Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Communications

Cold atomic beam from a two-dimensional magneto-optical trap with two-color pushing laser beams

Sung Jong Park, Jiho Noh, Jongchul Mun

Published Jun 4, 2012• 25 citations
Publisher
DOI
10.1016/j.optcom.2012.05.041

Related papers

Intense source of cold cesium atoms based on a two-dimensional magneto–optical trap with independent axial cooling and pushing

黄家强, 颜学术, 吴晨菲 +2 more

We report our studies on an intense source of cold cesium atoms based on a two-dimensional(2D) magneto–optical trap(MOT) with independent axial cooling and pushing.The new-designed source,proposed as 2D-HP MOT,uses hollow laser beams for axial cooling and a thin pushing laser beam to extract a cold atomic beam.With the independent pushing beam,the atomic flux can be substantially optimized.The total atomic flux maximum obtained in the 2D-HP MOT is4.02 × 1010atoms/s,increased by 60 percent compared to the traditional 2D+MOT in our experiment.Moreover,with the pushing power 10 μW and detuning 0Γ,the 2D-HP MOT can generate a rather intense atomic beam with the concomitant light shift suppressed by a factor of 20.The axial velocity distribution of the cold cesium beams centers at 6.8 m/s with an FMHW of about 2.8 m/s.The dependences of the atomic flux on the pushing power and detuning are studied in detail.The experimental results are in good agreement with the theoretical model.

中国物理B：英文版•Jan 1, 2016•0 citations

A continuous cold atomic beam from a magneto-optical trap

L. Cacciapuoti, A. Castrillo, Marella de Angelis +1 more

The European Physical Journal D•Aug 1, 2001•18 citations

Efficient Loading of an Yb MOT on the 1S0 → 1P1 Transition

Zhufang Zhao, Shunxiang Wang, Jun Jian +5 more

We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.

Photonics•Oct 28, 2025•1 citation

A continuous cold atomic beam from a magneto-optical trap

Cacciapuoti L., M. G. CUSELLA DE ANGELIS, Guglielmo Maria Tino +1 more

•Jan 1, 2001•0 citations

A cold cesium beam source based on a two-dimensional magneto-optical trap

Weibin Xie, Qing Wang, Xuan He +4 more

A beam source is proposed for the production of an intense cold cesium atomic beam that can be used in cesium beam atomic clocks. The source is based on a two-dimensional magneto-optical trap (2D-MOT), but introduces hollow cooling and pushing lights in the axial direction to create a 2D+-MOT, which separates the cooling and pushing functions while the low-power pushing light pushes atoms out to form a cold atomic beam. This cold cesium atomic beam source reduces the light shift due to leakage light and retains longitudinal cooling to increase the flux of the cold atomic beam compared with that of the conventional 2D+-MOT scheme. The specifics of the design are investigated, the atomic velocity and beam flux are calculated, and the results are experimentally verified. The results demonstrate that when the power of the pushing light is 180 µW and when its frequency resonates with the 4 → 5′ transition of the Cs D2 line, the most probable longitudinal velocity of the outgoing cold atomic beam, the width of velocity distribution, and the atomic beam flux are 19.38 m/s, 8.1 m/s, and 1.7 × 1010 atoms/s, respectively.

AIP Advances•Jul 1, 2022•4 citations

Guided and focused slow atomic beam from a 2 dimensional magneto optical trap

Yoann Bruneau, G. Khalili, P. Pillet +1 more

The European Physical Journal D•Apr 1, 2014•8 citations
We report our studies on an intense source of cold cesium atoms based on a two-dimensional(2D) magneto–optical trap(MOT) with independent axial cooling and pushing.The new-designed source,proposed as 2D-HP MOT,uses hollow laser beams for axial cooling and a thin pushing laser beam to extract a cold atomic beam.With the independent pushing beam,the atomic flux can be substantially optimized.The total atomic flux maximum obtained in the 2D-HP MOT is4.02 × 1010atoms/s,increased by 60 percent compared to the traditional 2D+MOT in our experiment.Moreover,with the pushing power 10 μW and detuning 0Γ,the 2D-HP MOT can generate a rather intense atomic beam with the concomitant light shift suppressed by a factor of 20.The axial velocity distribution of the cold cesium beams centers at 6.8 m/s with an FMHW of about 2.8 m/s.The dependences of the atomic flux on the pushing power and detuning are studied in detail.The experimental results are in good agreement with the theoretical model.
We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.
A beam source is proposed for the production of an intense cold cesium atomic beam that can be used in cesium beam atomic clocks. The source is based on a two-dimensional magneto-optical trap (2D-MOT), but introduces hollow cooling and pushing lights in the axial direction to create a 2D+-MOT, which separates the cooling and pushing functions while the low-power pushing light pushes atoms out to form a cold atomic beam. This cold cesium atomic beam source reduces the light shift due to leakage light and retains longitudinal cooling to increase the flux of the cold atomic beam compared with that of the conventional 2D+-MOT scheme. The specifics of the design are investigated, the atomic velocity and beam flux are calculated, and the results are experimentally verified. The results demonstrate that when the power of the pushing light is 180 µW and when its frequency resonates with the 4 → 5′ transition of the Cs D2 line, the most probable longitudinal velocity of the outgoing cold atomic beam, the width of velocity distribution, and the atomic beam flux are 19.38 m/s, 8.1 m/s, and 1.7 × 1010 atoms/s, respectively.