Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Dual-channel, single-photon upconversion detector at 13 μm

Jason S. Pelc, Paulina S. Kuo, Oliver Slattery, Lijun Ma, Xiao Hong Tang, M. M. Fejer

Published Aug 3, 2012• 25 citations
Publisher

Abstract

We demonstrate a two-channel, upconversion detector for counting 1300-nm-wavelength photons. By using two pumps near 1550 nm, photons near 1300 nm are converted to two spectrally distinct channels near 710 nm using sum-frequency generation (SFG) in a periodically poled LiNbO3 (PPLN) waveguide. We used spectral-conversion engineering to design the phase-modulated PPLN waveguide for simultaneous quasi-phasematching of two SFG processes. The two channels exhibit 31% and 25% full-system photon detection efficiency, and very low dark count rates (650 and 550 counts per second at a peak external conversion efficiency of 70%) through filtering using a volume Bragg grating. We investigate applications of the dual-channel upconversion detector as a frequency-shifting beamsplitter, and as a time-to-frequency converter to enable higher-data-rate quantum communications.

DOI
10.1364/oe.20.019075

Related papers

Upconversion detection near 2 μm at the single photon level

Guo-Liang Shentu, Xiu-Xiu Xia, Qi-Chao Sun +4 more

We have demonstrated upconversion detection at the single photon level in the 2 μm spectral window using a pump wavelength near 1550 nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 μm single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.

Optics Letters•Nov 19, 2013•22 citations

Dual-channel, single-photon upconversion detector near 1300 nm

Paulina S. Kuo, Jason S. Pelc, Oliver Slattery +2 more

Upconversion of 1.3-micron photons and detection using silicon avalanche photodiodes (Si APDs) can produce high photon detection efficiencies (PDEs) with low dark count rates. We demonstrate a novel two-channel device based on a phase-modulated, periodically poled LiNbO3 waveguide that mixes 1302-nm signal photons with two pump beams at 1556 and 1571 nm. Both channels showed high PDEs with very low dark counts. Using wavelength- to time-division multiplexing in this dual-channel device, we produced clock rates that exceed the timing-jitter-limited rates of a system based on one Si APD. Higher clock rates are of interest for improved quantum communication systems.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 15, 2012•3 citations

Upconversion single photon detection near 2 um

Guo-Liang Shentu, Xiu-Xiu Xia, Qi-Chao Sun +4 more

We have demonstrated upconversion detection at the single photon level in the 2 um spectral window using a pump wavelength near 1550nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 um single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.

arXiv:1310.7422•Oct 28, 2013•1 citation

Efficient and low-noise single-photon detection in 1550 nm communication band by frequency upconversion in periodically poled LiNbO_3 waveguides

Hidehiko Kamada, Masaki Asobe, Toshimori Honjo +5 more

We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).

Optics Letters•Mar 18, 2008•50 citations

Long-wavelength-pumped upconversion single-photon detector at 1550 nm: performance and noise analysis

Jason S. Pelc, Long Ma, Christopher R. Phillips +5 more

We demonstrate upconversion-assisted single-photon detection for the 1.55-μm telecommunications band based on a periodically poled lithium niobate (PPLN) waveguide pumped by a monolithic PPLN optical parametric oscillator. We achieve an internal conversion efficiency of 86%, which results in an overall system detection efficiency of 37%, with excess noise as low as 10(3) counts s(-1). We measure the dark count rate versus the upconversion pump-signal frequency separation and find the results to be consistent with noise photon generation by spontaneous anti-Stokes Raman scattering. These results enable detailed design guidelines for the development of low-noise quantum frequency conversion systems, which will be an important component of fiber-optic quantum networks.

Optics Express•Oct 17, 2011•242 citations

Reducing noise in single-photon-level frequency conversion

Paulina S. Kuo, Jason S. Pelc, Oliver Slattery +3 more

We demonstrate low-noise and efficient frequency conversion by sum-frequency mixing in a periodically poled LiNbO(3) (PPLN) waveguide. Using a 1556 nm pump, 1302 nm photons are efficiently converted to 709 nm photons. We obtain 70% conversion efficiency in the PPLN waveguide and >50% external conversion efficiency with 600 noise counts per second at peak conversion with continuous-wave pumping. We simultaneously achieve low noise and high conversion efficiency by careful spectral filtering. We discuss the impact of low-noise frequency translation on single-photon upconversion detection and quantum information applications.

Optics Letters•Apr 9, 2013•63 citations
We demonstrate a two-channel, upconversion detector for counting 1300-nm-wavelength photons. By using two pumps near 1550 nm, photons near 1300 nm are converted to two spectrally distinct channels near 710 nm using sum-frequency generation (SFG) in a periodically poled LiNbO3 (PPLN) waveguide. We used spectral-conversion engineering to design the phase-modulated PPLN waveguide for simultaneous quasi-phasematching of two SFG processes. The two channels exhibit 31% and 25% full-system photon detection efficiency, and very low dark count rates (650 and 550 counts per second at a peak external conversion efficiency of 70%) through filtering using a volume Bragg grating. We investigate applications of the dual-channel upconversion detector as a frequency-shifting beamsplitter, and as a time-to-frequency converter to enable higher-data-rate quantum communications.
We have demonstrated upconversion detection at the single photon level in the 2 μm spectral window using a pump wavelength near 1550 nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 μm single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.
Upconversion of 1.3-micron photons and detection using silicon avalanche photodiodes (Si APDs) can produce high photon detection efficiencies (PDEs) with low dark count rates. We demonstrate a novel two-channel device based on a phase-modulated, periodically poled LiNbO3 waveguide that mixes 1302-nm signal photons with two pump beams at 1556 and 1571 nm. Both channels showed high PDEs with very low dark counts. Using wavelength- to time-division multiplexing in this dual-channel device, we produced clock rates that exceed the timing-jitter-limited rates of a system based on one Si APD. Higher clock rates are of interest for improved quantum communication systems.
We have demonstrated upconversion detection at the single photon level in the 2 um spectral window using a pump wavelength near 1550nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 um single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.
We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).
We demonstrate upconversion-assisted single-photon detection for the 1.55-μm telecommunications band based on a periodically poled lithium niobate (PPLN) waveguide pumped by a monolithic PPLN optical parametric oscillator. We achieve an internal conversion efficiency of 86%, which results in an overall system detection efficiency of 37%, with excess noise as low as 10(3) counts s(-1). We measure the dark count rate versus the upconversion pump-signal frequency separation and find the results to be consistent with noise photon generation by spontaneous anti-Stokes Raman scattering. These results enable detailed design guidelines for the development of low-noise quantum frequency conversion systems, which will be an important component of fiber-optic quantum networks.
We demonstrate low-noise and efficient frequency conversion by sum-frequency mixing in a periodically poled LiNbO(3) (PPLN) waveguide. Using a 1556 nm pump, 1302 nm photons are efficiently converted to 709 nm photons. We obtain 70% conversion efficiency in the PPLN waveguide and >50% external conversion efficiency with 600 noise counts per second at peak conversion with continuous-wave pumping. We simultaneously achieve low noise and high conversion efficiency by careful spectral filtering. We discuss the impact of low-noise frequency translation on single-photon upconversion detection and quantum information applications.