Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Design and test of asynchronous eSFQ circuits

I. V. Vernik, Steven B. Kaplan, Mark H. Volkmann, Andriy V. Dotsenko, Coenrad Johann Fourie, Oleg A. Mukhanov

Published Mar 18, 2014• 23 citations
Publisher

Abstract

We designed and tested new energy-efficient single flux quantum (eSFQ) circuits. The eSFQ design approach is based on biasing logic gates via decision-making pairs (DMPs) which connect clock lines to synchronous gates. The eSFQ design of asynchronous gates is more challenging, since these gates are not clocked. We demonstrate eSFQ designs of asynchronous circuits and implemented two versions of eSFQ toggle flip-flops (eTFF) cells embedded in a synchronous shift register environment. The first design is based on the bias-free version of a TFF operating in the ballistic mode. In the second design, the TFFs dc bias is applied symmetrically, while the necessary half-quantum phase skew is achieved by magnetic flux bias, which can also be done with a pi-junction phase shifter. Surrounding shift registers are the eSFQ versions of the RSFQ shift register with two junctions per bit. In this work, we report the functional operation of these eSFQ circuits and their energy consumption.

DOI
10.1088/0953-2048/27/4/044030

Related papers

Implementation of energy efficient single flux quantum digital circuits with sub-aJ/bit operation

Mark H. Volkmann, Anubhav Sahu, Coenrad Johann Fourie +1 more

We report the first experimental demonstration of recently proposed energy efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic, eliminating the dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ∼0.8 aJ/bit operation. Two types of demonstration eSFQ circuit, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA cm −2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.

arXiv:1209.6383•Superconductor Science and Technology•Nov 8, 2012•154 citations

Experimental Investigation of Energy-Efficient Digital Circuits Based on eSFQ Logic

Mark H. Volkmann, Anubhav Sahu, Coenrad Johann Fourie +1 more

We present the design and results of experimental verification methods for ultra-low-power digital circuits based on the recently introduced energy-efficient single flux quantum (eSFQ) logic. Similar to another low-power SFQ logic, ERSFQ, eSFQ circuits make use of superconducting dc bias current dividers and thus avoid static power dissipation. As a result, per-gate power dissipation is reduced by two orders of magnitude as compared to conventional rapid single flux quantum and static power dissipation is zero. The eSFQ circuits are fabricated using the HYPRES standard 4.5 kA/cm2process. We integrate a low-pass analog-to-digital modulator with our eSFQ deserializer to enable testing at high speed. In this paper, we demonstrate the viability and performance metrics of eSFQ circuits through functional and high-speed tests. Specifically, we confirmed correct operation and present measured parameter margins.

IEEE Transactions on Applied Superconductivity•Jan 16, 2013•30 citations

Wave-Pipelined eSFQ Circuits

Mark H. Volkmann, I. V. Vernik, Oleg A. Mukhanov

We have designed and tested energy-efficient single flux quantum (eSFQ) circuits suitable for wave-pipelined architectures. The high energy-efficiency of eSFQ circuits combined with the sequential nature of SFQ logic makes eSFQ especially suitable for energy-efficient variants of highly-pipelined circuits such as modern arithmetic logic units (ALUs), without penalty to the clock speeds available to RSFQ logic. In previous work, we have demonstrated working eSFQ circuits in the form of shift registers, deserializers, counters. Here we expand on this work by introducing a means of moving data through eSFQ circuits without the need for buffering at every step, resembling the wave-pipelined architecture characterizing many large modern logic circuits. Specifically, we present a pipeline-friendly JTL, confluence buffer, and half adder, comprising the core components of many adder architectures. We also show how such an eSFQ full adder naturally lends itself to utilization in a computation pipeline. We report experimental demonstration of circuits manufactured in Hypres's 4.5 kA/cm2process.

IEEE Transactions on Applied Superconductivity•Dec 9, 2014•19 citations

Single flux, quantum B flip-flop and its possible applications

Stanislav V. Polonsky, Vasili K. Semenov, Alex F. Kirichenko

We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1994•75 citations

Operation of practical eSFQ circuits

Mark H. Volkmann, Anubhav Sahu, Andriy V. Dotsenko +1 more

We have designed and tested energy-efficient single flux quantum (eSFQ) circuits for use in practical circuits. The first circuit is a 184-bit shift register for acquisition memory to store short transient events. The second circuit is a 16-bit deserializer integrated with an analog-to-digital converter modulator. The deserializer converts a high speed oversampling delta modulator 1-bit data stream into 16 parallel digital outputs at 1/16 of input data rate. In this work, we report preliminary functional and high-speed operation of some of these eSFQ circuits including their margins of operation at different clock speeds, maximum operation frequencies, and power dissipation.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•6 citations

Simulation Analysis and Energy-Saving Techniques for ERSFQ Circuits

Naveen Kumar Katam, Oleg A. Mukhanov, Massoud Pedram

Energy-efficient rapid single flux quantum (ERSFQ) circuits have become a viable alternative for the implementation of superconducting circuits due to a large amount of static power consumption in RSFQ circuits. ERSFQ circuits are built upon the popular RSFQ logic circuits by replacing the power-dissipating resistor bias network with a bias network consisting of active devices. In this paper, a simulation study of ERSFQ biasing scheme is carried out by building simulation test benches for both synchronous and asynchronous ERSFQ circuits. A study is carried out to present the optimum value of biasing inductance, influence of the feeding Josephson transmission line (FJTL) and the effect of its size, the effect of the feeding clock frequency, and the effect of the circuit operating frequency. An innovative clock-choking mechanism using magnetic Josephson junctions is also proposed for the FJTL in the case of no logic circuit activity for a current-recycling circuit block, which would help in eliminating the dynamic power consumed due to the switching of bias junctions in a logic circuit. Simulation results for current recycling ERSFQ circuits are presented along with a strategy for implementing large superconducting circuits.

IEEE Transactions on Applied Superconductivity•Mar 18, 2019•23 citations
We designed and tested new energy-efficient single flux quantum (eSFQ) circuits. The eSFQ design approach is based on biasing logic gates via decision-making pairs (DMPs) which connect clock lines to synchronous gates. The eSFQ design of asynchronous gates is more challenging, since these gates are not clocked. We demonstrate eSFQ designs of asynchronous circuits and implemented two versions of eSFQ toggle flip-flops (eTFF) cells embedded in a synchronous shift register environment. The first design is based on the bias-free version of a TFF operating in the ballistic mode. In the second design, the TFFs dc bias is applied symmetrically, while the necessary half-quantum phase skew is achieved by magnetic flux bias, which can also be done with a pi-junction phase shifter. Surrounding shift registers are the eSFQ versions of the RSFQ shift register with two junctions per bit. In this work, we report the functional operation of these eSFQ circuits and their energy consumption.
We report the first experimental demonstration of recently proposed energy efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic, eliminating the dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ∼0.8 aJ/bit operation. Two types of demonstration eSFQ circuit, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA cm −2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.
We present the design and results of experimental verification methods for ultra-low-power digital circuits based on the recently introduced energy-efficient single flux quantum (eSFQ) logic. Similar to another low-power SFQ logic, ERSFQ, eSFQ circuits make use of superconducting dc bias current dividers and thus avoid static power dissipation. As a result, per-gate power dissipation is reduced by two orders of magnitude as compared to conventional rapid single flux quantum and static power dissipation is zero. The eSFQ circuits are fabricated using the HYPRES standard 4.5 kA/cm2process. We integrate a low-pass analog-to-digital modulator with our eSFQ deserializer to enable testing at high speed. In this paper, we demonstrate the viability and performance metrics of eSFQ circuits through functional and high-speed tests. Specifically, we confirmed correct operation and present measured parameter margins.
We have designed and tested energy-efficient single flux quantum (eSFQ) circuits suitable for wave-pipelined architectures. The high energy-efficiency of eSFQ circuits combined with the sequential nature of SFQ logic makes eSFQ especially suitable for energy-efficient variants of highly-pipelined circuits such as modern arithmetic logic units (ALUs), without penalty to the clock speeds available to RSFQ logic. In previous work, we have demonstrated working eSFQ circuits in the form of shift registers, deserializers, counters. Here we expand on this work by introducing a means of moving data through eSFQ circuits without the need for buffering at every step, resembling the wave-pipelined architecture characterizing many large modern logic circuits. Specifically, we present a pipeline-friendly JTL, confluence buffer, and half adder, comprising the core components of many adder architectures. We also show how such an eSFQ full adder naturally lends itself to utilization in a computation pipeline. We report experimental demonstration of circuits manufactured in Hypres's 4.5 kA/cm2process.
We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>
We have designed and tested energy-efficient single flux quantum (eSFQ) circuits for use in practical circuits. The first circuit is a 184-bit shift register for acquisition memory to store short transient events. The second circuit is a 16-bit deserializer integrated with an analog-to-digital converter modulator. The deserializer converts a high speed oversampling delta modulator 1-bit data stream into 16 parallel digital outputs at 1/16 of input data rate. In this work, we report preliminary functional and high-speed operation of some of these eSFQ circuits including their margins of operation at different clock speeds, maximum operation frequencies, and power dissipation.
Energy-efficient rapid single flux quantum (ERSFQ) circuits have become a viable alternative for the implementation of superconducting circuits due to a large amount of static power consumption in RSFQ circuits. ERSFQ circuits are built upon the popular RSFQ logic circuits by replacing the power-dissipating resistor bias network with a bias network consisting of active devices. In this paper, a simulation study of ERSFQ biasing scheme is carried out by building simulation test benches for both synchronous and asynchronous ERSFQ circuits. A study is carried out to present the optimum value of biasing inductance, influence of the feeding Josephson transmission line (FJTL) and the effect of its size, the effect of the feeding clock frequency, and the effect of the circuit operating frequency. An innovative clock-choking mechanism using magnetic Josephson junctions is also proposed for the FJTL in the case of no logic circuit activity for a current-recycling circuit block, which would help in eliminating the dynamic power consumed due to the switching of bias junctions in a logic circuit. Simulation results for current recycling ERSFQ circuits are presented along with a strategy for implementing large superconducting circuits.