Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Controllable optical bistability in photonic-crystal one-atom laser

Xiaoyong Guo, Shuchen Lü

Published Oct 21, 2009• 18 citations
Publisher

Abstract

We investigate the property of optical bistability in a photonic-crystal one-atom laser when nonlinear microcavity is present. The physical system consists of a coherently driven two-level light emitter strongly coupled to a high-quality microcavity which is embedded within a photonic crystal and another coherent probing field which has incident into the microcavity. In our case, the microcavity is fabricated by nonlinear material and placed as an impurity in photonic crystal. This study reveals that such a system can exhibit optical bistability. The dependence of threshold value and hysteresis loop on the photonic band gap of the photonic crystal, driving field Rabi frequency and dephasing processes, are studied. Our results clearly illustrate the ability to control optical bistability through suitable photonic-crystal architectures and external coherent driving field, and this study suggests that in a photonic-crystal nonlinear microcavity, the one-atom laser acts as an effective controllable bistable device in the design of all-light digital computing systems in the near future.

DOI
10.1103/physreva.80.043826

Related papers

Optical bistability in one-dimensional doped photonic crystals with spontaneously generated coherence

Shahnaz Aas, Özgür Esat Müstecaplıoğlu

We investigate optical bistability in a multilayer one-dimensional photonic crystal where the central layer is doped with $\ensuremath{\Lambda}$-type three-level atoms. We take into account the influence of spontaneously generated coherence when the lower atomic levels are sufficiently close to each other, in which case Kerr-type nonlinear response of the atoms is enhanced. We calculate the propagation of a probe beam in the defect mode window using the numerical nonlinear transfer matrix method. We find that Rabi frequency of a control field acting on the defect layer and the detuning of the probe field from the atomic resonance can be used to control the size and contrast of the hysteresis loop and the threshold of the optical bistability. In particular we find that at the optimal spontaneously generated coherence, a three orders of magnitude lower threshold can be achieved relative to the case without the coherence.

arXiv:1309.0538•Physical Review A•Nov 26, 2013•16 citations

Optical bistability, amplification, and transparency in a one-dimensional photonic crystal with a nonlinear central layer

Samira Alipour, Siamak Khademi

In this paper, we investigate optical properties of a multilayer one-dimensional photonic crystal, where the central layer is doped with one of different kinds of three-level atomic systems, e.g., Vee, Λ, upper coupling ladder, and lower coupling ladder. Then, the control of optical bistability properties of the photonic crystal, by Rabi frequency of the coupling field, spontaneously generated coherence, and probe detuning, is studied. We discuss the advantages and disadvantages of different systems' optical properties. It is shown that the investigated photonic crystals have a bistability property as well as full transparency. Also, the photonic crystals show some amplification in transmission and even reflection of the probe field.

Applied Optics•Oct 26, 2018•3 citations

Characteristics of Optical Bistability of Nonlinear One-dimensional Photonic Crystal Waveguide

Ming Chen, Li Chun-Fei

We designed and manufactured an optical bistability waveguide device based on nonlinear one-dimensional photonic crystal used CdS_xSe_(1-x) doped glass. This kind of semiconductor doped glass has large nonlinear refractive index and nonlinear fast response time. The distribution of refractive index of the nonlinear one-dimensional photonic crystal waveguide satisfies sine function. We obtained the nonlinear photonic crystal waveguide by exposure holography and etching techniques. Length of the photonic crystal waveguide is about 3 mm. The height of the peak-groove of the waveguide is 0.1 μm. According to our design, the center of bandgap of the one-dimensional photonic crystal lies at 514.5 nm while the power density of the incident light, the incident light was reflected by the photonic crystal. When the power density of the incident light increasing, the bandgap is shifting to the direc-tion of short wavelength due to the decreasing of the refractive index with the increasing of the incident power density, so more incident light is transmitted. In experiment, we used an active mode-locking pulse of Ar ion laser as the light source which wavelength is 514.5 nm, repeating frequency is 82 MHz and pulse width is 200 ps. The light beam was coupled into the device by prism with a laser average power of 1.28 W (in the case of nonlinear saturation operation, optimum coupling efficiency is about 6%). Pulse wave forms of incident light and transmitted from sample were recorded in turn by 7 904 oscilloscope. The optical bistability curve of input power density and output one is fitted by computer. We obtained the threshold power density of bistable switch to be 1.60×10~5 W/cm~2 (it is equivalent to average power of 77 mW) and both the rise and fall time are 63 ps. We used the Finite Difference Time Domain Method to obtain the characteristics of the bandgap shift with the incident power density increasing of the nonlinear photonic crystal and calculate the optical bistability curve of this device. In theory, the threshold power density of bistable switch is about 1.40×10~5 W/cm~2 and the switch time is about 50 ps. The theoretical results agree well with the experimental ones. This device is a new and feasible one for optical information process and optical computing in the future.

Chinese Journal of Luminescence•Jan 1, 2004•0 citations

Coherent control of spontaneous emission near a photonic band edge

Mesfin Woldeyohannes, Sajeev John

We demonstrate the coherent control of spontaneous emission for a three-level atom located within a photonic band gap (PBG) material, with one resonant frequency near the edge of the PBG. Spontaneous emission from the three-level atom can be totally suppressed or strongly enhanced depending on the relative phase between the steady-state control laser coupling the two upper levels and the pump laser pulse used to create an excited state of the atom in the form of a coherent superposition of the two upper levels. Unlike the free-space case, the steady-state inversion of the atomic system is strongly dependent on the externally prescribed initial conditions. This non-zero steady-state population is achieved by virtue of the localization of light in the vicinity of the emitting atom. It is robust to decoherence effects provided that the Rabi frequency of the control laser field exceeds the rate of dephasing interactions. As a result, such a system may be relevant for a single-atom, phase-sensitive optical memory device on the atomic scale. The protected electric dipole within the PBG provides a basis for a qubit to encode information for quantum computations. A detailed literature survey on the nature, fabrication and applications of PBG materials is presented to provide context for this research.

Journal of Optics B Quantum and Semiclassical Optics•Feb 13, 2003•88 citations

Optical bistable behavior involving photonic crystals nonlinear cavity

K. F. Deng, Du Fang Shi

We present an analytical model and numerical experiments to describe optimal bistable switching involving photonic crystals nonlinear cavity. The involving photonic crystals nonlinear cavity is particularly suitable for large-scale all-optical integration. It is interesting to show that the refractive index of the system can be altered by the incident intensity when the incident frequency is tuned to the evanescent mode and the cavity contains a nonlinear Kerr medium. The response of this system to high-intensity incident waves is studied in detail. A cavity host a localized mode at 1.55 um with a Q of 4000 and a mode volume of 0.055 um3, we predict the onset of bistable reflection at incident powers of ~40 mW. The downstream reflections lead to hysteresis loops in the reflectivity that are topologically distinct from conventional Lorentzian-derived loops characteristic of isolated Fabry-Perot cavities. We provide a stability argument that reveals the unstable branches of these unique hysteresis loops, and we illustrate some of the rich bistable behaviors that can be engineered with such downstream sources, this fact may be used to obtain more flexibility in designing nonlinear devices.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 11, 2005•0 citations

OPTICAL BISTABILITY SWITCHING PROPERTY IN ONE-DIMENSIONAL NONLINEAR PHOTONIC CRYSTAL

Ming Chen, Chunfei Li, Shaojie Ma +3 more

Optical bistability device based on nonlinear one-dimensional photonic crystals is designed and manufactured. The device has 20 periods and is made from ZnS and ZnSe layers alternately. When the incident power density reach threshold power density 1.0 × 105 W/cm2, the Ar ion laser, whose wavelength is 514.5 nm, is shifted out of the optical band gap of the one-dimensional nonlinear photonic crystals, so an optical switch is made. It also can be made into an optical bistability device. The threshold power density of the optical bistability is 1.38 × 105 W/cm2 and its switching time is about 100 ps in experiment. The experimental results are in good accordance with the theoretical ones.

Journal of Nonlinear Optical Physics & Materials•Mar 1, 2005•3 citations
We investigate the property of optical bistability in a photonic-crystal one-atom laser when nonlinear microcavity is present. The physical system consists of a coherently driven two-level light emitter strongly coupled to a high-quality microcavity which is embedded within a photonic crystal and another coherent probing field which has incident into the microcavity. In our case, the microcavity is fabricated by nonlinear material and placed as an impurity in photonic crystal. This study reveals that such a system can exhibit optical bistability. The dependence of threshold value and hysteresis loop on the photonic band gap of the photonic crystal, driving field Rabi frequency and dephasing processes, are studied. Our results clearly illustrate the ability to control optical bistability through suitable photonic-crystal architectures and external coherent driving field, and this study suggests that in a photonic-crystal nonlinear microcavity, the one-atom laser acts as an effective controllable bistable device in the design of all-light digital computing systems in the near future.
We investigate optical bistability in a multilayer one-dimensional photonic crystal where the central layer is doped with $\ensuremath{\Lambda}$-type three-level atoms. We take into account the influence of spontaneously generated coherence when the lower atomic levels are sufficiently close to each other, in which case Kerr-type nonlinear response of the atoms is enhanced. We calculate the propagation of a probe beam in the defect mode window using the numerical nonlinear transfer matrix method. We find that Rabi frequency of a control field acting on the defect layer and the detuning of the probe field from the atomic resonance can be used to control the size and contrast of the hysteresis loop and the threshold of the optical bistability. In particular we find that at the optimal spontaneously generated coherence, a three orders of magnitude lower threshold can be achieved relative to the case without the coherence.
In this paper, we investigate optical properties of a multilayer one-dimensional photonic crystal, where the central layer is doped with one of different kinds of three-level atomic systems, e.g., Vee, Λ, upper coupling ladder, and lower coupling ladder. Then, the control of optical bistability properties of the photonic crystal, by Rabi frequency of the coupling field, spontaneously generated coherence, and probe detuning, is studied. We discuss the advantages and disadvantages of different systems' optical properties. It is shown that the investigated photonic crystals have a bistability property as well as full transparency. Also, the photonic crystals show some amplification in transmission and even reflection of the probe field.
We designed and manufactured an optical bistability waveguide device based on nonlinear one-dimensional photonic crystal used CdS_xSe_(1-x) doped glass. This kind of semiconductor doped glass has large nonlinear refractive index and nonlinear fast response time. The distribution of refractive index of the nonlinear one-dimensional photonic crystal waveguide satisfies sine function. We obtained the nonlinear photonic crystal waveguide by exposure holography and etching techniques. Length of the photonic crystal waveguide is about 3 mm. The height of the peak-groove of the waveguide is 0.1 μm. According to our design, the center of bandgap of the one-dimensional photonic crystal lies at 514.5 nm while the power density of the incident light, the incident light was reflected by the photonic crystal. When the power density of the incident light increasing, the bandgap is shifting to the direc-tion of short wavelength due to the decreasing of the refractive index with the increasing of the incident power density, so more incident light is transmitted. In experiment, we used an active mode-locking pulse of Ar ion laser as the light source which wavelength is 514.5 nm, repeating frequency is 82 MHz and pulse width is 200 ps. The light beam was coupled into the device by prism with a laser average power of 1.28 W (in the case of nonlinear saturation operation, optimum coupling efficiency is about 6%). Pulse wave forms of incident light and transmitted from sample were recorded in turn by 7 904 oscilloscope. The optical bistability curve of input power density and output one is fitted by computer. We obtained the threshold power density of bistable switch to be 1.60×10~5 W/cm~2 (it is equivalent to average power of 77 mW) and both the rise and fall time are 63 ps. We used the Finite Difference Time Domain Method to obtain the characteristics of the bandgap shift with the incident power density increasing of the nonlinear photonic crystal and calculate the optical bistability curve of this device. In theory, the threshold power density of bistable switch is about 1.40×10~5 W/cm~2 and the switch time is about 50 ps. The theoretical results agree well with the experimental ones. This device is a new and feasible one for optical information process and optical computing in the future.
We demonstrate the coherent control of spontaneous emission for a three-level atom located within a photonic band gap (PBG) material, with one resonant frequency near the edge of the PBG. Spontaneous emission from the three-level atom can be totally suppressed or strongly enhanced depending on the relative phase between the steady-state control laser coupling the two upper levels and the pump laser pulse used to create an excited state of the atom in the form of a coherent superposition of the two upper levels. Unlike the free-space case, the steady-state inversion of the atomic system is strongly dependent on the externally prescribed initial conditions. This non-zero steady-state population is achieved by virtue of the localization of light in the vicinity of the emitting atom. It is robust to decoherence effects provided that the Rabi frequency of the control laser field exceeds the rate of dephasing interactions. As a result, such a system may be relevant for a single-atom, phase-sensitive optical memory device on the atomic scale. The protected electric dipole within the PBG provides a basis for a qubit to encode information for quantum computations. A detailed literature survey on the nature, fabrication and applications of PBG materials is presented to provide context for this research.
We present an analytical model and numerical experiments to describe optimal bistable switching involving photonic crystals nonlinear cavity. The involving photonic crystals nonlinear cavity is particularly suitable for large-scale all-optical integration. It is interesting to show that the refractive index of the system can be altered by the incident intensity when the incident frequency is tuned to the evanescent mode and the cavity contains a nonlinear Kerr medium. The response of this system to high-intensity incident waves is studied in detail. A cavity host a localized mode at 1.55 um with a Q of 4000 and a mode volume of 0.055 um3, we predict the onset of bistable reflection at incident powers of ~40 mW. The downstream reflections lead to hysteresis loops in the reflectivity that are topologically distinct from conventional Lorentzian-derived loops characteristic of isolated Fabry-Perot cavities. We provide a stability argument that reveals the unstable branches of these unique hysteresis loops, and we illustrate some of the rich bistable behaviors that can be engineered with such downstream sources, this fact may be used to obtain more flexibility in designing nonlinear devices.
Optical bistability device based on nonlinear one-dimensional photonic crystals is designed and manufactured. The device has 20 periods and is made from ZnS and ZnSe layers alternately. When the incident power density reach threshold power density 1.0 × 105 W/cm2, the Ar ion laser, whose wavelength is 514.5 nm, is shifted out of the optical band gap of the one-dimensional nonlinear photonic crystals, so an optical switch is made. It also can be made into an optical bistability device. The threshold power density of the optical bistability is 1.38 × 105 W/cm2 and its switching time is about 100 ps in experiment. The experimental results are in good accordance with the theoretical ones.