Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Photonics

Efficient Loading of an Yb MOT on the 1S0 → 1P1 Transition

Zhufang Zhao, Shunxiang Wang, Jun Jian, Quanxin Zhang, Wenliang Liu, Jizhou Wu, Yuqing Li, Jie Ma

Published Oct 28, 2025• 1 citation
Publisher

Abstract

We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.

DOI
10.3390/photonics12111064

Related papers

Loading of a large Yb MOT on the 1 S 0 → 1 P 1 transition

Hector Letellier, Álvaro Mitchell Galvão de Melo, A. Dorne +1 more

We present an experimental setup to laser cool and trap a large number of ytterbium atoms. Our design uses an oven with an array of micro-tubes for efficient collimation of the atomic beam, and we implement a magneto-optical trap of 174Yb on the 1S0 → 1P1 transition at 399 nm. Despite the absence of a Zeeman slower, we obtain a loading of 4 × 109 at./s. We trap up to N = 109 at., where light-assisted collisions become the dominant loss mechanism. We precisely characterize our atomic beam, the loading rate of the magneto-optical trap, and several loss mechanisms relevant for trapping a large number of atoms.

arXiv:2308.00387•Review of Scientific Instruments•Dec 1, 2023•12 citations

Direct loading of Yb atoms into a 3D magneto-optical trap from a dispenser atomic source

Junia Nomura, Tomohiko Momma, Yuki Kojima +4 more

The realization of cold atoms using a compact and low-power-consumption experimental setup is indispensable for cold atom experiments, including optical clocks and quantum simulations. We demonstrate the direct loading of Yb atoms into a 3D magneto-optical trap (MOT) from a dispenser atomic source without using a Zeeman slower. The power consumption of the dispenser was ∼3 W. Spectroscopy of the atomic beam from the dispenser on the 6s2 1S0–6s6p 1P1 Yb transition at 399 nm shows that the flux of the atomic beam reaches 1.4 × 1013 s−1 cm−2. We can load up to 4.1 × 107 atoms into the MOT with slowing and trapping laser powers of 20.3 and 35.0 mW, respectively. The realized cold atom system is reliable and can be adapted for experiments on alkaline earth and other alkaline earth-like atoms.

AIP Advances•Feb 1, 2023•6 citations

Two-dimensional magneto-optical trap of dysprosium atoms as a compact source for efficient loading of a narrow-line three-dimensional magneto-optical trap

Shu‐Wei Jin, Jianshun Gao, Karthik Chandrashekara +3 more

We report on a scheme for loading dysprosium atoms into a narrow-line three-dimensional magneto-optical trap (3D MOT). Our approach replaces the conventional Zeeman slower with a two-dimensional (2D) MOT operating on the broad 421-nm line to create a high-flux beam of slow atoms. Even in the absence of a push beam, we demonstrate efficient loading of the 3D MOT, which operates on the narrower 626-nm intercombination line. Adding push beams working at either 421 nm or 626 nm, significant enhancement of the loading rate is achieved. We reach the best performance, with an enhancement factor of 3.6, using a push beam red-detuned to the 626-nm line. With loading rates greater than ${10}^{8}\phantom{\rule{0.16em}{0ex}}\text{atoms/s}$ achieved at a moderate oven reservoir temperature of ${800}^{\ensuremath{\circ}}\phantom{\rule{0.16em}{0ex}}\mathrm{C}$, our method offers similar or greater performance than Zeeman-slower-based systems. Our 2D-MOT-based approach constitutes a promising first step towards state-of-the-art quantum gas experiments with several advantages over the Zeeman-slower-based setup and is readily adaptable to other open-shell lanthanides.

arXiv:2303.05191•Physical Review A•Aug 18, 2023•16 citations

Loading of the narrow line Tm MOT from a pulsed cold atomic beam

M. O. Yaushev, D. Mishin, Dmitry O. Tregubov +2 more

We report on building a pulsed source of cold Tm atoms and loading of the narrow-line magneto-optical trap (MOT) from the cold atomic beam. We achieve the loading rate of the first-stage MOT in the primary chamber up to 108 atoms/s and obtain a cold atomic beam with the mean longitudinal velocity ∼10 m/s and an angular spread of 18 mrad in a pulsed mode. In this regime, we can form a cold atomic beam with up to 5 × 106 atoms at a 5 Hz repetition rate. We also introduce a novel method to enhance the capture velocity of the narrow-line MOT by incorporating an additional axial cooling beam and achieve loading efficiency η = 10% of the second-stage MOT in the science chamber. Our approach could be extended to other atomic species with similar properties, such as Sr, Yb, Dy, and Er, serving as a convenient alternative for the traditional 2D-MOT schemes. Providing rapid loading of the MOT in the science chamber, it would reduce preparation time of the atomic ensemble leading to a shorter dead time in spectroscopy experiments and a higher repetition rate.

arXiv:2411.08807•Review of Scientific Instruments•Mar 1, 2025•3 citations

Crossed-beam slowing to enhance narrow-line ytterbium magneto-optic traps

Benjamin Plotkin-Swing, Anna Wirth-Singh, Daniel Gochnauer +3 more

We demonstrate a method to enhance the atom loading rate of a ytterbium (Yb) magneto-optic trap (MOT) operating on the 556 nm 1S0 → 3P1 intercombination transition (narrow linewidth Γg = 2π × 182 kHz). Following traditional Zeeman slowing of an atomic beam near the 399 nm 1S0 → 1P1 transition (broad linewidth Γp = 2π × 29 MHz), two laser beams in a crossed-beam geometry, frequency tuned near the same transition, provide additional slowing immediately prior to the MOT. Using this technique, we observe an improvement by a factor of 6 in the atom loading rate of a narrow-line Yb MOT. The relative simplicity and generality of this approach make it readily adoptable to other experiments involving narrow-line MOTs. We also present a numerical simulation of this two-stage slowing process, which shows good agreement with the observed dependence on experimental parameters, and use it to assess potential improvements to the method.

arXiv:2004.10298•Review of Scientific Instruments•Sep 1, 2020•17 citations

Enhanced Atom Transport in an Ytterbium 2D-MOT with an Off-Axis Push Beam

Ailong TAO, Di Hu, Meifeng Ye +7 more

Abstract We present the first implementation of a slow ytterbium atomic beam source based on a compact two-dimensional magneto-optical trap (2D-MOT) for ytterbium optical clocks. Detailed experiment parameters are optimized through Monte Carlo (MC) simulations and experimentally validated by the loading behavior of the subsequent 3D-MOT. Specifically, theoretical modeling reveals significant asymmetry in atomic beam distribution across the differential pumping channel (DPC), indicating critical dependence of the pre-cooled efficiency on the pushing beam alignment. Numerical simulation shows that a deviation of approximately 5◦ between the pushing beam and the normal incidence axis can effectively mitigate the distribution asymmetry and then enhance the 3D-MOT capture efficiency. Experimental results demonstrate a maximum 3D-MOT loading rate of 1.5×10 8 atoms/s with steady-state atom number exceeding 8×10 7 , fully demonstrating the feasibility of this scheme for ytterbium atoms. The system offers a compact design coupled with significantly reduced power consumption. These inherent features establish a robust platform for developing portable optical clocks and other field-deployable quantum technologies.

Chinese Physics B•Apr 17, 2026•0 citations
We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.
We present an experimental setup to laser cool and trap a large number of ytterbium atoms. Our design uses an oven with an array of micro-tubes for efficient collimation of the atomic beam, and we implement a magneto-optical trap of 174Yb on the 1S0 → 1P1 transition at 399 nm. Despite the absence of a Zeeman slower, we obtain a loading of 4 × 109 at./s. We trap up to N = 109 at., where light-assisted collisions become the dominant loss mechanism. We precisely characterize our atomic beam, the loading rate of the magneto-optical trap, and several loss mechanisms relevant for trapping a large number of atoms.
The realization of cold atoms using a compact and low-power-consumption experimental setup is indispensable for cold atom experiments, including optical clocks and quantum simulations. We demonstrate the direct loading of Yb atoms into a 3D magneto-optical trap (MOT) from a dispenser atomic source without using a Zeeman slower. The power consumption of the dispenser was ∼3 W. Spectroscopy of the atomic beam from the dispenser on the 6s2 1S0–6s6p 1P1 Yb transition at 399 nm shows that the flux of the atomic beam reaches 1.4 × 1013 s−1 cm−2. We can load up to 4.1 × 107 atoms into the MOT with slowing and trapping laser powers of 20.3 and 35.0 mW, respectively. The realized cold atom system is reliable and can be adapted for experiments on alkaline earth and other alkaline earth-like atoms.
We report on a scheme for loading dysprosium atoms into a narrow-line three-dimensional magneto-optical trap (3D MOT). Our approach replaces the conventional Zeeman slower with a two-dimensional (2D) MOT operating on the broad 421-nm line to create a high-flux beam of slow atoms. Even in the absence of a push beam, we demonstrate efficient loading of the 3D MOT, which operates on the narrower 626-nm intercombination line. Adding push beams working at either 421 nm or 626 nm, significant enhancement of the loading rate is achieved. We reach the best performance, with an enhancement factor of 3.6, using a push beam red-detuned to the 626-nm line. With loading rates greater than 108atoms/s{10}^{8}\phantom{\rule{0.16em}{0ex}}\text{atoms/s}108atoms/s achieved at a moderate oven reservoir temperature of ${800}^{\ensuremath{\circ}}\phantom{\rule{0.16em}{0ex}}\mathrm{C}$, our method offers similar or greater performance than Zeeman-slower-based systems. Our 2D-MOT-based approach constitutes a promising first step towards state-of-the-art quantum gas experiments with several advantages over the Zeeman-slower-based setup and is readily adaptable to other open-shell lanthanides.
We report on building a pulsed source of cold Tm atoms and loading of the narrow-line magneto-optical trap (MOT) from the cold atomic beam. We achieve the loading rate of the first-stage MOT in the primary chamber up to 108 atoms/s and obtain a cold atomic beam with the mean longitudinal velocity ∼10 m/s and an angular spread of 18 mrad in a pulsed mode. In this regime, we can form a cold atomic beam with up to 5 × 106 atoms at a 5 Hz repetition rate. We also introduce a novel method to enhance the capture velocity of the narrow-line MOT by incorporating an additional axial cooling beam and achieve loading efficiency η = 10% of the second-stage MOT in the science chamber. Our approach could be extended to other atomic species with similar properties, such as Sr, Yb, Dy, and Er, serving as a convenient alternative for the traditional 2D-MOT schemes. Providing rapid loading of the MOT in the science chamber, it would reduce preparation time of the atomic ensemble leading to a shorter dead time in spectroscopy experiments and a higher repetition rate.
We demonstrate a method to enhance the atom loading rate of a ytterbium (Yb) magneto-optic trap (MOT) operating on the 556 nm 1S0 → 3P1 intercombination transition (narrow linewidth Γg = 2π × 182 kHz). Following traditional Zeeman slowing of an atomic beam near the 399 nm 1S0 → 1P1 transition (broad linewidth Γp = 2π × 29 MHz), two laser beams in a crossed-beam geometry, frequency tuned near the same transition, provide additional slowing immediately prior to the MOT. Using this technique, we observe an improvement by a factor of 6 in the atom loading rate of a narrow-line Yb MOT. The relative simplicity and generality of this approach make it readily adoptable to other experiments involving narrow-line MOTs. We also present a numerical simulation of this two-stage slowing process, which shows good agreement with the observed dependence on experimental parameters, and use it to assess potential improvements to the method.
Abstract We present the first implementation of a slow ytterbium atomic beam source based on a compact two-dimensional magneto-optical trap (2D-MOT) for ytterbium optical clocks. Detailed experiment parameters are optimized through Monte Carlo (MC) simulations and experimentally validated by the loading behavior of the subsequent 3D-MOT. Specifically, theoretical modeling reveals significant asymmetry in atomic beam distribution across the differential pumping channel (DPC), indicating critical dependence of the pre-cooled efficiency on the pushing beam alignment. Numerical simulation shows that a deviation of approximately 5◦ between the pushing beam and the normal incidence axis can effectively mitigate the distribution asymmetry and then enhance the 3D-MOT capture efficiency. Experimental results demonstrate a maximum 3D-MOT loading rate of 1.5×10 8 atoms/s with steady-state atom number exceeding 8×10 7 , fully demonstrating the feasibility of this scheme for ytterbium atoms. The system offers a compact design coupled with significantly reduced power consumption. These inherent features establish a robust platform for developing portable optical clocks and other field-deployable quantum technologies.