Review of Scientific Instruments

Low power high-performance radio frequency oscillator for driving ion traps

Yuan‐Yu Jau, Francisco Benito, Heather L. Partner, Peter D. D. Schwindt

Published Feb 1, 2011• 11 citations

Abstract

We report a simple, efficient, high voltage radio frequency (RF) generator powered by a single voltage source (1.5-7 V) to resonantly drive ion traps or other capacitive loads. Our circuit is able to deliver RF voltages > 500 V(p-p) at frequencies ranging from 0.1 to 10 MHz. This RF oscillator uses low-cost, commercially available components, and can be easily assembled onto a circuit board of a few cm(2). Because of its simplicity and good efficiency, this circuit is useful in applications requiring small size and low power consumption such as portable ion trap systems where the duration of operation under battery power is of concern.

DOI: 10.1063/1.3558569

Related papers

Compact radio-frequency resonator for cryogenic ion traps

Davide Gandolfi, M. Niedermayr, M. Kumph +2 more

We report on the investigation and implementation of a lumped-component, radio-frequency resonator used in a cryogenic vacuum environment to drive an ion trap. The resonator was required to achieve the voltages necessary to trap (~100 V), while dissipating very little power. Ultimately, for an input voltage of 1.35 V, a voltage gain of 100 was measured at 5.7 K, using a design which dissipated only 18 mW. The resonator operated at a frequency of 7.64 MHz and had a Q of 700. Single (40)Ca(+) ions were confined in a trap driven by this device, providing proof of successful resonator operation at low temperature.

arXiv:1204.5004Review of Scientific InstrumentsAug 1, 201220 citations

A compact radiofrequency drive based on interdependent resonant circuits for precise control of ion traps

Amelia Detti, Marco De Pas, Lucia Duca +2 more

Paul traps are widely used to confine electrically charged particles like atomic and molecular ions by using an intense radiofrequency (RF) field, typically obtained by a voltage drop on capacitative electrodes placed in vacuum. We present a RF drive realized on a compact printed circuit board and providing a high-voltage RF signal to a quadrupole Paul trap. The circuit is formed by using four interdependent resonant circuits - each of which is connected to an electrode of a Paul trap - fed by low-noise amplifiers, leading to an output voltage of peak-to-peak amplitude up to 200 V at 3.23 MHz. The presence of a single resonant circuit for each electrode ensures a strong control on the voltage drop on each electrode, e.g., by applying a DC field through a bias tee. Additionally, the moderate quality factor Q = 67 of the resonant circuits ensures a fast operation of the drive, which can be turned on and off in less than 10 μs. Finally, the RF lines are equipped with pickups that sample the RF in phase and amplitude, thus providing a signal that can be used to actively control the voltage drop at the trap's electrodes.

arXiv:1812.02018Review of Scientific InstrumentsFeb 1, 20198 citations

Two-phase driving of a linear radio-frequency ion trap

Santhosh Surendra, Akos Hoffmann, Michael Köhl

A linear radio-frequency Paul trap is traditionally driven with one diagonal pair of electrodes grounded and the other connected to a high-voltage radio-frequency source. This method simplifies impedance matching of the voltage source to the trap. However, for several architectures it leads to increasing the axial micromotion amplitude, for example, when the capacitance between radio-frequency and end-cap electrodes is not negligible. Here, we present a technique to generate two high-voltage radio-frequency signals \SI{180}{\degree} out of phase to drive a linear Paul trap with opposite voltages between neighbouring electrodes. Using this, we have successfully trapped and cooled a chain of Ytterbium ions in a linear radio-frequency Paul trap.

quant-pharXiv:2602.07700Review of Scientific InstrumentsFeb 10, 20260 citations

Development of low power and high voltage RF signal generator

Man Wang, Tianhong Zhou, Jie Shen

Abstract Ion confinement technology can be widely used in quantum computation and precision measurement. In ion trapping system, ions are stably trapped in ion trap by the action of external forces.Multi-ion confinement requires the joint action of electric field and magnetic field to make the trapped ions overcome the interaction force between ions and be stably confined in the same specific space. Therefore, the stability of the electric force and the magnetic force determines the stability of ion confinement. Although the electric field and magnetic field provided by traditional commercial instruments is stable, it is not conducive to the miniaturization of the device. According to the previous experiment of ion confinement, we have designed a radio frequency(RF) signal generator that can provide continuous low power and stable high voltage RF electric field for multi-ion confinement system to guarantee the stability of trapped ions in quadrupole linear ion trap, also to improve the tapped ions density.

Journal of Physics Conference SeriesNov 1, 20220 citations

Megahertz high voltage pulse generator suitable for capacitive load

Yu Xu, Wei Chen, Hao Liang +5 more

A high voltage pulse generator is presented to drive Pockels cell. The Pockels cell behaves like a capacitor which slows the rise/fall time of the pulse and restrains the repetition rate of the generator. To drive the Pockels cell applied in quantum communication system, it requires about 1 MHz repetition rate with the rise/fall time of the pulse less than 50 ns, adjustable amplitude up to 800 V and an adjustable duration. With the assistance of self-designed transformers, the circuits is simplified that a pair of high current radio frequency (RF) MOSFET drivers are employed to switch the power MOSFETs at a high speed, and the power MOSFETs shape the final output pulse with the requirements. From the tests, the generator can produce 800 V square pulses continously at 1 MHz rate with 46 ns in risetime and 31 ns in falltime when driving a 51 pF capacitive load. And the generator is now used to drive Pockels cell for encoding the polarization of photons.

AIP AdvancesNov 1, 201710 citations

Design and fabrication of ion traps for low RF power dissipation

Jonathan David Sterk, Matthew G. Blain, Matthew A. Delaney +13 more

Large surface-electrode ion traps with multiple trapping regions and junctions are a natural approach to scaling trapped ion quantum computers, supporting the connectivity and ion counts necessary for complex quantum algorithms. However, a major hurdle in this scaling is on-chip power dissipation from the applied RF voltage, which increases at a rate between linear and cubic relative to trap size, depending on whether the losses are dielectric or Ohmic. Here, we present two versions of a trap with features designed to reduce both types of RF power dissipation. The first variant contains a raised RF electrode that increases the electrode–ground distance to reduce capacitance. Different DC voltage sources are demonstrated on this trap to show that technical noise before the filter remains the dominant source of voltage noise and therefore motional heating. The second variant additionally includes a method for removing dielectric from beneath the RF electrode to further reduce dielectric losses. These traps were demonstrated at room temperature with 40Ca+ ions. The similar heating rates and heating rate axial frequency dependencies between 2.4 and 3.0 MHz illustrate that this dielectric modification is not detrimental to trap performance.

AVS Quantum ScienceJun 1, 20261 citation