In addition, by adjusting the pump power, the tunable slow light can be realized. This scheme of slow light has advantages such as large delay, being all-optical tunable and compatible with optical communications systems.

DOI
10.7498/aps.62.184208

Related papers

Theoretical analysis and experiment performance of slow-light based on stimulated Brillouin scattering (SBS)

Hongyan Zhou, Kun Hua Zhong, Ru Zhang +1 more

Slow light technology will play a key role in future all-optical communication. The slow-light technology based on stimulated Brillouin scattering has become a research highlight because of its additional advantages, such as compatibility of the devices with existing telecommunication systems, room-temperature operation, and tunable at arbitrary wavelengths. According to the propagation of a cw pulse through a Brillouin fiber amplifier, whose frequency is near the Stokes resonance, via three-wave coupling equations, both pump depletion and fiber losses taken into consideration, the principle of how slow-light effect based on stimulated Brillouin scattering produced and the mathematical expression of time delay are strictly deduced. A delay of 8 ns is obtained when the input Stokes pulse is 200ns and the SBS (stimulated Brillouin scattering) gain G is ~18 in our designed experiment of SBS slow-light system. Then the extent of transformation from pump waves to Stokes waves is measured using MATLAB numerical simulation according to the experiment dates, based on the relation between output pump light power and input pump light power and also the relation between output Stokes light power and input pump light power. And the relation between the input light power and propagation distance is discussed as well. Finally the relation between slow light pulse delay and SBS gain is also obtained.

Journal of Physics Conference Series•Feb 1, 2011•0 citations

Tunable All-Optical Delays via Brillouin Slow Light in an Optical Fiber

Yoshitomo Okawachi, Matthew S. Bigelow, Jay E. Sharping +5 more

We demonstrate a technique for generating tunable all-optical delays in room temperature single-mode optical fibers at telecommunication wavelengths using the stimulated Brillouin scattering process. This technique makes use of the rapid variation of the refractive index that occurs in the vicinity of the Brillouin gain feature. The wavelength at which the induced delay occurs is broadly tunable by controlling the wavelength of the laser pumping the process, and the magnitude of the delay can be tuned continuously by as much as 25 ns by adjusting the intensity of the pump field. The technique can be applied to pulses as short as 15 ns. This scheme represents an important first step towards implementing slow-light techniques for various applications including buffering in telecommunication systems.

Physical Review Letters•Apr 18, 2005•854 citations

Slow light with a swept-frequency source.

Zhang, R, Yunhui Zhu, Wang, J +1 more

ct: We introduce a new concept for stimulated-Brillouin-scattering-based slow light in optical fibers that is applicable for broadly-tunable frequency-swept sources. It allows slow light to be achieved, in principle, over the entire transparency window of the optical fiber. We demonstrate a slow light delay of 10 ns at 1.55 μm using a 10-m-long photonic crystal fiber with a source sweep rate of 400 MHz/μs and a pump power of 200 mW. We also show that there exists a maximal delay obtainable by this method, which is set by the SBS threshold, independent of sweep rate. For our fiber with optimum length, this maximum delay is ~38 ns, obtained for a pump power of 760 mW.

•Dec 20, 2010•7 citations

Slow light with a swept-frequency source

Rui Zhang, Yunhui Zhu, Jing Wang +1 more

ct: We introduce a new concept for stimulated-Brillouin-scattering-based slow light in optical fibers that is applicable for broadly-tunable frequency-swept sources. It allows slow light to be achieved, in principle, over the entire transparency window of the optical fiber. We demonstrate a slow light delay of 10 ns at 1.55 μm using a 10-m-long photonic crystal fiber with a source sweep rate of 400 MHz/μs and a pump power of 200 mW. We also show that there exists a maximal delay obtainable by this method, which is set by the SBS threshold, independent of sweep rate. For our fiber with optimum length, this maximum delay is ~38 ns, obtained for a pump power of 760 mW.

arXiv:1010.3179•Optics Express•Dec 10, 2010•6 citations

Tunable all-optical delays via Brillouin slow light in an optical fiber

Yoshitomo Okawachi, Jay E. Sharping, Alexander L. Gaeta +5 more

We have demonstrated that stimulated Brillouin scattering can be used to generate all-optical slow-light pulse delays of greater than a pulse length for pulses as short as 16 ns in a single-mode fiber. Since the induced delay is generated for wavelengths detuned from the pump field by the Brillouin frequency, tuning near an electronic resonance of the material is not required and thus delays can be induced at telecommunication wavelengths. This represents a significant improvement over previous demonstrations of slow light in solids and is an important step towards developing an all-optical tunable delay line for telecommunications. In addition, these results strongly suggest that analogous delays can be achieved using stimulated Raman scattering at telecommunication data rates.

Conference on Lasers and Electro-Optics•Jan 1, 2005•76 citations

A Review of Slow- and Fast-Light Based on Stimulated Brillouin Scattering in Future Optical Communication Networks

Ronny Henker, Andrzej Wiatrek, Kai-Uwe Lauterbach +4 more

Slow- and Fast-Light has been investigated during the last years as a powerful tool to reduce and increase the group velocity of light pulses by light. It has enjoyed much recent interest because of the practical applications for telecommunication and information systems. Among these are optical signal processing, radio frequency-photonics, nonlinear optics and time domain spectroscopy. Furthermore, it can be seen as a key technology for optical delay lines, buffers, equalizers and synchronizers in packet switched networks. For a realization, there are different methods and material systems possible. Among them the nonlinear effect of stimulated Brillouin scattering (SBS) is of special interest. This article gives an overview about the fundamentals and some experimental results of the Slow- and Fast-Light effect based on the SBS in optical fibers.

Communications - Scientific letters of the University of Zilina•Dec 31, 2008•3 citations
All-optical tunable slow light technology has promising applications in all-optical network and optical information process. Tunable slow light based on stimulated Brillouin scattering is experimentally investigated, using highly nonlinear microstructured fiber which is designed and drawn by ourselves. The experiment setup is composed of single pump and a single-stage delay. When the pump power reaches 162.6 mW, a maximum delay of 76 ns, equal to 0.76 pulse width, is achieved in the highly nonlinear microstructured fiber of 120 m in length. In addition, by adjusting the pump power, the tunable slow light can be realized. This scheme of slow light has advantages such as large delay, being all-optical tunable and compatible with optical communications systems.
Slow light technology will play a key role in future all-optical communication. The slow-light technology based on stimulated Brillouin scattering has become a research highlight because of its additional advantages, such as compatibility of the devices with existing telecommunication systems, room-temperature operation, and tunable at arbitrary wavelengths. According to the propagation of a cw pulse through a Brillouin fiber amplifier, whose frequency is near the Stokes resonance, via three-wave coupling equations, both pump depletion and fiber losses taken into consideration, the principle of how slow-light effect based on stimulated Brillouin scattering produced and the mathematical expression of time delay are strictly deduced. A delay of 8 ns is obtained when the input Stokes pulse is 200ns and the SBS (stimulated Brillouin scattering) gain G is ~18 in our designed experiment of SBS slow-light system. Then the extent of transformation from pump waves to Stokes waves is measured using MATLAB numerical simulation according to the experiment dates, based on the relation between output pump light power and input pump light power and also the relation between output Stokes light power and input pump light power. And the relation between the input light power and propagation distance is discussed as well. Finally the relation between slow light pulse delay and SBS gain is also obtained.
We demonstrate a technique for generating tunable all-optical delays in room temperature single-mode optical fibers at telecommunication wavelengths using the stimulated Brillouin scattering process. This technique makes use of the rapid variation of the refractive index that occurs in the vicinity of the Brillouin gain feature. The wavelength at which the induced delay occurs is broadly tunable by controlling the wavelength of the laser pumping the process, and the magnitude of the delay can be tuned continuously by as much as 25 ns by adjusting the intensity of the pump field. The technique can be applied to pulses as short as 15 ns. This scheme represents an important first step towards implementing slow-light techniques for various applications including buffering in telecommunication systems.
ct: We introduce a new concept for stimulated-Brillouin-scattering-based slow light in optical fibers that is applicable for broadly-tunable frequency-swept sources. It allows slow light to be achieved, in principle, over the entire transparency window of the optical fiber. We demonstrate a slow light delay of 10 ns at 1.55 μm using a 10-m-long photonic crystal fiber with a source sweep rate of 400 MHz/μs and a pump power of 200 mW. We also show that there exists a maximal delay obtainable by this method, which is set by the SBS threshold, independent of sweep rate. For our fiber with optimum length, this maximum delay is ~38 ns, obtained for a pump power of 760 mW.
ct: We introduce a new concept for stimulated-Brillouin-scattering-based slow light in optical fibers that is applicable for broadly-tunable frequency-swept sources. It allows slow light to be achieved, in principle, over the entire transparency window of the optical fiber. We demonstrate a slow light delay of 10 ns at 1.55 μm using a 10-m-long photonic crystal fiber with a source sweep rate of 400 MHz/μs and a pump power of 200 mW. We also show that there exists a maximal delay obtainable by this method, which is set by the SBS threshold, independent of sweep rate. For our fiber with optimum length, this maximum delay is ~38 ns, obtained for a pump power of 760 mW.
We have demonstrated that stimulated Brillouin scattering can be used to generate all-optical slow-light pulse delays of greater than a pulse length for pulses as short as 16 ns in a single-mode fiber. Since the induced delay is generated for wavelengths detuned from the pump field by the Brillouin frequency, tuning near an electronic resonance of the material is not required and thus delays can be induced at telecommunication wavelengths. This represents a significant improvement over previous demonstrations of slow light in solids and is an important step towards developing an all-optical tunable delay line for telecommunications. In addition, these results strongly suggest that analogous delays can be achieved using stimulated Raman scattering at telecommunication data rates.
Slow- and Fast-Light has been investigated during the last years as a powerful tool to reduce and increase the group velocity of light pulses by light. It has enjoyed much recent interest because of the practical applications for telecommunication and information systems. Among these are optical signal processing, radio frequency-photonics, nonlinear optics and time domain spectroscopy. Furthermore, it can be seen as a key technology for optical delay lines, buffers, equalizers and synchronizers in packet switched networks. For a realization, there are different methods and material systems possible. Among them the nonlinear effect of stimulated Brillouin scattering (SBS) is of special interest. This article gives an overview about the fundamentals and some experimental results of the Slow- and Fast-Light effect based on the SBS in optical fibers.